Quick Guide

6
General information
# 1 and #2 Phillips
screwdriver
Pencil Ruler or tape measure
and straight edge
Carpenter square (optional)
Tin snips (for cutting
damper, if required)
Scissors (to cut template,
if necessary)
Electric drill with
3
/
16
", ½"
and ⅝" drill bits
Filler blocks or scrap wood pieces, if needed
for top cabinet spacing (used on recessed
bottom cabinet installations only)
Gloves Saw (saber, hole or
keyhole)
Stud nder or Hammer
(optional)
Safety goggles
Level Duct and masking tape
TOOLS YOU WILL NEED
• If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by
arrangement between the customer and installer.
DAMAGE - SHIPMENT/INSTALLATION
HARDWARE PACKET
PART QUANTITY
Template
INSTALLATION
INSTRUCTIONS
Wood Screws (¼"x2") 1
Template
INSTALLATION
INSTRUCTIONS
Toggle Bolts
(andwingnuts)
(
3
/
16
"x3")
2
Template
INSTALLATION
INSTRUCTIONS
Self-aligning Machine
Screws (¼" - 28 x 3 ¼")
2
You will nd the installation hardware contained in a
packet with the unit. Check to make sure you have all
these parts.
NOTE: Some extra parts are included.
ADDITIONAL PARTS
PART QUANTITY
TOP CABINET TEMPLATE
REAR WALL TEMPLATE
Top Cabinet Template 1
TOP CABINET TEMPLATE
REAR WALL TEMPLATE
Rear Wall Template 1
Installation Instructions 1
One Touch Easy Grease
Filter
1
(Installed)
Template
INSTALLATION
INSTRUCTIONS
Exhaust adaptor 1
PARTS INCLUDED
DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 6DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 6 2024-03-05 오전 11:50:112024-03-05 오전 11:50:11