Laser Printer User's Guide

Using Your Printer with a Macintosh
35
8 Using Your Printer with
a Macintosh
Your machine supports Macintosh systems with a built-in
USB interface or a 10/100 Base-TX network interface
card. When you print a file from a Macintosh computer,
you can use the PostScript driver by installing the PPD
file.
N OTE : Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
•Printing
Installing Software for
Macintosh
The PostScript driver CD-ROM that came with your
machine provides you with the PPD file to use the PS
driver, Apple LaserWriter driver, for printing on a
Macintosh computer.
Verify the following before you install the printer software:
1 Connect your machine to the computer using the USB
cable or the Ethernet cable.
2 Turn on your computer and the machine.
3 Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4 Double-click the Samsung_LBP on your Macintosh
desktop.
5 Double-click the Installer folder.
6 For Mac OS 8.6~9.2, double-click the Samsung_LBP
Installer Classic
icon.
For Mac OS 10.1 or higher, double-click the
Samsung_LBP Installer OSX icon.
7 Click Continue .
8 Click Install .
9 After the installation is finished, click Quit .
Item Requirements
Operating system Mac OS 8.6 ~ 9.2/10.1 or hihger
RAM
Mac OS 8.6~9.2 64 MB
Mac OS 10.1 or hihger 128 MB
Free disk space 200 MB
Connection USB interface, Network interface