Laser Printer User's Guide
Table Of Contents
- User's Guide
- Contents
- 1 Introduction
- 2 Setting Up Your Printer
- 3 Using the Control Panel
- 4 Using Print Materials
- 5 Basic Printing
- 6 Maintaining Your Printer
- 7 Solving Problems
- 8 Using Your Printer on a Network
- 9 Installing Printer Options
- 10 Specifications
- Index
- Software section
- Software section Contents
- 1 Installing Printer Software in Windows
- 2 Basic Printing
- 3 Advanced Printing
- 4 Using Windows PostScript Driver
- 5 Sharing the Printer Locally
- 6 Using Smart Panel
- 7 Using Your Printer in Linux
- 8 Using Your Printer with a Macintosh
- Software section Index
Solving Problems
7.7
In the Paper Exit Area (Paper Jam 2)
1
If a long portion of the paper is visible, pull it straight out.
Go to step 5.
If you cannot find jammed paper, or if there is any
resistance removing the paper, stop pulling and go to step
2.
2
Open the rear cover.
3
Loosen the jammed paper if it is caught in the feed rollers.
Then gently pull the paper straight out.
4
Close the rear cover.
5
Open and close the top cover. The printer will resume
printing.
In the Duplex Area (Duplex Jam 1,2)
In the Duplex Area (Duplex Jam 1)
1
Open the rear cover.
2
Gently pull the paper straight up.
3
Close the rear cover.
4
Open and close the top cover. The printer will resume
printing.