Installation manual

E-16
Setting the Computer Environment (Continued)
4
Setting the computer environment to access the DMS for
the first time.
All the environment of the DMS is set by connecting
to the DMS. In order to access the DMS, the computer
environment must be set as follow:
Choose one of the two methods to access the DMS.
1) Change the computer IP address (Recommended)
Set the network environment of the computer
connected to the DMS as follow:
Click on the My Network’ icon on the desktop to access the above screen.
Right click and press ‘properties.
Right click on the ‘Local Area Network’ icon and press ‘properties’.
Select ‘Internet protocol(TCP/IP)’ and press ‘properties’.
2) Run the route command
Start Run Type in the following command Enter
Route add 192.168.0.0 mask 255.255.255.0 *Computer_IP
The computer IP refers to the IP address of the computer connected or
that is to be connected to the DMS
Type in 192.168.0.1 when using a private IP.
Note Refer to page 24~25 for setting the IP address.
The default IP setting of the DMS is 192.168.0.2
MIM-D00_IM_E_29919-1.indd 16 2008-09-10 ソタネト 1:27:26