Installation manual

E-20
Setting the Computer Environment (Continued)
 Select either the group mode tracking or the room mode tracking.
 Group mode tracking:
Control the indoor units according to the RMC address.
 Room mode tracking:
- Control the indoor units according to the MAIN address of
the indoor units.
- Indoor unit MAIN address and the RMC address will be
displayed.
The message “Tracking...Please wait.” will be displayed while
tracking. Tracking will take at least a few seconds to at most
three minutes.
Tracking
Click on the tracking button once the environment is set.
The above screen will be displayed.
MIM-D00_IM_E_29919-1.indd 20 2008-09-10 ｿﾀﾈﾄ 1:27:27