Split - type Air Conditioner EΛΛHNIKA (Cooling and Heating) DEUTSCH PORTUGUÊS ITALIANO FRANÇAIS ESPAÑOL AQV09VA Series AQV12VA Series AQV18VA Series AQV24VA Series ENGLISH USER’S MANUAL E S F I P D G DB98-27268A(1) Vivace_Inv_IB_E.
Contents PREPARATION Safety Precautions ......................................................................................................... Name of Each Part ......................................................................................................... Remote Control – Buttons and Display ............................................................... Inserting the Remote Control Batteries ............................................................... Getting Started ..........
ENGLISH Register your product at www.samsung.com/global/register Safety Precautions The following safety precautions are provided to protect the users’ safety and prevent property damage. Make sure to read the followings and use the air conditioner properly. Keep this user’s manual together with the installation manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly. WARNING This indicates the possibility of serious injury or death.
WARNING DURING OPERATION Do not attempt to repair, move, modify or reinstall the unit on your own. Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire. When using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable) Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center.
ENGLISH WARNING DISPOSING THE UNIT Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons. When you need to dispose of Please recycle or dispose Install the outdoor unit so as Install the drain hose to let the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin, causing injury.
CAUTION REGARDING POWER SOURCE Disconnect the circuit breaker Contact the service center or Contact the service center Do not open the front grille Avoid cold and hot air Avoid the water from Do not use the air conditioner Do not step on the air Do not drink the water from when you don’t use the air conditioner for a long time to save energy. manufacturer if you want to repair the air conditioner.
ENGLISH CAUTION DURING OPERATION Do not touch the pipes connected to the air conditioner. Do not use the air conditioner Do not give excessive shock The appliance is not intended The maximum input power & Do not clean the air The surface of the heat Dispose of the packaging All of the manufacturing and to maintain the machine, food, pet, plant or cosmetics. to the air conditioner. OTHERS Be sure that the air filter not to be exposed to direct sunlight.
Name of Each Part The design and shape can be changed according to the model. Indoor Unit Air Inlet Room Temperature sensor Power(On/Off) button Air filter (under the panel) Airflow blade (outlet) MPI(Micro Plasma Ion) mode indicator Timer/Good Morning mode indicator Auto cleaning indicator Set temperature & room temperature AQVVWA Series Operation indicator AQVVBA Series E-8 Vivace_Inv_IB_E.
ENGLISH Outdoor Unit AQV09VASeries AQV12VASeries Air Inlet (Rear) Air Outlet Connection Valve (Inside) Outdoor Unit AQV18VASeries AQV24VASeries Air Inlet (Rear) Air Outlet Connection Valve (Inside) E-9 Vivace_Inv_IB_E.
Remote Control-Buttons and Display Airflow direction indicator Operating mode indicator (Auto, Cool, Dry, Fan, Heat) Temperature setting MPI(Micro Plasma Ion) mode indicator Turbo function indicator Silence indicator Fan speed indicator Energy saving indicator Remote control transmission indicator Off Timer indicator Battery life indicator Good Morning mode indicator On Timer indicator Power (On/Off) button Temperature adjustment buttons Mode selection button (Auto, Cool, Dry, Fan, Heat) Swing butt
ENGLISH Getting Started The User’s Manual provides you with valuable information about your air conditioner. In order to take full advantage of the air conditioner’s features, please read this manual carefully before using. You have already seen the basic description of the unit on pages from 8 to 10. Starting with the next page, you will find a series of step-by-step procedures for each function available.
Selecting Auto Mode You can select Auto mode if you want to cool or heat your room automatically. You can adjust the temperature in this mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Auto is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Auto mode.
ENGLISH Selecting Cool Mode You can select Cool mode if you want to cool your room. You can adjust the temperature and the fan speed when cooling. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Cool is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Cool mode.
Selecting Heat Mode You can select Heat mode if you want to heat your room. You can adjust the temperature and the fan speed when heating. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Heat is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Heat mode.
ENGLISH Selecting Dry Mode Select Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Dry is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in the Dry mode.
Selecting Fan Mode Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Fan is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Fan mode.
ENGLISH Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling. The temperature range decreases in order to perform this function. 1 Press the Result: 2 button. Press the Result: The indoor unit beeps. The air conditioner runs in the Energy saving function. The outer airflow blade moves up and down. The airflow direction indicator is displayed automatically. again.
Selecting Good Morning Mode Good Morning mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The Good Morning mode can be selected only when the air conditioner is switched on or off in cool/heat mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button to select cool or heat mode.
ENGLISH In cool mode Good Morning mode keeps the skin temperature at the best during the 3 stages such as, Falling Asleep Stage Sound Sleep Stage Wake Up Stage in order. Falling Asleep Stage : This stage supports the environment to quickly cool down. Together with comfortable intermittent air, you will be able to fall asleep quickly. Sound Sleep Stage : This stage helps users to take deep sleep and keep the healthy skin by controlling wavy temperature control and insensible air stream.
Adjusting the Airflow Direction Adjust the airflow direction to circulate the air according to various needs. By adjusting the airflow direction, the efficiency of the air conditioner can be increased. Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically.
ENGLISH Selecting the Auto Cleaning Function You can select the Auto Cleaning Function if you want to sterilize the air conditioner or remove mold. You can set this function even when the air conditioner is turned off. 1 2 Press the Result: Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. button.
Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the 2 Press the or buttons until the desired time is displayed to set the On Timer. You can set the time between 0.5 hour and 24 hours. 3 Press the Result: 4 button . button to complete the setting. The remaining time is displayed. The timer indicator stops blinking.
ENGLISH Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the 2 Press the or buttons until the desired time is displayed to set the Off Timer. You can set the time between 0.5 hour and 24 hours. 3 Press the button . button to complete the setting. Result: The remaining time is displayed. The timer indicator stops blinking.
Selecting Silence Function Silence function makes the noise much quieter during the operation of the indoor unit. The silence function is set only in cool and heat mode. 1 Press the Result: 2 Press the Note (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. button. By Pressing the button again, the silence function is canceled.
ENGLISH Selecting MPI (Micro Plasma Ion) Mode The Micro Plasma Ion mode creates strong purified zone by decomposing harmful particles in the behavior of active hydrogen(H) and oxygen ion(O₂). The MPI mode can be selected whether the air conditioner is turned on or not. 1 Press the button. The air conditioner starts up in MPI-Auto mode automatically. The MPI mode also runs when the air conditioner is turned on. By pressing the button again, the MPI mode is canceled.
Cleaning Air Filter on Your Air Conditioner For the best use of your air conditioner, you must clean it every 2 weeks regularly to remove the dust that accumulates on the air filter. CAUTION Front panel Body groove Body 1 Open the front panel by pulling tabs on the lower right and left sides of the indoor unit. 2 Detach the front panel by pulling it forwards. 3 Hold the edge of the air filter under the front panel and pull to release.
ENGLISH Replacing Deodorizing Filter Activated carbon is incorporated in the Deodorizing filter, efficiently absorbing cigarette smoke, pet odors and other unpleasant smells. 1 Open the upper front panel by pulling the lower right and left tabs of the panel. 2 Detach the deodorizing filter(black) by pulling it forwards. 3 Replace the deodorizing filter with a new one into the slot. Use the deodorizing filter you purchased after removing the vinyl wrap.
Operating Recommendations When you use your air conditioner, it is recommended that you read the following: Topic Recommendation Heating capacity The heat pump inside the air conditioner absorbs heat from outside air and brings itindoors. If the temperature of the outside air drops, the air conditioner heats less. If the room is not warm enough, use an additional heating appliance. Warm air circulation The air conditioner circulates warm air to heat your room.
ENGLISH Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation/Solution The air conditioner does not operate at all. Check if power is on and operate the air conditioner again. Check if the circuit breaker is switched off. Check if Off Timer is set. The temperature is not adjusted. Check if you selected the Fan mode.
Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung product, contact the SAMSUNG customer care center. Country BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K Ireland Moderato_IB_E.