Laser Printer User's Guide
Table Of Contents
- User’s Guide
- Contents
- 1 Introduction
- 2 Setting Up Your Printer
- 3 Using Print Materials
- 4 Maintaining Your Printer
- 5 Solving Problems
- 6 Specifications
- Index
- Software User’s Guide
- Contents
- 1 Installing Printer Software in Windows
- 2 Basic Printing
- 3 Advanced Printing
- 4 Sharing the Printer Locally
- 5 Using Status Monitor
- 6 Using Your Printer in Linux
- Index
U
SING
P
RINT
M
ATERIALS
3.9
3
•Load transparencies in the tray
with print side up
, and the
top with the adhesive strip going first
.
Notes:
• To prevent transparencies from sticking to each other, do not let
the printed sheets stack up as they are printed out.
• Place transparencies on a flat surface after removing them from
the printer.
• Do not use transparencies that are separating from the backing
sheet.
•Load card stock
with print side up
, short edge first and
center of the tray.
•Load letterheads in the tray
with the design face up
,
top
edge towards the printer
.