User Manual

E-22
Control and Monitoring (Continued)
8
Select the air flow.
 You can select Vertical, Horizontal, All and None air flow.
9
Set remote controller settings.
 You can select ON, OFF and Level1.
 When selecting [OFF], indoor unit control by wired/
wireless remote controller and indoor unit panel is not
possible. Indoor unit control is only available in DMS2 web
page.
 Click [ON] when you want to use wired remote controller
in each room.
Note When filter warning sign is displayed on indoor unit
status window
Select the indoor unit and click [Reset filter].
Filter warning will be released.
 Make sure that each indoor unit must be turned on to
control.
 Selecting remote controller, reset filter, operation
mode limits, setting lower/upper temperature limit are
possible even if the power of indoor unit is off.
 Some air flow option may be restricted depending on
the indoor unit model.
8
9
MIM-D00A_DMS2_IB_E 32140-2.indd 22 2010-05-17 ｿﾀﾀ・10:42:15