Laser Printer User's Guide
Table Of Contents
- User's Guide
- Contents
- 1 Introduction
- 2 Setting Up Your Printer
- 3 Using the Control Panel
- 4 Using Print Materials
- 5 Basic Printing
- 6 Maintaining Your Printer
- 7 Solving Problems
- 8 Using Your Printer on a Network
- 9 Installing Printer Options
- 10 Specifications
- Index
- Software section
- Software section Contents
- 1 Installing Printer Software in Windows
- 2 Basic Printing
- 3 Advanced Printing
- 4 Using Windows PostScript Driver
- 5 Sharing the Printer Locally
- 6 Using Smart Panel
- 7 Using Your Printer in Linux
- 8 Using Your Printer with a Macintosh
- Software section Index
Using Your Printer in Linux
30
7 Using Your Printer in
Linux
You can use your printer in a Linux environment.
This chapter includes:
• System Requirements
• Installing the Printer Driver
• Changing the Printer Connection Method
• Uninstalling the Printer Driver
• Using the Configuration Tool
• Changing LLPR Properties
System Requirements
Supported OS
• Redhat 6.2/7.0/7.1 and above
• Linux Mandrake 7.1/8.0 and above
• SuSE 6.4/7.0/7.1 and above
• Debian 2.2 and above
• Caldera OpenLinux 2.3/2.4 and above
• Turbo Linux 6.0 and above
• Slackware 7.0/7.1 and above
Recommended Capacities
• Pentium IV 1 GHz or higher
• RAM 256 MB or higher
• HDD 1 GB or higher
Software
• Glibc 2.1 or higher
• GTK+ 1.2 or higher
•GhostScript
N
OTES
:
• The Linux printer’s properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the properties is similar.
• You can check your printer name in the supplied CD-
ROM.