Installation manual

E-11
ENGLISH
Installing the DMS (Continued)
POWER CABLE
Peak Power I/M
communication cable
LAN CABLE
5
Connect the LAN cable to the J6 terminal of the DMS.
6 Close the case cover after making sure the power cable is
not pressed.
7
Assemble the cover as shown in the picture to avoid
exposure of the stripped wires.
Maximum 8 SIM I/Ms can be connected to one DMS.
Maximum 8 power meters can be connected to one SIM I/M.
Separate the power cable and the communication cable
when installing the DMS. (The DMS may malfunction
due to electrical disturbance.)
Caution
MIM-D00_IM_E_29919-1.indd 11 2008-09-10 ソタネト 1:27:21