3CD CHANGER MICRO AUDIO SYSTEM MM-89 Owner’s Instructions
Contents Safety Warnings GB Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. CAUTION RISK OF ELECTRIC SHOCK.
Connecting the Loudspeakers GB The loudspeaker connector terminals are located on the rear of both the system and the loudspeakers (red and black tabs in both cases).
Setting the Clock Listening to a Compact Disc For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. GB 1 2 3 4 Switch the system on by pressing POWER. Result: The various indicators and LCD light up. To... button. Set desired minute by using To... 6 or button. Press PLAY/PAUSE ( the disc. Press... Increase the minutes Decrease the minutes 7 You can hold the and rapidly through the figures.
Programming the Order of Playback GB You can decide for yourself: The order in which you listen to the tracks The tracks to which you do not wish to listen This feature can be combined with the Repeat function. 1 2 3 4 5 If necessary, stop the player by pressing STOP ( ). Checking and Changing Programmed Tracks You can check and change your selection of tracks at any time. Press PROG/SET. Result: P-02-- is displayed. To select other tracks, repeat Steps 3 and 4. You can programme up to 15 tracks.
About RDS broadcasting (OPTION) GB This unit has the RDS(Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 17 types of programs(News, Rock, Classic, etc.) to be received from the FM RDS station together with normal radio signal. 1 Press the POWER button. 2 Receive the FM radio. See the radio receiving method on the page 9.
Listening to a Cassette Maintaining the Sound Quality You can listen to any type of audio cassette with this player. To obtain the best possible results from your cassette player, you must clean it regularly (heads, roller and drive capstan). GB 1 2 3 Open the cassette deck by pressing the PUSH OPEN button. Insert the pre-recorded cassette with the open edge of the tape facing downwards and close the deck by pushing on it until it clicks into place. Press the PLAY ( or ) button.
Timer Function-Playback GB AI Sleep Timer The timer enables you to switch the player on and/or off at specific times. Example: You wish to wake up to music every morning. The timer can be used to start the radio, the compact disc player or the cassette deck. The timer is set by pressing the CD or buttons. You can hold them down to scroll rapidly through the figures. You can set the timer even when the player is in standby mode (check, however, that the current time is correct).
Connecting Headphones GB You can connect a set of headphones to your micro component system so that you can listen to music or radio programmes without disturbing other people in the room. The headphones must have a 3.5 mm jack or appropriate adapter. Connecting to an External Source The auxiliary input can be used to take advantage of the sound quality of your micro component system when listening to other sources.
Rear Panel View Remote Control GB GB 31 1 2 5 3 4 1 5 6 6 3 7 8 9 10 11 4 12 13 2 30 29 28 27 26 25 24 23 22 21 20 19 14 15 18 17 16 1. MAINS LEAD CONNECTION SOCKET 2. CD DIGITAL OUT JACK(OPTION) 3. AUXILIARY SOURCE CONNECTORS 4. LOUDSPEAKERS CONNECTOR TERMINALS 5. MW/LW(OPTION) 6. FM CONNECTION 18 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Technical Specifications GB SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. RADIO Long and Medium Wave FM Signal/noise ratio Usable sensitivity Total harmonic distortion AM (MW) Signal/noise ratio Usable sensitivity Total harmonic distortion LW (optional) Signal/noise ratio Usable sensitivity Total harmonic distortion 55 dB 12 dB 1.
