Mini Component System Instruction Manual
Table Of Contents
- Safety Warnings
- Contents
- INSTALLING YOUR MINI-COMPACT SYSTEM
- Front Panel View
- Remote Control
- Rear Panel View
- Where to Install Your Mini-Compact System
- Connecting your System to the Power Supply
- Inserting Remote Control Batteries
- Connecting the Loudspeakers
- Connecting to an External Source
- Connecting to the Equipment
- Connecting the AM (MW/LW) Aerial
- Connecting the FM Aerial
- Connecting the SW Aerial (OPTION)
- Demo/Dimmer function
- Multi Jog Function
- Setting the Clock
- VCD/MP3-CD/CD-PLAYER
- Loading and Changing Compact Discs
- To replay the CD/MP3
- Selecting a CD in the Disc changer
- MP3-CD PLAYBACK
- Selecting a Track
- Searching for a Specific Music Passage on a CD
- Function to skip through 10 tracks at a time
- Shuffle Play Function
- Repeating One or All Tracks on the Compact Discs
- Programming the Order of Playback
- Checking or Changing Programmed Tracks
- Video CD Player Playback
- Search Functions
- Time Search Function
- When adjusting play speed
- NTSC/PAL Selection Method
- Sound Selection Function
- KEY CONTROL Function
- VCD VIEW function
- ZOOM Function
- Last Memory Function
- TUNER
- TAPE DECK
- OTHER FUNCTIONS
- RECOMMENDATIONS FOR USE
GB
21
Your mini-compact system has three cassette playback modes
which enable you to listen to both sides of a cassette
automatically.
Press Reverse Mode until the appropriate symbol is displayed.
When the display indicates... The mini-compact system plays back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
Selecting the Cassette Playback
Mode (DECK 2 only)
When playing a cassette, a counter is displayed to enable you
to take note of the counter value at the start of each track
and thus start playback at the beginning of the track to which
you wish to listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note of
the counter values at the beginning of each track, reset the counter
by pressing Counter Reset.
Tape Counter
You can record a radio program of your choice.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on
the recording.
Switch the system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
Select the TUNER function by pressing TUNER.
Select the radio station that you wish to record by pressing Tuning
or on the remote control or by press the / Down
or Up on the front panel.
Press REC/Pause.
Result:
“REC” is displayed in red and recording starts.
To stop recording, press .
Recording a Radio Program
1
2
3
4
5
6
You can copy a cassette from Deck 1 to Deck 2.
Two options are available:
Normal speed dubbing
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Deck 2, as it will
be erased when you start recording.
Switch your system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
Insert the tape to be copied in Deck 1.
To copy a cassette at... Press...
Normal speed Dubbing
Result: The appropriate indications are displayed and the cassette in
Deck 1 is copied to the cassette in Deck 2.
To stop dubbing, press .
Copying a Cassette (Dubbing)
1
2
3
4
5
4
5
5
3
4
1
4
6
1