Portable MP3-CD Player MCD-SM60 . MP3-CD/CD-R/RW Playback Instruction Manual AH68-01001R Downloaded From Disc-Player.
Main Features SBS function ESP function The SBS function produces rich, deep bass tones for a more powerful overall sound. The ESP function ensures high resistance to shock or vibration so that the sound signal remains undisturbed ( up to 120 seconds for MP3 and 45 seconds for a CD). Random function The Random function allows you to play tracks in random order. Album function (MP3-CD Only) The Album function allows easy browsing and searching of your favorite tunes by album name, song title and artist.
Safety Warning Take care not to allow dust or other contaminants to come into contact with your player. Do not apply heavy pressure to the player. Do not leave your player in direct sunlight or near a heat source. Headphone Road safety ● Do not use the headphones while riding a bicycle, driving any kind of motor vehicle or motorcycle. This is very dangerous and is illegal in certain regions. It is dangerous to listen to headphones at high volume while crossing roads.
Buttons and Controls 4 5 6 7 3 2 1 9 10 11 12 8 8. Mode button (Refer to page 15) 9. Open switch 1. STOP button ( 2. Program button 3. Power Input Jack (Refer to page 9) 10. Skip/Search buttons ( 4. ESP/Album button 11. Volume 5. +10 button (Refer to page 17) 12. Headphone Connection jack 6. Play/Pause button ( 13. Line Out output jack 7.
Buttons and Controls Display The picture of the display panel below is based on MP3-CD playback. 1 PROGRAM 2 3 REP 1 SBS 4 ALL RANDOM 5 ALBUM ESP 6 7 8 9 12 11 1. PROGRAM indicator 7. Playtime indicator 2. SBS Indicator 8. Album Name indicator (MP3-CD Only) 3. RANDOM indicator 9. Title (track title & artist) indicator (MP3-CD Only) 4. REPEAT indicator (Anti-shock Time) 10. Anti-S.T. Buffer Level meter 5. ESP Indicator 11. Track Number indicator 6.
Preparation before using your unit Using the AC adapter (not supplied) 1 2 Connect the AC adaptor to the power input jack. Then, connect the AC plug of the adaptor to the AC outlet. Using rechargeable batteries (not supplied) 1 • Only use the AC adaptor supplied with your product. •As shown in the illustration, carefully strip the sheath of the negative (-) terminal by 6 mm. When you are not using this product, disconnect the AC adaptor from the AC outlet.
CD Playback Preparation before using your unit Using standard batteries (not supplied) 1 2 1 Open the cover of the battery compartment. Slide the OPEN button to open the door. Insert a CD. Open •Push the door to close it. 2 Carefully check the correct orientation of the positive and negative terminals of the batteries. Press the Play/Pause ( ) button. •Once the CD is recognized, playback commences. Track Number Indicator Playtime Indicator •Use two AA type 1.5 V batteries.
Skip/Search function MP3-CD Playback 1 Skip Slide the OPEN button to open the door, and insert an MP3-CD. Press and release the during playback of a CD. Open • Push the door to close it. 2 Press the Play/Pause ( ) button. •The inserted MP3-CD will be scanned for about 30~90 seconds. Playback will then commence. Track Number indicator Album Number indicator Playtime indicator •Press the button while the unit is in “Stop” (no playback) mode. Track 2 will be played back.
SBS/Last Memory function Mode function Briefly press the Mode button to activate the Repeat function or hold it down for longer to activate the Random function. SBS (Super Bass Sound) function Repeat function Press the Mode button. •Each time the button is pressed, REP1, REP ALBUM and REP ALL are selected. (REP ALBUM mode only works for MP3-CD disks which contain albums.
ESP/Album function ESP (Electronic Skip Protection) function ESP prevents the music being interrupted by vibration and shock. Album Function •This function is only available during playback of an MP3-CD. Albums are sections of tracks representing one artist. This function makes it easier to skip between them. Press the ESP/Album button. Press the ESP/Album button. •CD Playback: Press the ESP/Album ESP button to turn this function on and off.
Program function You can store up to 30 tracks of your favorite tunes. Example: When storing track number 15 to program number 1. 1 From Stop mode, press the Program button on the main unit. To confirm the program PROGRAM •From Stop mode, press the Program button. •Each time the button is pressed, track numbers will be shown on the display according to their program sequence. 2 Using or or +10 button, select the desired track.
Features Maintaining and looking after your unit Playback sequence of albums and tracks •When using Windows Explorer. •The arrows indicate playback sequence of albums and tracks. •Albums with .jpg, .wav or .doc are not audio files and therefore will be skipped. Looking after your CDs Wash the disc with a neutral detergent diluted in water, and then wipe gently with a soft dry cloth from the center of the disc to the outside.
Troubleshooting Guide Problem Check ● Unit has no power. ● ● ● ● ● ● Playback does not function. ● Did you insert the battery with the correct polarity? Are the batteries drained? Is the AC adaptor connected correctly? Is the door open? Is the disc inserted correctly? Is the disc damaged or deformed? Has the unit been locked with the HOLD switch? Has the unit been moved from a cold place to a hot place? Abrupt change of temperature may cause condensation to form on the lens.
Memo ELECTRONICS Samsung Limited Warranty Samsung Electronics Canada Inc. (SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA authorized service centre.
