Monochrome Laser Printer User's Guide

Installing Printer Software in Windows
10
Reinstalling Printer Software
You can reinstall the software if installation fails.
1 Start Windows.
2 From the Start menu select Programs or All Programs
→ your printer driver name → Maintenance .
3 Select Repair and click Next .
4 The list of printers available on the network appears.
Select the printer you want to install from the list and then
click
Next .
• If you do not see your printer on the list, click
Update to
refresh the list, or select
Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the
Browse
button.
You will see a component list so that you can reinstall any
item individually.
NOTE : If your printer is not already connected to the
computer, the following window will appear.
• After connecting the printer, click Next .
• If you don’t want to connect the printer at this time, click
Next , and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The reinstallation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
5 Select the components you want to reinstall and click
Next .
If you installed the printer software for local printing
and
you select your printer driver name , the window
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click
Next .
b. If the test page prints out correctly, click Yes .
If it doesn’t, click No to reprint it.
6 When the reinstallation is done, click Finish .