User Manual U24E850R U28E850R U32E850R The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 Icons used in this manual 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Precautions 10 11 12 14 Symbols Electricity and Safety Installation and Safety Operation 17 Correct posture to use the product 18 Checking the Contents 18 Checking the Components 19 Parts 19 21 Frontal Button Reverse Side 27 Installation 27 28 30 31 31 32 Removing th
Table Of Contents SCREEN SETUP 35 Connecting and Using a PC 35 37 37 38 39 39 Connection Using the HDMI Cable Connection Using the DP Cable Connection Using the MINI DP Cable Connecting to Headphones Connecting the Power Tidying Up the Connected Cables 40 Connecting the Product to a PC as a USB HUB 40 40 Connecting a PC to the Product Utilizing the Product as a USB HUB 42 Driver Installation 43 Setting Optimum Resolution 44 SAMSUNG MAGIC Bright 44 Configuring SAMSUNG MAGIC Bright 47 Brigh
Table Of Contents 56 Game Mode 56 Configuring Game Mode 57 Response Time 57 Configuring the Response Time 58 Picture Size 58 Changing the Picture Size 60 Screen Adjustment 60 Configuring H-Position & V-Position CONFIGURING THE PIP/ PBP SETTINGS 61 PIP/PBP 63 64 65 66 67 71 75 Configuring PIP/PBP Mode Configuring Size Configuring Position Configuring Sound Source Configuring Source Configuring Picture Size Configuring Contrast COORDINATING OSD 77 Transparency 77 Changing Transparenc
Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS 88 USB Super Charging 88 Configuring USB Super Charging 90 PC/AV Mode 90 Configuring PC/AV Mode 92 DisplayPort Ver. 92 Configuring DisplayPort Ver.
Table Of Contents APPENDIX 113 Responsibility for the Pay Service (Cost to Customers) 113 113 113 Not a product defect A Product damage caused by customer's fault Others 114 Correct Disposal 114 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 114 Extended warranty 115 Terminology INDEX Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor with a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. Otherwise, the power cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Before Using the Product Exercise caution when adjusting the product angle or stand height. ! Otherwise, children's fingers or hands may become stuck and injured. Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. Product failure or personal injure may result. When using headphones or earphones, do not turn the volume too high. Having the sound too loud may damage your hearing.
1 1.1 Preparations Checking the Contents 1.1.1 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components may differ from the images shown. Components Quick Setup Guide Warranty card (Not available in some locations) Regulatory guide (optional) User manual (optional) Power cable HDMI cable (optional) DP cable (optional) MINI DP cable (optional) USB 3.
1 1.2 Preparations Parts 1.2.1 Frontal Button The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide MENU MENU EYE SAVER SOURCE EYE SAVER SOURCE PIP/PBP PIP/PBP Icons Description Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Adjust the screen brightness, contrast and volume. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source U24E850R (DisplayPort/Mini DP/HDMI), U28E850R / U32E850R (DisplayPort/Mini DP/HDMI 1/HDMI 2).
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. U24E850R Port Description Connect the power cord for your monitor to the [POWER IN] port on the back of the product. Connect to a source device using an HDMI cable. Connects to a PC using a DP cable. Connects to a PC using a MINI DP cable.
1 Preparations Port Description Connect to a USB device. High-speed charging is possible using the [ 1] and [ 2] ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected devices. Connects to a PC using a USB cable. Compatible with a USB cable version 3.0 or lower. This port can only connect to a PC. Connect to an audio output device such as headphones.
1 Preparations U28E850R 1 1 2 2 Port Description Connect the power cord for your monitor to the [POWER IN] port on the back of the product. Connect to a source device using an HDMI cable. HDMI 1 support 3840 x 2160 @ 30 Hz HDMI 2 support 3840 x 2160 @ 60 Hz Connects to a PC using a DP cable. Connects to a PC using a MINI DP cable. Connect to a USB device. High-speed charging is possible using the [ 1] and [ 2] ports only. These ports charge devices faster than typical USB ports.
1 Preparations Port Description Connects to a PC using a USB cable. Compatible with a USB cable version 3.0 or lower. This port can only connect to a PC. Connect to an audio output device such as headphones.
1 Preparations U32E850R 1 1 2 2 Port Description Connect the power cord for your monitor to the [POWER IN] port on the back of the product. Connect to a source device using an HDMI cable. HDMI 1 support 3840 x 2160 @ 30 Hz HDMI 2 support 3840 x 2160 @ 60 Hz Connects to a PC using a DP cable. Connects to a PC using a MINI DP cable. Connect to a USB device. High-speed charging is possible using the [ 1] and [ 2] ports only. These ports charge devices faster than typical USB ports.
1 Preparations Port Description Connects to a PC using a USB cable. Compatible with a USB cable version 3.0 or lower. This port can only connect to a PC. Connect to an audio output device such as headphones. Connect to an external device.
1 1.3 Preparations Installation 1.3.1 Removing the Stand The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Unfasten the screw from the back of the product. Lift and detach the stand.
1 Preparations 1.3.2 Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit allows you to mount the product on the wall. Purchase a compatible wall-mount kit to use with the product. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket.
1 Preparations Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
1 Preparations 1.3.3 Installing a Wall-mount Kit or Desktop Stand U24E850R / U28E850R / U32E850R 1 2 A 3 4 B A Attach the wall-mount kit or desktop stand here B Wall-mount bracket (optional) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. Notes Using a screw longer than the standard length can damage the internal components of the product.
1 Preparations 1.3.4 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -5° (±2°) – 22° (-1.5° – +2°) 0 – 130 mm (±3 mm) The monitor tilt and height can be adjusted. Hold the top center of the product and adjust the height carefully. 1.3.5 Rotating the Monitor Screen You can rotate your monitor as shown below.
1 Preparations 1.3.6 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
1 1.4 Preparations "MagicRotation Auto" The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] 1 2 Insert the user manual CD provided with the product into the CD-ROM drive. Follow the instructions given on the screen to proceed with installation. After installation, the application menu language will be displayed in the language of the operating system.
1 1.5 Preparations Rotating the monitor When rotating the monitor, the rotation angle is displayed on the monitor screen. 0° 90° The on-screen display (OSD) menu items will automatically rotate when the screen rotates. MENU MENU EYE SAVER EYE SAVER SOURCE PIP/PBP SOURCE PIP/PBP [Caution] 1 If the "MagicRotation Auto" software is not installed on the monitor, contents on the screen cannot be rotated. The OSD can still rotate by 90° and display properly.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. 2.2 Check the types of ports at the back of the product you want to connect.
2 Connecting and Using a Source Device Provided ports may vary depending on the product. To display 3840 x 2160 @ 60 Hz, use an HDMI cable that supports 3840 x 2160 @ 60 Hz to connect HDMI. Make sure that the graphics card of the HDMI source supports 3840 x 2160 @ 60 Hz. When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded.
2 Connecting and Using a Source Device 2.2.2 Connection Using the DP Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DP IN 1 Connect one end of the DP cable to the [DP IN] port on the side of the product and the other end to the DP port on the PC. 2 Press [ ] to change the input source to DisplayPort. Provided ports may vary depending on the product.
2 Connecting and Using a Source Device 2.2.4 Connecting to Headphones Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. 1 Connect an audio output device such as headphones to [ ] port on the product. The sound could only be heard when you video card's ports support audio out. Provided ports may vary depending on the product.
2 Connecting and Using a Source Device 2.2.5 Connecting the Power Connecting parts may differ in different products. The exterior may differ depending on the product. To use the product, connect the power cable to a power outlet and the [POWER IN] port on the product. POWER IN The input voltage is switched automatically. 2.2.
2 2.3 Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB 2.3.1 Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. To use the product as a USB hub, connect the product to a PC using a USB cable. Connect the USB cable to [ ] on the back of the product and USB [ ] on the PC.
2 Connecting and Using a Source Device To detect and start a USB device faster, connect the device to the USB 3.0 port on the product. The read/write rate will be affected by the USB device and your PC. The product does not support media play. If you need to play a file in your USB device, please connect the product as a Hub to your PC and play the file on your PC. For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers.
2 2.4 Connecting and Using a Source Device Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 2.5 Connecting and Using a Source Device Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting.
3 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. 3.1 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is not available when Smart Eco Saving is enabled. SAMSUNG This menu is not available when MAGIC Angle is enabled. This menu is not available when Game Mode is enabled.
3 Screen Setup U28E850R Picture SAMSUNG MAGIC Bright Custom Brightness Standard Contrast Cinema Sharpness Dynamic Contrast Set to an optimum picture quality suitable for the working environment. Color SAMSUNG MAGIC Angle Off HDMI Black Level Custom: Customize the contrast and brightness as required. Standard: Obtain a picture quality suitable for editing documents or using Internet. Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
3 Screen Setup U24E850R / U32E850R Picture SAMSUNG MAGIC Bright Dynamic Brightness Standard Contrast Movie Sharpness Custom Set to an optimum picture quality suitable for the working environment. Color HDMI Black Level Eye Saver Mode Off U28E850R Picture SAMSUNG MAGIC Bright Dynamic Brightness Standard Contrast Movie Sharpness Custom Set to an optimum picture quality suitable for the working environment.
3 3.2 Screen Setup Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Smart Eco Saving is enabled. This menu is not available when Eye Saver Mode is enabled. 3.2.1 Configuring Brightness 1 Press any button on the front of the product to display the Function Key Guide.
3 3.3 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). 3.3.
3 3.4 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. Not available when PIP/PBP Mode is set to On. 3.4.1 Configuring Sharpness 1 Press any button on the front of the product to display the Function Key Guide.
3 3.5 Screen Setup Color A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. This menu is not available when Eye Saver Mode is enabled. SAMSUNG The Color Tone and Gamma menu is not available when MAGIC Angle is enabled. Not available when PIP/PBP Mode is set to On. 3.5.
3 Screen Setup Cool 2: Set the color temperature to be cooler than Cool 1. Cool 1: Set the color temperature to be cooler than Normal mode. Normal: Display the standard color tone. Warm 1: Set the color temperature to be warmer than Normal mode. Warm 2: Set the color temperature to be warmer than Warm 1. Custom: Customize the color tone.
3 3.6 Screen Setup SAMSUNG MAGIC Angle (U28E850R) SAMSUNG MAGIC Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. This menu is not available when Eye Saver Mode is enabled. Not available when PIP/PBP Mode is set to On.
3 Screen Setup Picture SAMSUNG MAGIC Bright Custom Brightness Select an angle that best suits your viewing position. 100 Group View Contrast 75 Custom Sharpness 60 Color SAMSUNG Off MAGIC Angle HDMI Black Level 4 1 1 5 5 2 3 4 5 Off ① : Select this option to view directly in front of the product. Lean Back Mode 1 ② : Select this option to view from a place slightly lower than the product.
3 3.7 Screen Setup HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. This function is only available in HDMI, HDMI 1 or HDMI 2 mode. Not available when PIP/PBP Mode is set to On. 3.7.
3 3.8 Screen Setup Eye Saver Mode Not available when PIP/PBP Mode is set to On. Set to an optimum picture quality suitable for eye relaxation. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation.
3 3.9 Screen Setup Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. This menu is not available when Eye Saver Mode is enabled. This Menu is not available when Smart Eco Saving is enabled. Not available when PIP/PBP Mode is set to On. 3.9.1 Configuring Game Mode 1 Press any button on the front of the product to display the Function Key Guide.
3 Screen Setup 3.10 Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time to Standard or Faster when you are not viewing a movie. This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PIP Mode). / / 3.10.1 Configuring the Response Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
3 Screen Setup 3.11 Picture Size Change the picture size. This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). This menu is not available when FreeSync is enabled. 3.11.1 Changing the Picture Size 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Picture and press [ ] on the product.
3 Screen Setup In AV mode U24E850R / U32E850R Picture Game Mode Off Choose the size and aspect ratio of the picture displayed on screen. Response Time Picture Size 4:3 Screen Adjustment 16:9 16:9 Screen Fit U28E850R Picture Eye Saver Mode Off Game Mode Off Choose the size and aspect ratio of the picture displayed on screen. Response Time Picture Size 4:3 Screen Adjustment 16:9 16:9 Screen Fit 4:3: Display the picture with an aspect ratio of 4:3.
3 Screen Setup 3.12 Screen Adjustment 3.12.1 Configuring H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is only available when Picture Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. 1 Press any button on the front of the product to display the Function Key Guide.
4 4.1 Configuring the PIP/PBP Settings PIP/PBP The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed on the main screen at the same time the another source device is displayed in inset windows. The PBP (Picture by Picture) function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen. Compatible with Windows7 and Windows8.
4 Configuring the PIP/PBP Settings When the PIP/PBP function is enabled, the resolution will not be able to automatically switch to the optimum resolution due to a compatibility issue between the graphics card and the Windows system. Set PIP/PBP Mode to Off. Alternatively, restart the monitor,then set the resolution to the optimum setting using the Windows interface.
4 Configuring the PIP/PBP Settings 4.1.1 Configuring PIP/PBP Mode Enable or disable the PIP/PBP function. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ Press [ ] to move to PIP/PBP Mode and press [ ] on the product. ] on the product. The following screen will appear. PIP/PBP Turn PIP/PBP Mode on or off.
4 Configuring the PIP/PBP Settings 4.1.2 Configuring Size Select the size and aspect ratio of the sub-screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Size and press [ ] on the product. ] on the product. The following screen will appear. U24E850R U28E850R / U32E850R PIP/PBP Select the size and aspect ratio of the sub-screen.
4 Configuring the PIP/PBP Settings 4.1.3 Configuring Position Select the position of the sub-screen from the available options. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ ] on the product. Press [ ] to move to Position and press [ ] on the product. The following screen will appear.
4 Configuring the PIP/PBP Settings 4.1.4 Configuring Sound Source Set which screen you want to hear the sound for. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Sound Source and press [ ] on the product. ] on the product. The following screen will appear.
4 Configuring the PIP/PBP Settings 4.1.5 Configuring Source Select the source for each screen. Due to DisplayPort and Mini DP can't be identified at the same time, if DisplayPort and Mini DP as the source at the same time ,the 'Apply' is not available. PIP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Source and press [ ] on the product.
4 Configuring the PIP/PBP Settings U28E850R / U32E850R If the function button description page appears, press [ The main screen will switch in the order DisplayPort → PIP/PBP ]. Mini DP → HDMI 1 → HDMI 2. Select the source for each screen. PIP/PBP Mode On Size Position Sound Source 4 5 DisplayPort Mini DP HDMI 1 HDMI 2 Press [ Source DisplayPort Picture Size HDMI 1 Contrast HDMI 2 ] to move to the option you want and press [ ]. The selected option will be applied.
4 Configuring the PIP/PBP Settings PBP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Source and press [ ] on the product. ] (available in PBP mode (Size )). The following screen will appear. U24E850R If the function button description page appears, press [ The main screen will switch in the order DisplayPort PIP/PBP PIP/PBP Mode ].
4 Configuring the PIP/PBP Settings U28E850R / U32E850R If the function button description page appears, press [ The main screen will switch in the order DisplayPort PIP/PBP → ]. Mini DP → HDMI 1 → HDMI 2. 6RXUFH Select the source for each screen.
4 Configuring the PIP/PBP Settings 4.1.6 Configuring Picture Size Select the image size for sub-screen. PIP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Picture Size and press [ ] on the product. ] (available in PIP mode (Size / / )). The following screen will appear. In PC mode PIP/PBP Select the image size for each screen.
4 Configuring the PIP/PBP Settings In AV mode PIP/PBP Select the image size for each screen. PIP/PBP Mode On Size Position Sound Source Source Picture Size Contrast 4:3 16:9 Screen Fit 75/75 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9. Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off.
4 Configuring the PIP/PBP Settings PBP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ ] on the product. Press [ ] to move to Picture Size and press [ ] (available in PBP mode (Size )). The following screen will appear. PIP/PBP Select the image size for each screen.
4 Configuring the PIP/PBP Settings In AV mode 3LFWXUH 6L]H $SSO\ 16:9 Wide &DQFHO 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9. Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off. 4 5 The function may not be supported depending on the ports provided with the product.
4 Configuring the PIP/PBP Settings 4.1.7 Configuring Contrast PIP Adjust the contrast level for sub-screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ ] on the product. Press [ ] to move to Contrast and press [ ] (available in PIP mode (Size / / )). The following screen will appear. PIP/PBP Adjust the contrast level for each screen.
4 Configuring the PIP/PBP Settings PBP Adjust the contrast level for each screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to PIP/PBP and press [ ] on the product. Press [ ] to move to Contrast and press [ ] (available in PBP mode (Size )). The following screen will appear. PIP/PBP Adjust the contrast level for each screen.
5 5.1 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Transparency Set the transparency for the menu windows. 5.1.1 Changing Transparency 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to OnScreen Display and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product.
5 5.2 Coordinating OSD Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.2.1 Configuring Language 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to OnScreen Display and press [ Press [ ] to move to Language and press [ ] on the product. ] on the product.
5 5.3 Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
6 6.1 Setup and Reset A detailed description of each function is provided. Refer to your product for details. FreeSync The functions available on the monitor may vary depending on the model. Refer to the actual product. FreeSync is a DisplayPort 1.2 function, so the choice of the DisplayPort Ver.1.1 in OSD, or when the access of HDMI signal, the FreeSync function is not available. Make sure to use a Samsung DP cable. DP cables not supplied by Samsung may not be compatible with the product.
6 Setup and Reset U24E850R / U32E850R System FreeSync Off Smart Eco Saving Standard Engine Off Timer Plus Ultimate Engine On USB Super Charging FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. FreeSync can be operated when you use AMD's graphic card with supporting Freesync solution. PC/AV Mode DisplayPort Ver. Source Detection 1.2 Auto Off: Disable FreeSync.
6 Setup and Reset Point the right mouse button, select the AMD Catalyst Control Center.
6 6.2 Setup and Reset Smart Eco Saving The Smart Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. This menu is not available when Eye Saver Mode is enabled. Not available when PIP/PBP Mode is set to On. 6.2.1 Configuring Smart Eco Saving 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
6 6.3 Setup and Reset Off Timer Plus You can set the product to automatically turn off. 6.3.1 Configuring Off Timer Off Timer 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to System and press [ ] on the product. Press [ ] to move to Off Timer Plus and press [ Press [ ] to move to Off Timer and press [ ] on the product.
6 Setup and Reset 6 7 Press [ ] to move to the option you want and press [ ]. The selected option will be applied. Turn Off After 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to System and press [ ] on the product.
6 Setup and Reset 6.3.2 Configuring Eco Timer Eco Timer 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to System and press [ ] on the product. Press [ ] to move to Off Timer Plus and press [ Press [ ] to move to Eco Timer and press [ ] on the product. Press [ ] to move to Eco Timer and press [ ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset Eco Off After 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to System and press [ ] on the product. Press [ ] to move to Off Timer Plus and press [ Press [ ] to move to Eco Timer and press [ Press [ ] to move to Eco Off After and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
6 6.4 Setup and Reset USB Super Charging Charge the battery of a connected source device quickly using the USB 3.0 port on the product. Super charging is available via [ 1] and [ 2 ] ports. Use these ports to charge devices faster than using a normal USB port. The charging speed may vary, depending on the connected device. Quick battery charging may not be supported and/or charging may take more time on some mobile devices.
6 Setup and Reset System Set the USB Super charging mode. FreeSync Off Smart Eco Saving Off Off Timer Plus USB Super Charging PC/AV Mode DisplayPort Ver. Source Detection USB Super Charging Set the USB Port1 charging On/Off. 1.2 Auto USB Super Charging USB1 Off USB1 USB2 On USB2 Set the USB Port2 charging On/Off. Off On 5 6 Off: Disable USB Super Charging. On: Enable the function to quickly charge a source device connected to the USB 3.0 port.
6 6.5 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to HDMI, DisplayPort, Mini DP(U24E850R) or HDMI 1, HDMI 2, DisplayPort, Mini DP(U28E850R / U32E850R)) is in power saving mode or is displaying the message Check Signal Cable, press the [ ] button to display the On Screen Display(OSD). You can select PC or AV. 6.5.
6 Setup and Reset U28E850R / U32E850R PC/AV Mode DisplayPort PC MiniDP AV Select the PC/AV mode for the DisplayPort source. PC/AV Mode Select the PC/AV mode for the MiniDP source. DisplayPort MiniDP PC HDMI 1 HDMI 1 AV HDMI 2 HDMI 2 PC/AV Mode Select the PC/AV mode for the HDMI1 source. DisplayPort PC MiniDP PC/AV Mode Select the PC/AV mode for the HDMI2 source.
6 6.6 Setup and Reset DisplayPort Ver. Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2. Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
6 6.7 Setup and Reset Source Detection You can activate Source Detection. Not available when PIP/PBP Mode is set to On. 6.7.1 Configuring Source Detection 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to System and press [ ] on the product. Press [ ] to move to Source Detection and press [ ] on the product. The following screen will appear.
6 6.8 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.8.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to System and press [ ] on the product. Press [ ] to move to Key Repeat Time and press [ ] on the product. The following screen will appear.
6 6.9 Setup and Reset Reset All Return all the settings for the product to the default factory settings. 6.9.1 Initializing Settings (Reset All) 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to System and press [ Press [ ] to move to Reset All and press [ ] on the product. ] on the product. The following screen will appear.
7 7.1 Information Menu and Others A detailed description of each function is provided. Refer to your product for details. Information View the current input source, frequency and resolution. 7.1.1 Displaying Information 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Information. The current input source, frequency and resolution will appear. The following screen will appear.
7 7.2 Information Menu and Others Configuring Brightness, Contrast and Volume from the Initial Screen Adjust the Brightness, Contrast, Volume using the [ ] buttons when the initial screen (that displays no menu screen) is displayed. Brightness SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Smart Eco Saving is enabled. This menu is not available when Eye Saver Mode is enabled.
8 8.1 Installing the Software Easy Setting Box Easy Setting Box "Easy Setting Box" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "Easy Setting Box" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "Easy Setting Box" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click Next.
8 Installing the Software 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "Easy Setting Box" from the program list and click the Add/Delete button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue Issues Solutions The power LED is off. The screen will not switch on. Check that the power cable is connected properly. (Refer to "2.2 Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.2 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
9 Troubleshooting Guide Sound issue Issues There is no sound. Solutions Check the connection of the audio device or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue Issues Solutions A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Appearance and Themes Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution.
10 Specifications 10.1 General Model Name Panel U24E850R U28E850R Size 23.5 Inches (59 cm) 28 Inches (70 cm) Display area 521.28 mm (H) x 293.22 mm (V) 620.93 mm (H) x 341.28 mm (V) 20.5 Inches (H) x 11.5 Inches (V) 24.4 Inches (H) x 13.4 Inches (V) 0.4525 mm (H) x 0.13575 mm (V) 0.16 mm (H) x 0.16 mm (V) 0.017815 Inches (H) x 0.005344 Inches (V) 0.006299 Inches (H) x 0.
10 Specifications Model Name Panel U32E850R Size 31.5 Inches (80 cm) Display area 696.96 mm (H) x 392.04 mm (V) 27.4 Inches (H) x 15.4 Inches (V) Pixel Pitch 0.1815 mm (H) x 0.0605 mm (V) 0.007146 Inches (H) x 0.002382 Inches (V) Power Supply AC 100 - 240 V ~ (+/- 10 %), 50/60 Hz ± 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 740.3 x 439.8 x 67.7 mm 29.1 x 17.3 x 2.
10 Specifications (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.2 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications U24E850R (Displayport / MINI DP / HDMI) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ VESA, 640 x 480 31.469 59.940 25.175 -/- MAC, 640 x 480 35.000 66.667 30.240 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.
10 Specifications U28E850R / U32E850R (HDMI1) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ VESA, 640 x 480 31.469 59.940 25.175 -/- MAC, 640 x 480 35.000 66.667 30.240 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.
10 Specifications U28E850R / U32E850R (HDMI2 / Displayport / MINI DP) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ VESA, 640 x 480 31.469 59.940 25.175 -/- MAC, 640 x 480 35.000 66.667 30.240 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.
10 Specifications Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz. Some resolutions listed in the table above may not be available depending on graphics card specifications.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution). E.g.
Index B K Before Connecting 35 Key Repeat Time 94 Brightness 47 L C Language 78 Checking the Contents 18 Connecting and Using a PC 35 Contrast 48 O Off Timer 84 Copyright 7 Correct Disposal 114 Correct posture to use the product 17 P Parts 19 PC/AV Mode 90 D Picture Size 58 Display Time 79 DisplayPort Ver.
Index T Terminology 115 Transparency 77 U USB Super Charging 88 Utilizing the Product as a USB HUB 40 Index 118
