Mini Component System Instruction Manual
Table Of Contents
- Safety Warnings
- Contents
- INSTALLING YOUR MINI-COMPACT SYSTEM
- Front Panel View
- Remote Control
- Rear Panel View
- Where to Install Your Mini-Compact System
- Connecting your System to the Power Supply
- Inserting Remote Control Batteries
- Connecting the Loudspeakers
- Connecting to an External Source
- Connecting to the Equipment
- Connecting the AM (MW/LW) Aerial
- Connecting the FM Aerial
- Connecting the SW Aerial (OPTION)
- Demo/Dimmer function
- Multi Jog Function
- Setting the Clock
- VCD/MP3-CD/CD-PLAYER
- Loading and Changing Compact Discs
- To replay the CD/MP3
- Selecting a CD in the Disc changer
- MP3-CD PLAYBACK
- Selecting a Track
- Searching for a Specific Music Passage on a CD
- Function to skip through 10 tracks at a time
- Shuffle Play Function
- Repeating One or All Tracks on the Compact Discs
- Programming the Order of Playback
- Checking or Changing Programmed Tracks
- Video CD Player Playback
- Search Functions
- Time Search Function
- When adjusting play speed
- NTSC/PAL Selection Method
- Sound Selection Function
- KEY CONTROL Function
- VCD VIEW function
- ZOOM Function
- Last Memory Function
- TUNER
- TAPE DECK
- OTHER FUNCTIONS
- RECOMMENDATIONS FOR USE
GB
9
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of
the system and are marked AM .
To avoid noise interference, check that the loudspeaker
wires do not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM (MW/LW) Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 18 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
Connecting the FM Aerial
How to connect a WIRE TYPE aerial.
Spread the SW aerial out and attach the ends to a wall, in the
position providing the best reception.
If reception is poor (e.g. distance from transmitter too great,
walls blocking the radio waves, etc.), install an outdoor aerial.
Connecting the SW Aerial (OPTION)
AUDIO OUT
RL
VIDEO
OUT
AM
AUDIO OUT
RL
VIDEO
OUT
AUDIO OUT
RL
VIDEO
OUT