Technical data

200
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE
Individual control of
a remote controller
Heating setting
compensation
EEV opening of an
indoor unit stopped
during oil return or
defrost operation.
Motion detect sensor
Remote
Controller
Display
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details
0. No Use (Factory Setting)
1. Standard Mode/
Auto Set OFF 30 Min.
2. Standard Mode/
Auto Set OFF 60 Min.
3. Standard Mode/
Auto Set OFF 120 Min.
4. Standard Mode/
Auto Set OFF 180 Min.
5. Premium Mode/
Auto Set OFF 30 Min.
6. Premium Mode/
Auto Set OFF 60 Min.
7. Premium Mode/
Auto Set OFF 120 Min.
8. Premium Mode/
Auto Set OFF 180 Min.
Indication
Details
3
0 or 1
channel 1 0 Disuse 0 150 step
2
channel 2 1 2°C
1 0 step
3
channel 3 2 5°C
4
channel 4
X When changing a digit of an indoor unit address setting option, set the SEG3 as ‘A’.
X When changing a digit of indoor unit installation option, set the SEG3 as ‘2’.
;
Note
7-4. Changing a particular option
You can change each digit of set option.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to
change
The tens’ digit of an
option SEG you will
change
The unit digit of an
option SEG you will
change
The changed value
Remote
Controller
Display
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0D
Option
mode
0~F
Tens’ digit
of SEG
0~9
Unit digit
of SEG
0~9
The
changed
value
0~F
Ex) When setting the 'buzzer control' into disuse status.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to
change
The tens’ digit of
an option SEG
you will change
The unit digit of
an option SEG
you will change
The changed
value
Indication 0 D 2171
7
Setting an indoor unit address & installation option