User Manual
SAFETY WARNINGS What the icons and signs in this user manual mean; Means that there is a potential risk of death or serious injury. WARNING CAUTION product. CAUTION To reduce the risk of fire, explosion, electric shock, or personal injury when using your camcorder, follow these basic safety precautions. Means hints or referential pages that may be heipfui when operating the camcorder. These warning signs are here to prevent injury to you and others. Please follow them explicitly.
MPORTANT iNFORMATiON ON USE Before using this camcorder • This camcorder records video in H.264 (MPEG4 partl0/AVC) format and in High Definition Video (HD-VIDEO) or Standard Definition Video(SD-VIDEO). • Please note that this camcorder is not compatible formats. with other digital video • Before recording important video, make a trial recording. Play back your trial recording to make sure the video and audio have been recorded properly.
Thefollowing terms areused inthismanuak Notes regardin{_ trademarks * 'Scene' refers tothepoint where youpress Record Start/Stop button tostart recording• All the trade names and registered until youpress again topause therecording. trademarks mentioned in this manual or other provided with your Samsung o Theterms 'photo' and'stillimage' areused documentation are trademarks or registered interchangeably withthesame meaning. product of their respective holders.
rT1 This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. OAUTION: TO REDUOE THE RISKOF ELEOTRIOSHOOK, This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. DO NOTREMOVEOOVER (OR BAOK). NOUSER-SERVIOEABLEPARTS INSIDE REFERSERVIOINGTO QUALIFIEDSERVIOE PERSONNEL. Warning To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
ANTENNA GROUNDING: 15.Apparatus shall notbeexposed todripping or 20.OUTDOOR splashing and noobjects filled with liquids, such CAMCORDER, be sure theantenna orcable asvases, shall beplaced ontheapparatus. system isgrounded toprovide some protectiors 16.VENTII..ATION: against voltage surges and built-up static Slots and openings inthecabinet areprovided charges, Section 810 oftheNational Electrical forventilation toensure reliable operation Code, ANSI/NFPA No.
23.OVERLOADING: 27. REPLACEMENT PARTS: Donotoverload wall outlets and extension replacement parts are required, be sure cords asthis canresult inarisk ofireorelectric When the service technician has used replacement shock. parts specified by the manufacturer and having the same characterislics as the original part. 24.OBJECTS AND LIQUIDS: Unauthorized substitutions may result in fire, Never push objects ofany kind into this electric shock or other hazards. CAMCORDER through openings asthey may 28.
rY1 USER INSTALLER CAUTION: Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by this party responsible for compliance to part 15 FCC rules. NOTE: LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, SIATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.
The safety precautions illustrated below are to prevent personal injury or material damages. Follow all instructions carefully. _ ARNING Means that there is a potential risk of serious personal injury. _ CAU'FION Means that there is a potential risk of personal injury or damage to the product Q Do not overload outlets or extension cords as th_s maj result in abnormal heat or fire. _ Prohibited action. Do not touch the product. This precaution kept. _ must be nplug from the power supply.
!_:_:_/_ :_i'_'_'_::__ ,____ _ _:_'_'__:_ ___ _ eve_se_,0o :_/_:_ _ :_:_ _ _:_ onetc0 nectt eAcadapter unless the plug can be fully inse[ted with no part of the blades exposed, Do not dispose of battery pack in a fire as it may explode, Chemicals to clean the camcorder. Do not SpraY cleaners direct!y on the camcerder.
(_) CAUTION _F__ _ @ _ DO not press the SUrfaCe Of DOnot dro# or expose the the LCD with force, or hit it with a sharp object. If you push the LCD surface, d!splay unevenness may occur: camcerder, battery pack, AC adaptor or other accessories to severe vibratio0s or impact. This may cause a malfunction or injury, Do not use the camcorder on a tripo d (not supplied) in a place where it is subject to severe vibrations or impact.
nforrn t on J Q Q Do not place the camcorder with the open LCD screen down. Do not wipe the camcorder body with benzene or thinner, The exterior coating could peel off or the case surface could deteriorate, Do not leave [he LCD screen open when not using the camcorder. Q (S) O Do not hold the camcorder by the LCD monitor when lifting it. The LCD screen could detach and the camcorder may fall. O Use Samsung-approvec accessories only.
content PREPARATION 2 5 9 Before reading this user manual Safety information Contents 13 13 Quick start guide You can record videos or photos on a memory card What's included with your camcorder Getting to know the camcorder Location of controls Identifying the screen displays Getting started Using the battery pack Checking the battery state Basic operation of the camcorder Turning your camcorder on/off Switching to the power saving mode Setting the operation modes Using the display(IEiV_CHEOK)button Us
content 45 48 49 49 50 52 53 54 Recording with ease for beginners (SMART AUTO mode) Capturing photos while playing back videos Zooming Basic Playback Changing the playback mode Playing back videos Viewing photos Viewing a slide show Zooming during playback 55 55 56 59 60 61 62 62 63 64 65 65 66 66 67 67 68 68 69 70 71 75 76 76 77 78 79 79 Advanced Recording Handling menus and Q.MENUS Menu items Q.
ADVANCED OPERATION f ............... i, i 80 80 81 82 82 83 85 86 MIC Level Digital Zoom Cont. Shot Bracket Shot Self Timer Time Lapse REC Quick view Guideline 86 86 87 88 89 89 Advance playback Play Option Story-Board Print Using/VIEW Highlight Share Mark 90 90 Cont. Capture File Info 91 91 91 92 92 93 94 94 95 System setting Date/Time Display Date Type Time Type File No.
content EDITING VIDEO 105 105 106 107 108 108 109 110 111 112 112 113 114 114 115 Editing video clips Deleting a section of a video Dividing a video Combining videos Editing the playlist Playlist Creating the playlist Arranging videos in the playlist Deleting videos from the playlist File management Protection from accidental erasure Deleting files Printing photos DPOF printing settings Direct printing with a PictBridge printer EXTERNAL CONNECTIONS 117 117 119 121 122 122 Connecting to a TV To connect
WHAT'S NCLUDED WiTH YOUR CAMCORDER Before using the camcorder, make sure none of the kems listed below are missing from your box. The contents or the shape of the accessories may vary depending on the sales region. Checking your accessories HMX--M20SN Silver , HMX--M20BN O Black Color/ Touch panel 8x(Optical), 12x(Intelli) ,, The shape is tile same for all modeb. Only the color is different. J ,, The exact appearance of each item may vary by model.
LOCATION OF CONTROLS Front/Left/Right @@ @ ! Built-in flash 2 Lens !0 Display (IrlI/iCHECK) 9 Power(y}) button 3 4 5 Recording indicator button Internal microphone Q.MENU button ! ! Smart Auto/iVIEW !2 Share button !3 PHOTO button _;_ Zoom (W/T) button !4 Zoom(W/T)lever 7 8 !5 Built-in speaker !_;_Hand strap hook Recording start/stop button LCD screen (Touch screen) Dunng a recording, be careful not to block the internal microphone button button and lens.
Rear/Bottom ! MODE button/Mode 2 (Video( _ )/Photo(_) Charging (CHG)lamp 3 4 5 Recording start/Stop HDMI jack Jack cover indicator mode) button 6 DO IN jack 7 _ (USB,Oomponent/AV)jack 8 Battery/Memory card cover switch 9 Battery/Memory card cover !0 Tripod receptacle 19
qettN IDENTiFYiNG THE SCREEN D SPLAYS The available functions vary depending on the selected operation mode. Dilf_;rent indbators appear depending on the setting values. The indicators below only appear in the Video Record mode. PRECHECK! • The On Screen display (OSD) below appears only when the camcorder ° Select the Video the MODE button. _£a_ is in Video record (_) mode.
The available functions vary depending on the selected operation mode. Diff,)rent indicators appear depending on the setting values. The indicators below only appear in the Video Play mode. PRECI-IECK! • The On Screen display (OSD) below appears only when the camcorder is in Video playback (_) ° Select the tab on the LCD screen to select the _!a_back mode _'._e 49 mode.
IDENTiFYiNG THE SCREEN D SPLAYS The available functions vary depending on the selected operation mode. Different indicators appear depending ors the setting values. The indicators below only appear in the Photo Record mode, PRECHECK! • The On Screen display (OSD) below only appears when the camcorder o Select the Photo_ m£de b_pressin£the MODE button. _,_49 is in Photo record (i_J) mode.
The available functions vary depending ontheselected operation mode. Different indicators appear depending onthesetting values. The indicators below only appear inthePhoto Play mode. PRECHECK! • The On Screen display (OSD) below appears only when the camcorder is in Video playback (_) ° Select the tab on the LCD screen to select the Playback mode _e 49 mode.
USING THE BATTERY PACK Purchase extra battery packs to allow continuous use of your camcorder. O B_serting the battery pack the battery pack i o Open the battery/memory card cover by sliding the battery/memory card cover switch towards _). 2o Insert the battery pack into the battery pack slot until it softly clicks. 2o Eject the battery pack by sliding the battery release switch towards C8}. Make sure that the SAMSUNG logo is facing up when the camcorder is placed as shown in the figure.
Charging the battery pack wit.h the AC power adaptor Power({ o }) button PRECHECK! Before startin i o Press the power({ _page 29 2. Open ack is inserted in your camcorder. _ }) button to turn off the camcorder, and then _ 29 close the LCD screen. the jack cover, 3o Insert the battery pack in the camcorder. 4o Connect the AC power adaptor to the DC IN jack on the camcorder, power adaptor into the wall outlet.
CHECKING THE BATTERY STATE You can check the charging state and remaining battery capacity. To check the charging The color of the CHG lamp indicates state the power or charging state. The color of the charging indicator shows the charging state. LED color • @ (Orange) @ (Green) O (Red / Blink) Battery capacity decreases ow_r time and through repeated use. Keep the camcorder turned off while not operating it.
BP125A Approx. 180 min. HD (1080/60i) • SD (480/601o) Approx. 85min. Approx. 90min. Approx. 140min. Approx. 170min. (Unit: minutes. Charging time: Approximate time (in min.) required to fully charge a completely exhausted battery pack. Recording/Playback time: Approximate recording time (in min.) available when you fully charge the battery pack. 'HD' stands for high definition image quality, and 'SD' stands for standard image quality.
• The recording times in the table on the previous page were measured when using the camcorder at 25°C (77°F).As the environmental temperature and conditions vary, the actual battery time may differ form the approximate times given in the table. The recording and playback time may be shorter depending on the conditions under which you use your camcorder.
TURNING YOUR CAMCORDER ON/OFF This chapter introduces you to the basic operation procedures of this camcorder, such as turning the power on/off, switching modes, and setting on-screen indicators. 1o Open the LCD screen to turn on the camcorder. Your camcorder turns on automatically when you open the LCD screen. 2o To turn off the camcorder, press the Power button for about one second. • (_}) Closing the LCD screen will not turn off the camcorder.
SWFCH NG TO THE POWER SAVING MODE If you need to use the cameorder for an extended time, the following functions enable you to prevent unnecessary energy consumption. In STBY mode: • The camcorder switches to "Quick On STBY" mode when you dose the LCD screen. _page 96 In PLayback mode (Includes the thumbnail view mode): • The camcorder switches to the sleep mode when you close the LCD screen, and then, if idle for more than 20 minutes, the camcorder turns off.
SETTING THE OPERATION MODES You can switch the operating mode in the following order each time you press the MODE button. Video mode (_) -_ Photo mode (11_1)-_ Video mode (_). • • Each time the operation mode changes, the respective mode indicator lights. Touching the Play (/i;i/) tab in the video or photo record mode switches the operation mode to the video or photo playback mode.
Checking the _emaining battery and _eco_ding capacity • When the power button. is off, press and hold the display (Irml/_OHEOK) • When the power is on, press button for about 3 second. and hold the display (DI/_CHECK) • The remaining battery time and the available recording appear for about 10 seconds according to the storage setting values.
frst trne settinqs S ETTIIIHGTIIHE TillM E ZOH E AH III)III)ATIE_]ME IIF01113 TIIHE III:IIIIIF/ST TillM E Set the date and time of your local area when you turn on this camcorder for the first time, 1o Open the LCD screen to turn on the camcorder. • Your camcorder turns on automatically when you open the LCD screen. • The Time Zone ("Home") screen appears centered on Lisbon, London (Greenwich Mean Time 00.00). You can also set your current time zone from the "Settings" menu.
frst trne se inqs SELECTING A LANGUAGE You can select the language the camcorder uses for menus and messages. The camcorder retains the turn it off. i o Touch Menu (@)--,Setting 2o Touch up (_)/down 3o Touch "Language," (_) (@) tab. tab until "Language" appears. and then touch the desired OSD language. 4o Touch the Exit (0) or Return (F_}) tab to complete the setting. • The camcorder displays the menus and messages in the language you selected.
INSERTING AND REMOVING A MEMORY CARD (NOT SUPPLIED} To insert a memory card i o Open the battery/memory card cover by sliding the battery/memory card cover switch towards _). 2o Insert the memory card into the card slot until it softly clicks. • Make sure that SD/SDHC Card logo is facing up and the camcorder is placed as shown in the figure. To eiect a memory card i o Open the battery/memory card cover by sliding the battery/memory card cover switch towards _).
SELECTING Compatible • • • • • • A SUITABLE memory MEMORY cards You can use SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards with this camcorder. We recommend you use an SDHC (Secure Digital High Capacity) card. The camcorder supports SD cards up to 2GB. We cannot guarentee normal operation with SD cards bigger than 2GB. MMC (Multi Media Card) and MMC Plus are not supported. Compatible memory card capacity: SD 1 - 2GB, SDHC 4 - 32GB Use compatible memory card brands.
• Ifyoucannot useamemory cardthathas been used withanother device, format it withyour camcorder. Note thatformatting erases allinformation onthememory card. • Amemory cardhasacertain lifespan. Ifthecardcannot record new data, you must purchase anewmemory card. • Donotbend, drop, orsubject thecard to strong impacts. Donotplace foreign substances onthe memory card terminals. Use asoftdry cloth toclean theterminals ifrequired.
for video Storage media (Capacity) 4GB 8GB Quality 1GB 2GB Super Fine Fine 5min 7min 10min 14rain 20min 28rain 40min 56min Super Fine Fine Super Fine Fine Fine 7min 10min 7min 10min 12min 14min 20min 14min 20min 23min 28min 40min 28min 40min 45min 56min 80min 56min 80min 90min Super Fine Fine 10min 13min 20min 26min 40min 52min 80min 104min Super Fine Fine Super Fine Fine 15min 19min 19min 24min 29min 37min 37min 47min 57min 73min 73min 93min 114min 146min 146min 186min Super Fine Fi
USING THE HAND STRAP Attach the strap and place your hand through the loop to prevent the camcorder from being dropped. ADJUSTING THE LCD SCREEN The wide LCD screen on your camcorder offers high quality imageviewing. i o Open the LCD screen with your finger. • The screen opens up to 90 °. 2o Rotate the LCD screen towards the lens. • You can rotate it up to 180 ° towards the lens and up to 90 ° backward.
BASIC CAMCORDER POSmON NG Use both hands while taking a vide() or picture to prevent the camcorder from shaking. Try to avoid any slight movement while shooting. Adiusting Aim the camcorder the shooting as shown 1o Hold the camcorder 2o Put your with hand through angle in the illustration. both your hands. the hand strap. 3o Make sure your footing is stable and there no danger of colliding with another person object. 4o Aim and focus as shown is or in the illustration.
RECORDING V_DEOS This camcorder supports both High Definition(HD)and Standard Definition(SD)image resolutions. Set the resolutionyou want before recording. _page 61 PRECHECK! • Open the LCD screen to turn on the camcorder. • Your camcorder turns on automaticallywhen you open the LCD screen. • Select the Video (,_) mode by pressingthe MODE button. _page 49 i o Select a subject to record. • Adjust the LCD panel to the best angle for recording.
,, If power is interrupted or an error occurs during recording, the video may not be recorded/edited. ,, Samsung is not responsible f_)rany damage caused by a failure of normal recording or playback operation because of memory card error. ,, Note that damaged data cannot be recovered. ,, Videos are compressed in the H.264 (MPEG--4.AVC) format. • Eject the battery pack when you haw_ finished recording to prevent unnecessary battery power consumption.
CAP""I""URIIII/GPHOTOS 11111 VIDEO RECORD MODE (SI"ILL SHOI"") Your camcorder can capture photos without interrupting video recording, even in STBY mode. PREOHECK! Selectthe Video (_) mode by pressing the MODE button. ",page 49 You can record photos while recording videos. 1o Press the Recording start/stop button. • The recording (®) indicator appears, and recording starts. 2o While recording the video, frame the scene you want to photograph, and then press the PHOTO button.
RECORDING PHOTOS You can take photos and store them in an SD/SDHC befere recording. memory card. Set the resolution and quality you want "-,pages 61 ~62 PRECHECK! • Open the LCD screen to turn on the camcorder. • Your camcorder turns on automatically when you open the LCD screen. • Select the Photo (_) mode by pressing the MODE button. '-,page 49 i o Select a subject to record. • Adjust the LCD panel to the best angle for recording. Use the Zoom lever or Zoom button to adjust the size of the subject.
IlltlEOOIIltlII}IIING WIIITIHEASE IIFOIIlt IIF_III_GIIINNEIIltS (SMAIII_@""III _AUTO MOIII}E_ When then you use the adjusts most SMART AUTO of its settings function, the automatically. camera This detects function the kind of scene frees you from making you want detailed to record, and adjustments, PREOHECK! Select the Video (,_) or Photo (_) mode by pressing the MODE bu_ton. ".'page 4{) i o Press the SMART AUTO button. • (_) indicator is displayed.
IntheSMART AUTO mode, your camcorder detects thesubject and selects anappropriate scene mode automatically. • Ascene icon appears according tothescene thecamcorder detects. • Ifthecamcorder does notdetecte ascene, the(_!)indicator appears, i\ \ ,, The SMART AUTO mode automatically sets the following record functions: "iSCENE," "White Balance," "Aperture," "Shutter," "EV," "3D-NR," "Super C.
CAPTURING PHOTOS WH LE PLAYING BACK V DEOS You can capture photos during video playback. PRECHECK! Touchthe Play (_) tab on the LCD screen to select the Playback mode. '-,page 49 i o Recorded videos appear in a thumbnail index view. • Touch the up (_)/down (_) tab to move to the previous/next page. 2o Touch the video clip you want. • The camcorder plays the video you selected. 3o Aim the camcorder at the scene you want to photograph, and then press the PHOTO button halfway.
This camcorder features 12x intelli - zoom in the Video (4t') mode and 8x optical zoom in the Photo (1_1) mode to make distant subjects appear closer. To zoom in Press the T (zoom) button on the LCD panel towards T (telephoto). • The distant subject is gradually magnified. or slide the zoom lever To zoom out Press the W (zoom) button on the LCD panel towards W (wide-angle). , The subject moves further away.
CHANGING o THE PLAYBACK MODE You can switch the operation mode directly into the playback thumbnail display by touching the Play ( ) tab on the LCD screen. The most recently created file is highlighted in the thumbnail view. The camcorder selects the thumbnail display options depending on the standby mode that was last used. However, you can choose the video (HD or SD) or photo thumbnail view display options by touching the HD (_--_HD),SD (_sD), or photo (_) tab on the LCD screen.
PLAYING BACK V DEOS You can preview recorded videos in a thumbnail index view. Find the video you want quickly, and playback directly. PRECHECK! Touch the Play ([...}) tab on the LCD screen to select the Playback mode. '-,page 50 io Touch "HD" or "SD°" • • • Video thumbnails corresponding to the selected video quality appear on the screen. To change the current thumbnail view, select the (_), or (@) tab on the screen. If you select the thumbnail display by date (_), you can sort videos by specific date.
Various playback operations Playback / Pause / Stop Playback and Pause alternate when you touch the Playback Touch the Return (_) tab to stop playback. (_) / Pause (_) Search playback During playback, each touch of the Reverse search (_) / Forward search (_) speed: RPS (Reverse Playback Search) rate: x2 -* x4 -* x8 -* xl 6 -* x32 -* x2 FPS (Forward Playback Search) rate: x2 -* x4 -* x8 -* xl 6 -* x32 -* x2 tab during playback.
V EW NG PHOTOS You can view recorded photos by using various playback functions. PRECHECK! Touch the Play ([_,.]) tab on the LCD screen to select the Playback mode. '-,page 49 1o Touch the Photo ([_) • • • • • tab. The thumbnail view appears. To change the current thumbnail view, select (/=D_]),or (/_]) tab on the screen. If you select the thumbnail display by date (/_0, you can sort videos by specific date. _page 49 To change the current thumbnail page, touch up (_) or down (_) tab.
V EW NG A SMDE SHOW You can view a photo slide show. PRECHECK! • This function works in Photo (_) mode only. ° Touch the Play (_q}) tab on the LCD screen to select the Playback mode. '-,page 49 i o Touch , o the Photo (_,) tab. The thumbnail view appears. To change the current thumbnail (Q) tab. page, touch up (_) or down 2o Touch the Menu (_) tab --_ "Slide Show Start" , The ([_) indicator appears.The slide show starts from the current selected photo.
ZOOMING You can magnify area of the DURING PLAYBACK an image magnified photo you've played back. Touch up (/-£ iydown (_)/Iefi (_)/dght to view. PRECHECK! • This funcSonworks only in the Photo play mode, ° Touch the Play(/;8) tab on the LCD screen to select the Playbackmode, _page 49 i o Touch the Photo (_{) tab. • The thumbnail view appears. To change the current thumbnail page, touch up (_) or down (_) tab. 2o Touch a desired photo to magnify.
HANDLING MENUS AND Q MENUS Follow the instructions below to use each of the menu items listed in this manual. This chapter uses the "Shutter," and "Focus" functions of the video record mode as examples. Using the MENU (@:_1) tab Menu(B) 1. Open the LCD screen to turn on the camcorder. o Jfyou find the LCD screen is already open and the power is turned off, press the power ({ _' }) button to turn on the camcorder. 2° Sebct the Video (_t_) or Photo (l_J) mode by pressing the MODE button. 3.
Customizing You can choose QoMENU button the Q_MENU items which menu items appear on the LCD screen. 1o Press the Q.MENU button. 2o Touch tab. the Edit (_) 3o Touch the Q.MENU new one, The quick item you want when you press menu screen to delete the appears. or replace with a 4o Touch the replace/add (_) or delete (s/s}) tab to make changes. • Press the( ) tab to save changes. • The Q,MENU screen is modified according to your changes. o You cannot use the Q.
Video (_) Photo (1_) @ @ @ @ X @ X @ @ @ @ @ @ X @ @ @ X @ X @ @ l!i_i_!_@_i_!i_i_i_i_i!i_@_!_@!_!_i}i}_i@iii_!!!ilii_l_{_l_i_!_!!_li_i!_ii X @ X @ @ @ @ X Delault value Auto ' Page 70 Off Off Multi Off Normal Off Off Off Medium Off Off Off Off Off 71 75 76 76 77 78 79 79 80 80 81 82 82 83 @ @ _i_!ii!i_@!ii!_(i_i!_!i_!_!!_i_!_!_!@_@_!_i_i_i_i_i_i!i_l_i_i_i_i!_i!_i!_i!_i_i!i!_ On (Video)/1 Sec(Photo) @ @ Off 85 86 @ : available, X : not available Playback menu items Vid
Setting menu items m Default value £ Ty £ 88 ; JAN/01/2010 12 Hr @ii @ ro! Off B BuB BBi_ B BB ; oti B! ffs ;: n B BY ; B _re: oon BBi B : ;; TV 98 92 93 Series Home n n Bot ii B; ;; 91 91 92 Brightness 18, Color 18 Off 91 94 94 On On On 95 99 99 Video Mode 5 Min 95 100 5 Min On 96 97 Mass Storage 16:9 101 102 Component : On On : fa Or] 8 8i: Page 97 On 1080i 103 101 103 100 103 34 104 104
Q_MENU _TEMS Your button camcorder provides lets you access Recording the quick menus functions that and contain start functions changing you frequently settings use. Pressing the Q.MENU directly.
Using the i-SCENE function, you carl select a setting that matches the scene you are shooting (Sports, Portrait, etc.). Based on your selection, the camcorder sets the appropriate shutter speed and aperture automatically for optimal recording. PRECHECK! Selectthe Video(_) or Photo (1_) mode by pressingthe MODEbutton."*page 49 1o Touch the Menu (_-_l)tab --_iSCENE." 2o Touch a desired submenu item.
You can select thereselution ofthevideo toberecorded. PRECI-IECK! Select Video (_') or Photo (_) mode by pressing the MODE button. '-,page 49 i o Touch the Menu (l_) tab -_"Resolution." 2o Touch a desired submenu item. 3o To exit the menu, touch the Exit (D) or Return ([_/) tab. • 1080/60p (,_): Records in the HD (1920x1080/60p) format. 1080/60i (_): Records in the HD (1920x1080/60i) format. 1080/30p (_): Records in the HD (1920x1080/30p) format.
You can select thequality ofthevideo toberecorded. PREOHECK! Select Video (_) or Photo (_11) mode by pressing the MODE button. '-*page 49 1o Touch the Menu (_) tab -_ "Quality." 2o Touch a desired submenu item. _ 3o To exit the menu, touch the Exit (Q) or Return (_) __ tab. E_ • Super Fine (_!_): Records video in super fine image quality. • Fine (1_): Records video in fine image quality. • Super Fine (_(:._):Records photos in super fine k_age qualky.
Understanding SlowMotion ex)The number offrames thecamcorder uses torecord video inonesecond: When Slow Motion issettoOff: 60frames per second When the Slow Motion function is set to [SD] 240frame/sec: 240 frames per second • When recordirlg in slow motion, the camcorder stops recording after 10seconds.
White Using Balance the White are shooting color Balance (Daylight, of the subject function, you can select Fluorescent, so the colors or Photo (_ etc.), in your Based recording a setting on your that matches selection, or photo the the light eameorder illuminating automatically look natural, PREOHECK! Select Video (_) 1o Touch the Menu (_) ) mode by pressing tab -*"White the MODE bu_ton. _page 4{) Balance." 2o Touch a desired submenu item.
ISO sensitivity is a measure of how rapidly the camcorder reacts to a light source, If _ou leave the aperture (lens opening) setting unchanged, the higher the ISO sensitivity, the brighter your images will be, PRECHECK! • This function works in Photo ( I_ ) mode only. • Select the Photo ( _ ) mode by pressing the MODE button, ,-,page 49 1o Touch the Menu (!MFgO)) tab _"ISO." 2o Touch a desired submenu 3o To exit the menu, touch • • • • • item. the Exit _) or Return ( ) tab.
The camcorder automatically sets theshutter speed depending onascene's brightness, You carl alse manually adjust theshutter speed, PRECHECK! Select the Video (_) or Photo ( I_ ) mode by pressing the MODE button. _page i o Touch the Menu (_) 49 tab -*"Shutter." 2o Touch a desired submenu item. 3o To exit the menu, touch the Exit (D) or Return (l,q) tab. * Auto: The camcorder automatically sets the appropriate shutter speed value. o Manual (z_ 1/XX): Touch decrease ( - ) or increase ( o_L .
Jfyou have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center Samsung Electronics America, inc. 1-800-SAMSUNG (726-7864) www.samsung.
