User Manual

English 93
Oven use
6
6. Press the START/+30s button.
Result: Combination cooking starts. The
oven is heated to the required
temperature and then microwave
cooking continues until the
cooking time is over. When it has
nished.
1) The oven beeps 4 times.
2) The end reminder signal will beep
3 times (once every minute).
3) The current time is displayed again.
Switching the beeper off
You can switch the beeper off whenever you want.
1
2
1. Press the START/+30s and STOP/ECO
button at the same time.
Result: The oven does not beep to
indicate the end of a function.
•The following indications are displayed.
2. To switch the beeper back on, press the
START/+30s and STOP/ECO button again
at the same time.
Result: The oven operates normally.
•The following indications are displayed.
4
5
3
3. Select the appropriate power level by
turning the Multi Function Selector Dial
until the corresponding output power is
displayed (600, 450, 300, 180, 100 W).
At that time, press the Multi Function
Selector Dial to set the power level.
•If don’t set the power level within
5 seconds, Automatically changes to the
cooking time setting stage.
(Default : 600 W)
Result: The following indications are
displayed:
(Microwave & Hot
blast combi mode)
180 °C (Temperature)
4. Select the appropriate temperature by
turning the Multi Function Selector Dial
(Temperature : 200-40 °C).
At that time, press the Multi Function
Selector Dial to set the power level.
•If don’t set the temperature within
5 seconds, Automatically changes to the
cooking time setting stage.
(Default : 180 °C)
5. Set the cooking time by turning the Multi
Function Selector Dial.
•The maximum cooking time is
60 minutes.
MC32K7055CK_TL_DE68-04387H-00_EN.indd 93 2016-01-19 �� 4:12:56