User guide

Phone Basics
Section 2A. Phone Basics 25
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Press Options (right softkey) > Hard Pause or 2sec Pause.
3. Enter additional numbers.
4. Press to dial the number.
– or –
Press
Options (right softkey) > Save to save the number.
Plus (+) Code Dialing
When placing international calls, you can use Plus Code Dialing
to automatically enter the international access code for your
location (for example, 011 for international calls placed from
the United States).
To make a call using Plus Code Dialing:
1. Press and hold until you see a “+” on the display.
2. Dial a country code and phone number and press .
(The international access code will automatically be
dialed, followed by the country code and phone number.)
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use
either of the following abbreviated dialing features.
䢇 Contacts Match – Retrieve any number saved in your
Contacts by entering only the last four to six digits of the
number. Select
4-Digit Dial to retrieve the number. (See “To
activate the Contacts Match feature:” on page 44.)
䢇 Prepend/Abbreviated Dialing – Prepend the first five or six
digits (for example, the area code and prefix) to any four or
five digits you enter. Press to dial the resulting number.
(See page 44 to register a prepend number and activate the
Prepend feature.)
To place a call using Contacts Match Abbreviated Dialing:
1. Enter the last four digits of a Contacts entry’s phone
number.
2. Press Options (right softkey) > 4-Digit Dial.
3. Select the desired number and press or press Call
(left softkey) to call the displayed number.
䡲 If there is more than one matched number in your
Contacts, the Abbrev. Dial list is displayed. Select a
name and then press to place a call.)
Note
When dialing a number with a hard pause, press to
send the next set of numbers.
M320_white label.book Page 25 Wednesday, May 6, 2009 1:08 PM