User Manual

E-145

Safety Halt

1. Check main menus by pressing [Menu], [▲], [▼] or [Set] button.

192.168.0.100

06:12:13(AM)

MAIN MENU

10.Safety Halt

Are you sure?

YES:Set, NO:Menu

Now sleeping..

See you again

BUTTON LOCKED

07:30:21(AM)

3. Press [Set] button.

 

Confirm message will appear.

2. Select 10.Safety Halt by pressing [

▲] and [▼] buttons.

4. Press [Set] button.

 

All functions of DMS2 will stop and 'Now Sleeping..' phrase will appear.

Note

Safety halt function is an operation that saves data of DMS2 and then

stops service safely. Use this function when relocation and system restart

are needed.

This function will not transfer DMS2 power to OFF status. Therefore, when

the screen above appears, press [RESET] button on the bottom of DMS2 or

remove power cable. If you do not press [RESET] button or remove power

after 10 minutes passed, DMS2 will restart automatically.

MIM-D00A_DMS2_IB_E 32140-2.indd 145 2010-05-17 ｿﾀﾀ・10:42:50