Specifications

Alignment and Adjustments

Samsung Electronics 4-1

4. Alignment and Adjustments

4-1 Service Mode

4-1-1 SERVICE MODE ENTRY METHOD (General Transmitter)

1. Turn off the power to make the SET STAND-BY mode.

2. In order to enter the Service Mode, select MUTE-1-8-2-POWER.

✳ In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.

4-1-2 Initial DISPLAY State in times of SERVICE MODE Switch overs

4-1-2(A) OSD DISPLAY

4-1-2(B) BUTTONS OPERATIONS WITHIN SERVICE MODE

#Notice

1. In case of no signal in ALL MODE. entry into the FACTORY MODE cannot be made.

1. PWS364A 9. PinP Control

2. VPC3230 10. OSD Position

3. SDA9400 11. Test Position

4. SDA9280 12. Option Table

5. AD9884-Video 13. Reset

6. AD9884-DTV/PC

7. CXA2101Q-1

8. CXA2101Q-2

Release Time :

Joystick UP/DOWN

Joystick

Entire menu display

Cursor move to select items

Enable to increase and decrease the data of the selected items