User guide

Phone Basics
Section 2A. Phone Basics 23
End-of-Call Options
After you receive a call from or make a call to a phone number
that is not in your Contacts, the phone number and the
duration of the call are displayed. Press
Next > Save (right
softkey) to add the new number to your Contacts. (See “Saving
a Phone Number” below.)
After you receive a call from or make a call to a phone number
that is already in your Contacts, the entry name, phone
number, and the duration of the call are displayed. Press
Next
(right softkey) to view the Post Call options menu.
To access the end-of-call options:
䊳 Press Next (right softkey) to select either:
䡲 Call Again: to redial the last received phone number.
䡲 Send Message: to send the contact a message.
䡲 Save: to add the new number to your Contacts list.
Saving a Phone Number
The Contacts list can store a maximum of 500 phone numbers
in total, with each contact entry containing a maximum of 5
phone numbers. Each entry’s name can contain up to 20
characters. Your phone automatically sorts the Contacts
entries alphabetically. (For more information, see “Contacts”
on page 57.)
To save a number from standby mode:
1. Enter a phone number and press .
2. Select New Entry or Existing Entry and press . (If this
is your first entry, skip directly to step 3.)
3. Select a label (Mobile, Home, Office, Pager, or Others) and
press .
4. Use the keypad to enter a name and press .
䡲 Type in the first character and then press Options (right
softkey) to select the desired entry method
T9(English),
Alpha, Symbol, or Number.
– or –
Search for an existing contact name and press .
5. Press Done (left softkey) to save the entry. You are then
notified if the number was successfully added.
Note
The End-of-Call options are not displayed for calls
identified as No ID or Restricted.
M320_white label.book Page 23 Wednesday, May 6, 2009 1:08 PM