MICRO COMPONENT SYSTEM CD-R/RW PLAYBACK MM-L4 / L4W Instruction Manual
Safety Warnings GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM. CAUTION RISK OF ELECTRIC SHOCK.
Contents GB You have just purchased a SAMSUNG micro component system. Please take the time to read these instructions, as they will enable you to set up your player easily and take full advantage of its features. INSTALLING YOUR MICRO COMPONENT SYSTEM Safety Warnings ........................................................................................................................... 2 Front Panel View ..................................................................................................
Front Panel View GB Push Open 8 1 9 On/Standby Repeat A B Volume 2 10 Band 3 4 PTY TUNER Mute CD RDS Display CD Sync. REC/ Pause 11 EQ TAPE Down AUX Tuning Mode 12 S.Bass Up Power Sound 13 5 Push Eject 6 14 15 7 16 1. On/Standby button 2. TAPE/CD Repeat (A B) button 3. PTY button(RDS) 4. Display button(RDS) 5. CD Synchro button 6. REC/Pause button 7. Function control buttons 8. CD Push Open button 9. Function selection buttons (TUNER/CD/TAPE) 4 10. Volume control buttons 11.
Rear Panel View GB 1 2 3 4 5 6 1. 2. 3. 4. 5. 6.
Remote Control GB On/Standby Timer On/Off Timer/ Clock 1 9 10 EQ Preset 2 3 Sleep Power Sound Program /Set CD Repeat Mono/ST. AUX TUNER 4 13 5 Band TAPE 6 CD 14 15 16 17 7 18 VOL. CD 8 6 11 12 TUNING MODE CD VOL. 19 20 1. On/Standby button 11. AUX button 2. EQ Preset button 12. Program/Set button 3. Power Sound button 13. Frequency band selection button 4. Sleep button 14. Mono/Stereo button 5. CD Repeat button 15. Tape Playback button 6.
Where to Install Your Micro-Component System To take full advantage of your new MICRO component system, follow these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never locate this unit in an outdoor area. Maintain an open space of approximately 4 inches (10 cm) on the sides and rear of the system, for ventilation purposes. Make sure that you have enough room to open the compact disc compartment easily.
Connecting the AM(MW)/LW Aerial GB The AM(MW)/LW aerial (for long and medium waves) can be: Connecting the FM Aerial There are two types of aerials, follow the instructions below (depending on option chosen). Placed on a stable surface Fixed to the wall (you must first remove the base) The AM aerial connector terminals are located on the rear of the system and are marked AM. 1 To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires.
Setting the Clock Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock: When you purchase the Micro component system After a power failure 3 Place your disc in the compartment, with the label on the disc facing upwards. 4 Close the compartment by pushing down on the cover until it clicks into place. Result: The display indicates the number of tracks on the disc. 5 Press the PLAY/PAUSE ( ) button.
Precautions When Using Compact Discs 3 GB Always hold them by the edges to avoid leaving fingerprints on the shiny surface Always replace them in their cases after listening to them Do not fix paper or adhesive tape to the discs and do not write on the label Select the required track by pressing the SKIP buttons: to move backwards through the tracks to move forwards through the tracks PROG To guarantee hours of enjoyable listening with your compact discs: 4 Press Program/Set.
Checking and Changing Programmed Tracks You can check and change your selection of tracks at any time. Searching for and Storing the Radio Stations You can store up to: 1 Press STOP ( ) once if you have started listening to the selection. 2 Press Program/Set. Each time you press Program/Set, the next selection is displayed. 3 Press Program/Set one or more times until the track to be changed is displayed. 4 5 6 Press SKIP or 1 2 4 To search for a station...
Searching for and Storing the Radio Stations(continued) 6 GB Adjust the volume by: Pressing VOLUME + or - on the front panel or Pressing the VOL. + or - buttons on the remote control 7 Select the stereo or mono mode by pressing Mono/ST. Result: The MONO indicator is displayed when selected. 8 If you do not want to store the radio station found, revert to Step 4 and search for another station. Otherwise: a Press Program/Set. Result: The program number and PROG are displayed for a few seconds.
About RDS broadcasting This unit has the RDS(Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 17 types of programs(News, Rock, Classic, etc.) to be received from the FM RDS station together with the normal radio signal. 1 2 3 Press the On/Standby button. Receive the FM radio. See the radio receiving method on the page 11~12.
PTY(Program Type) indication and PTY-SEARCH function GB ◆ The PTY information is composed of an identification symbol, which helps the FM radio to recognize the program type of each FM station. ◆ The below 30 PTY information is shown on the display by pressing the Pty button. Program Type Display NEWS • News including an announced opinion and report AFFAIRS • Several matters including a current incident, documentary, discussion and analysis.
MUTE Function Listening to a Cassette You can turn the sound off temporarily on your system. 1 2 3 Switch the system on by pressing On/Standby. Select the TAPE function by pressing TAPE on the front panel. Open the cassette deck by pushing on the corner of the cover marked PUSH EJECT until you hear a click and then releasing it. Insert the pre-recorded cassette with the open edge of the tape facing downwards. Close the deck by pushing on it until it clicks into place. Press the play( ) button.
Recording a Radio Programme GB You can record a radio programme of your choice and listen to it at a later date. Insert a blank cassette in the cassette deck. 2 Press TUNER/Band to select the radio function. 3 Select the radio station that you wish to records. 4 To start recording, press the REC/Pause button. Result: Recording starts immediately. 5 To stop recording temporarily, press the REC/Pause button. 6 When you wish to stop recording, press the STOP ( Sleep PTY CD Repeat Mono/ST.
Timer Function The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning. GB If you no longer want the system to be switched on or off automatically, you must cancel the timer. Before setting the timer, check that the current time is correct. For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
Sleep Timer GB Equalizer You can set the system to switch off automatically. Example: You wish to fall a sleep to music. 1 2 Press Sleep.
Power sound function Connecting to an External Source This machine is equipped with the function of POWER SOUND, which amplifies bass treble output to twice as much for powerful real surround-sound. 1 Press the P. Sound button on the front panel. Result: P--SOUND is displayed for a few seconds. A more powerful resonant sound is diffused. 2 To cancel this function, press Power Sound again.
Safety Precautions GB Before Contacting the After-Sales Service The following diagrams illustrate the precautions to be taken when using or moving your Micro component system. 10% It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the solutions given. They may save you the time and inconvenience of an unnecessary service call.
Technical Specifications GB SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. TUNER FM Signal/noise ratio Usable sensitivity Total harmonic distortion AM (MW) Signal/noise ratio Usable sensitivity Total harmonic distortion LW Signal/noise ratio Usable sensitivity Total harmonic distortion 60 dB 16 dB 0.
THIS APPLIANCE IS MANUFACTURED BY: ELECTRONICS AH68-00955U
