Specifications

English-13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1 If the set is in standby mode, press the POWER ( ) button on the
remote control.
Result
: The message Plug & Play is displayed. It appears for a
little while, and then the
Language menu is
automatically displayed.
2 Select the appropriate Language by pressing the or button.
The available languages are listed
.
You can choose one of 2 languages.
3 Press the ENTER button to confirm your choice.
Result: The message Check antenna input. is displayed with
the
OK selected.
4 Press the ENTER button.
Result
: The following Areas are available:
Asia/W.Europe - CIS/E.Europe - China -
HongKong/UK - Australia - NZL/Indonesia -
South Africa - America
5 Select your Area by pressing the or button.
Press the
ENTER button.
Result
: The Auto Store menu is displayed with the Start
selected.
6 Press the ENTER button.
Result
: The channel search will start and end automatically.
7 Select the Hour, min or am/pm by pressing the or button.
Set the
Hour, min or am/pm by pressing the or button.
(Refer to “
Setting and Displaying the Current Time” on page 38)
8 Press the MENU button to confirm your setting.
Result
: The message Enjoy your viewing is displayed, and
then the channel which has been stored will be activated.
01-BN68-00656H-00Eng.qxd 7/15/04 10:00 AM Page 13