Mini Component System Instruction Manual
Table Of Contents
- Safety Warnings
- Contents
- INSTALLING YOUR MINI-COMPACT SYSTEM
- Front Panel View
- Remote Control
- Rear Panel View
- Where to Install Your Mini-Compact System
- Connecting your System to the Power Supply
- Inserting Remote Control Batteries
- Connecting the Loudspeakers
- Connecting to an External Source
- Connecting to the Equipment
- Connecting the AM (MW/LW) Aerial
- Connecting the FM Aerial
- Connecting the SW Aerial (OPTION)
- Demo/Dimmer function
- Multi Jog Function
- Setting the Clock
- VCD/MP3-CD/CD-PLAYER
- Loading and Changing Compact Discs
- To replay the CD/MP3
- Selecting a CD in the Disc changer
- MP3-CD PLAYBACK
- Selecting a Track
- Searching for a Specific Music Passage on a CD
- Function to skip through 10 tracks at a time
- Shuffle Play Function
- Repeating One or All Tracks on the Compact Discs
- Programming the Order of Playback
- Checking or Changing Programmed Tracks
- Video CD Player Playback
- Search Functions
- Time Search Function
- When adjusting play speed
- NTSC/PAL Selection Method
- Sound Selection Function
- KEY CONTROL Function
- VCD VIEW function
- ZOOM Function
- Last Memory Function
- TUNER
- TAPE DECK
- OTHER FUNCTIONS
- RECOMMENDATIONS FOR USE
GB
6
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage setting (OPTIONAL). If the voltage of the socket does
not correspond to the setting on the rear of the unit, you may
seriously damage your system.
Check the position of the Voltage selector on the rear of the system
(OPTIONAL).
Plug the main lead (marked AC Cord on the rear of the system) into
an appropriate socket.
Press the Standby/On button to switch your mini-compact system on.
To take full advantage of your new mini-compact system,
ollow these installation instructions before connecting the
unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
Where to Install Your
Mini-Compact System
Connecting your System to the
Power Supply
1
2
3
Rear Panel View
1
2
3
4
5
6
7
8
9
1. FM Aerial Connector Terminal
2. SW Aerial Connector Terminal (OPTION)
3. AM Aerial Connector Terminals
4. Main Speaker Connector Terminals
5. SUBWOOFER Speaker Connector Terminals
6. AUDIO(DISC) Output Connectors
7. VIDEO(DISC) Output Connectors
8. AUX-Input
9. Voltage Selector (OPTION)