Monochrome Laser Printer User's Guide
Table Of Contents
- Guide_EN
- Contents
- Introduction
- Basic setup
- Software overview
- Loading print media
- Network setup(ML-2851ND only)
- Basic printing
- Ordering supplies and accessories
- Maintenance
- Troubleshooting
- Installing accessories
- Specifications
- Index
- Software section
- Software section Contents
- Installing Printer Software in Windows
- Basic Printing
- Advanced Printing
- Using Windows PostScript Driver
- Sharing the Printer Locally
- Using Smart Panel
- Using Your Printer in Linux
- Using Your Printer with a Macintosh
- Software section Index
9.2 <
Troubleshooting>
4 Pull the paper straight up and out.
5 Insert the trays back into the printer. Printing automatically
resumes.
In the manual tray
1 Remove the jammed paper from the printer.
2 Open and close the front cover.
3 Load a paper into the manual feeder, then the printer resumes.
Around the toner cartridge
Note
The fuser area is hot. Take care when removing paper from the
printer.
1 Open the front cover and pull the toner cartridge out.
2 Remove the jammed paper by gently pulling it straight out.
3 Replace the toner cartridge and close the front cover. Printing
automatically resumes.