Mini Component System Instruction Manual
Table Of Contents
- Safety Warnings
- Contents
- INSTALLING YOUR MINI-COMPACT SYSTEM
- Front Panel View
- Remote Control
- Rear Panel View
- Where to Install Your Mini-Compact System
- Connecting your System to the Power Supply
- Inserting Remote Control Batteries
- Connecting the Loudspeakers
- Connecting to an External Source
- Connecting to the Equipment
- Connecting the AM (MW/LW) Aerial
- Connecting the FM Aerial
- Connecting the SW Aerial (OPTION)
- Demo/Dimmer function
- Multi Jog Function
- Setting the Clock
- VCD/MP3-CD/CD-PLAYER
- Loading and Changing Compact Discs
- To replay the CD/MP3
- Selecting a CD in the Disc changer
- MP3-CD PLAYBACK
- Selecting a Track
- Searching for a Specific Music Passage on a CD
- Function to skip through 10 tracks at a time
- Shuffle Play Function
- Repeating One or All Tracks on the Compact Discs
- Programming the Order of Playback
- Checking or Changing Programmed Tracks
- Video CD Player Playback
- Search Functions
- Time Search Function
- When adjusting play speed
- NTSC/PAL Selection Method
- Sound Selection Function
- KEY CONTROL Function
- VCD VIEW function
- ZOOM Function
- Last Memory Function
- TUNER
- TAPE DECK
- OTHER FUNCTIONS
- RECOMMENDATIONS FOR USE
GB
8
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening
to other sources.
Examples
: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main.
Connect the audio cable to the rear of the mini-compact system.
Connect the... To the connector marked...
Red jack R (right)
White jack L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press Standby/On to
switch it on.
Select the AUX source by pressing AUX.
Result
: AUX is displayed.
Switch the external source on.
Adjust the volume and balance as required:
Volume Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
Connecting to an External Source
1
2
3
4
5
6
Using the Audio Cord, Connect the Audio Output Terminals (Left,
Right) of the System with the Audio Input Terminals (Left, Right) of
the Video Input Cassette Recorder, so as to Record VCD.
Using the Video Cord, Connect the Video Output Terminal of the
system with the Video Input Terminal of TV.
Turn on the TV and Select the Video mode by pressing the
TV/VIDEO SELECT button to the VIDEO Position.
Please Pay Attention not to Connect the Audio Output Terminals
(left, right) of the System with the Audio Input Terminal of TV.
Connecting to the Equipment
AMPLIFIER
AUDIO INPUT VIDEO INPUT
RL
TV
3
4