Specifications

You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
If the CD function is selected, stop the player by pressing .
Load the selected CDs.
Press PROGRAM.
Result:
The following indications are displayed:
(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
Press PROGRAM to confirm your selection.
Result:
The selection is stored and is displayed.
To select other tracks, repeat Steps 4 to 6.
Press MP3-CD/CD () to listen to the track selection in the order
programmed.
To... Turn the MULTI JOG knob...
Listen to the current track again One notch to the left
Listen to the previous track Two notches to the left
Listen to the next track One notch to the right
Skip forwards or backwards one The appropriate number of
or more tracks notches to the right or to the
left
To cancel the selection, press .
Once if the compact disc player is stopped
Result:
PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the / buttons to select the required
tracks in step 5, 9.
1
2
3
4
5
6
8
9
10
Programming the Order of CD Play-
back
7
13
GB
12
GB
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD and MP3-CD. The track 10 tracks after the current
one will then be played back.
Example: If you want to select track 43 during playback of track
5, press the +10 button four times, and then press
the button three times .
5 ➝ 10 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
When MP3-CD playback is selected again after your CD
player has been stopped or turned off, this function allows
playback from the start of the track that you last listened
to.
Press the Program button while your MP3-CD is being played .
The LAST ON and LAST OFF may be repeatedly selected.
Last Memory Function
(This function is only available during playback of MP3-CD.)
+10
VOLUME
SURROUND MODE SOUND MODE
TUNING
MODE
MP3-CD / CD
MUTE
TUNING/
ALBUM
You can select “MEDLEY ON”and “MEDLEY OFF”during
playback of a CD.
Press the MEDLEY button once.
Result: “ MEDLEY ” is displayed.
The interval time between the tracks can be shorten.
Press the MEDLEY button again.
Cancel this function,return to normal playback.
Medley Play
(This function is only available during playback of a CD.)
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
To repeat... Press CD REPEAT on the Remote
control once or more times
until...
The current track indefinitely REPEAT 1 is displayed
The selected disc REPEAT 1 CD is displayed
All discs loaded REPEAT ALL CD is displayed
When you wish to stop the Repeat function, press CD REPEAT until
ALL CD or 1 CD is displayed, or press .
Repeating One or All Tracks
on the Compact Discs
1
1
2
2
REC / PAUSE TAPE 1/2
TAPE
MP3-CD / CD
COUNTER RESET
MO/ ST DEMO DIMMER
AI SLEEP SHUFFLE CD REPEAT
1,2
2
+10
4
3,6
1,10
8
5,9
5,9
5,9
MAX-T55 GB noR 1~15 2006.5.4 10:38 AM Page 12
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Samsung Manuals