User Manual

E-84
System Settings
Adding a User
You can add, edit and delete the user of DMS2.
1
Click [System Settings]  [User management] when DMS2 web page menu screen
appears.
2
Click [Add user] when user management screen appears.
 User information input window will be appeared when pressing [Add user].
3
Enter ID, password, name and description for new user and then select authority.
 ID should be within 12 letters. You can use small letter and number only.
(Big letter and special symbols including space cannot be used for user ID.)
 Password should be within 12 letters. You can use small letter/big letter,
number(except space) only.
 Name should be within 20 letters, and description should be in 50 letters.
 Registration date will be input automatically as system date.
 Select authorization for the user from 'Admin', 'Manager' and 'Regular user'.
Admin has all authorization and 'Manager'/'Regular user' has limited authorization.
4
Click [Save].
 There is no limit to the number of user.
 User information will be saved in DMS2.
Note For security and maintenance of admin account and guest account, you should
change the password.
Administrator(Admin) can change all setting of indoor/outdoor unit.
Administrator(Admin) can check all indoor/outdoor units connected to DMS2.
Administrator(Admin) can edit zone information and assign the zone
information to manager.
A manager can check and control indoor/outdoor units which belong to
assigned zones only.
1
2
3
4
MIM-D00A_DMS2_IB_E 32140-2.indd 84 2010-05-17 ｿﾀﾀ・10:42:30