Laser Printer User's Guide
Table Of Contents
- User's Guide
- Contents
- 1 Introduction
- 2 Setting Up Your Printer
- 3 Using the Control Panel
- 4 Using Print Materials
- 5 Basic Printing
- 6 Maintaining Your Printer
- 7 Solving Problems
- 8 Using Your Printer on a Network
- 9 Installing Printer Options
- 10 Specifications
- Index
- Software section
- Software section Contents
- 1 Installing Printer Software in Windows
- 2 Basic Printing
- 3 Advanced Printing
- 4 Using Windows PostScript Driver
- 5 Sharing the Printer Locally
- 6 Using Smart Panel
- 7 Using Your Printer in Linux
- 8 Using Your Printer with a Macintosh
- Software section Index
Using the Control Panel
3.10
Config
Netware
You can set this item only when you set
Netware
to
On
. This item lets you select
whether or not you set the frame type
parameter.
Select
Yes
to select the frame
type.
If you select
Yes
, the
IPX Frame Type
option appears on the display.
IPX Frame
Type
You can select this item only when you set
Config Netware
to
Yes
. This item lets you
select the IPX frame type.
•
Auto
: You can set the frame type
automatically.
•
EN_8023
: Select this value to use the IEEE
802.3 frame type.
•
EN_II
: Select this value to use the
ETHERNET II frame type.
•
EN_8022
: Select this value to use the IEEE
802.2 frame type.
•
EN_SNAP
: Select this value to use the SNAP
frame type.
Reset
Network
This item reboots the network interface card.
Default Set
This item performs a simple reset and
restores the factory default settings for the
network configuration.
This setting will only
take effect after you have reset the printer.
Print Net CFG
This item print a page showing the network
parameters you set.
Item Explanation
Values: Yes, No*
Values: Auto*, EN_8023, EN_II, EN_8022,
EN_SNAP