SyncMaster B1930HD / B2030HD / B2230HD / B2330HD / B2430HD LCD TV Monitor User Manual The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 INSTALLING THE PRODUCT Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Installing the Stand . . . .
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Correct Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual ICON NAME MEANING Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • The contents of this manual are subject to change without prior notice for performance improvement. • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice Copyright ©2010 Samsung Electronics Co., Ltd. All Rights Reserved. The copyright of this manual is reserved by Samsung Electronics, Co., Ltd. The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co., Ltd. The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.
1-2 Care and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth. • Avoid cleaning the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Avoid scratching the screen with your fingernails or a sharp object. • Avoid cleaning the product by spraying water onto it. If water enters the product, it may result in fire, electric shock or a problem with the product.
1-3 Safety Precautions Icons used for safety precautions ICON NAME MEANING Warning Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality. Caution Failing to follow the precautions marked with this sign may result in a personal injury or property damage. Meaning of Signs Do not perform. Must be followed. Do not disassemble. The power plug must be unplugged from the wall outlet. Do not touch. Must be grounded to prevent electric shock.
Caution Avoid unplugging the power plug while the product is operating. • Otherwise, it may damage the product due to electric shock. Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance. • When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord. • Otherwise, it may result in electric shock or fire. Connect the power plug to a wall outlet that can be easily reached.
Avoid installing the product where children may reach it. • • If a child touches the product, the product may fall and this may result in injury. Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in. • If rainwater enters the product, it may result in electric shock or fire. Since the front part is heavier, install the product on a flat and stable surface. Install the antenna far away from any high voltage cables.
Caution Avoid spraying cleansing agent directly onto the product. • This may result in discoloration or cracking of the exterior of the product or the panel coming off. If you can't get the product clean with just the supplied cloth, use a soft, damp cloth with a "monitor-exclusive cleansing agent" and wipe the product with it. • When cleaning the product, disconnect the power cord and clean the product with the supplied cleaning cloth.
Avoid moving the product by pulling the power cord or antenna cable. • Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable. When a gas leak occurs, do not touch the product or the power plug and ventilate immediately. • A spark may result in an explosion or fire. • During a thunder or lighting storm, do not touch the power cord or antenna cable. Avoid lifting up or moving the product by holding only the power cord or signal cable.
Keep the small accessories in a location out of the reach of children. Take care when adjusting the angle of the product or the height of the stand. • If your hand or finger is caught, you may be injured. • If the product is tilted excessively, the product may fall and this may result in injury. Avoid placing a heavy object over the product. When using headphones or earphones, do not turn the volume too high. • • Otherwise, it may result in a problem with the product or injury.
2 Installing the Product 2-1 Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product later. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items.
2-2 Installing the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the Stand Connector into the Stand Base in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. Place a soft cloth over the table to protect the product and place the product onto the cloth face down.
Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. - Caution Do not lift the product holding only the stand The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
2-3 Removing the Stand Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. Place a soft cloth over the table to protect the product and place the product face down. Hold the main body of the product with your hand as shown by the figure. Pull the stand in the direction of the arrow as shown in the figure to separate it. Turn the connecting screw at the bottom of the stand to separate it.
2-4 Attaching a Wall Mount/Desktop Stand Attaching a Wall Mount/Desktop Stand(not supplied) This product provides a stand mount of 75 mm x 75 mm (2.95 x 2.95 inches) that complies with the VESA specifications. : Wall/Desktop Stand Mount : Wall mount kit/desktop stand (not supplied) 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down. 3.
2-5 Connecting to a Computer 1. Connect the product to a PC depending on the video output supported by the PC. The connecting part may differ depending on the product model. When the graphics card provides a D-Sub output • Connect the [PC IN] port of the product to the D-Sub port of the PC with the D-Sub cable. When the graphics card provides a DVI output • Connect the [HDMI(DVI) IN] port of the product to the DVI port of the PC with the HDMI to DVI cable.
• Connect the [HDMI(DVI) IN] port of the product to the HDMI port of the PC with the HDMI cable. 2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC. 3. To use the monitor, connect the power cable to a power outlet and the [POWER] port on the monitor. (The input voltage is switched automatically.
• You may enjoy clear and quality sound from the computer sound card using the monitor's speakers. (You don't need to install separate speakers for your computer.) • You may get a blank screen depending on the type of video card you are using if you connect the D-sub cables simultaneously to one computer.
2-6 Using it as a TV You may view television programs on the monitor if it is connected to an antenna or cable system without installing any separate TV reception hardware or software on your computer. 1. Connect the cable or TV antenna cable to the [ANT IN] port on the rear side of the monitor. • When using an indoor antenna/cable terminal: Check the antenna terminal on the wall and then connect the antenna/cable TV cable.
2-7 Connecting an HDMI cable 1. Connect the HDMI OUT port of the AV device (Blu-Ray/DVD/Cable/Satellite box) to the [HDMI(DVI) IN] terminal of the monitor using the HDMI cable. 2. Press the [SOURCE] button at the front of the monitor or on the remote control to select mode. You do not need to make a separate audio connection when connecting via HDMI.
2-8 Connecting Using an HDMI to DVI Cable 1. Connect the DVI output terminal of an external device to the [HDMI(DVI) IN] terminal of the monitor using an HDMI to DVI cable. 2. Connect the red and white plugs of an RCA to stereo (for PC) cable to the same coloured audio output terminals of the digital output device, and connect the opposite plug to the [HDMI/PC/DVI-D AUDIO IN] terminal of the product. Press the [SOURCE] button at the front of the monitor or on the remote control to select mode.
2-9 Connecting a Component cable 1. Connect the VIDEO OUT port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN / AV IN [PR, PB, Y/ VIDEO]] input ports using a component video cable [PR, PB,Y]. 2. Connect the audio port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN / AV IN [R-AUDIO-L]] port of the monitor. Press the [SOURCE] button at the front of the monitor or on the remote control to select the mode.
2-10 Connecting AV Devices 1. Connect the port of the AV device (DVD/VCR/Cable/Satellite box/Camcorder) to the [COMPONENT IN / AV IN [R-AUDIO-L]] port of the product. 2. Connect the video output terminal of the AV device and the [COMPONENT IN / AV IN [Y/VIDEO]] of the monitor using a video cable. 3. Select using the [SOURCE] button on the remote. The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.
2-11 Connecting a Scart cable 1. Connect the [EXT(RGB)] port of the monitor to the DVD Player using a SCART jack. 2. When a Scart device is connected to your monitor, the Source automatically changes to EXT. • Connect to the DVD Devices input if the device has a [EXT [RGB]] jack. • You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on.
2-12 Connecting COMMON INTERFACE To watch paid channels, the “CI or CI+ CARD” must be inserted. 1. If you don’t insert the "CI or CI+ CARD," some channels will display the message "Scrambled Signal". 2. The pairing information containing a telephone number, the "CI or CI+ CARD" ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. 3.
2-13 Connecting to an Amplifier Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the optical input of your amplifier using an optical cable. • If no sound is emitted from the monitor, you need to use an amplifier. • For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their manufacturers.
2-14 Connecting Headphones Connect your headphones to the Headphone connection terminal.
2-15 Kensington Lock A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device for more information. You must purchase the Kensington Lock separately. To lock the product, follow these steps: 1.
3 Using the Product 3-1 Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. To return to the previous step, press the Red button. 1. Press the [POWER ] button on the remote control. • You can also use the [ • The message
• If you have received a digital signal, the time will be set automatically. If not, select to set the clock. 8. The description for the connection method providing the best HD screen quality is displayed. Check the description and press the [ ] button. 9. The message is displayed. When you have finished, press the [ ] button. If you want to reset this feature... 1. Press the [MENU] button to display the menu. Press the ▲ or ▼ button to select , then press the [ 2.
3-2 Viewing the Control panel NUMBER ICON Power Indicator DESCRIPTION This light is lit when operating normally, and blinks once when your adjustments are saved. For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption. Speaker Toggles between all the available input sources.
3-3 Remote Control The performance of the remote control may be affected by a TV or other electronic device operating near the product, causing a malfunction due to interference with the frequency. SOURCE POWER Press the button to change the input signal SOURCE. Turns the product On/Off. Number Buttons Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time. Press to change the channel.
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the +and - ends of the batteries with the diagram inside the compartment. 3. Close the cover. Remove the batteries and store them in a cool, dry place if you won‘t be using the remote control for a long time.
3-4 Teletext Feature Most television stations provide written information services via Teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
Typical Tetetext page PART CONTENTS A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure TOP MENUS SUB MENUS Picture [PC / HDMI PC Timing] MagicBright MagicAngle Contrast Brightness Sharpness Eco Solution Auto Adjustment Screen Picture Options Picture Reset Picture [TV / Ext.
MENU MagicBright MagicAngle DESCRIPTION is a feature providing an optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: , , , and . Each mode has its own pre-configured brightness value. • High Brightness For watching motion pictures such as a Blu-Ray or DVD. • For working with a mixture of images such as texts and graphics.
MENU DESCRIPTION Contrast / Brightness / Sharpness You can use the on-screen menus to change the contrast and brightness according to personal preference. • Adjust the Contrast. • Adjust the Brightness. • Adjust the Sharpness. This menu is unavailable when is set to mode. Eco Solution You can choose various options of features.
MENU Picture Options DESCRIPTION • The tone of the colour can be changed. • • - - - • Available in mode only • Not available when is . - < G-Gain > - Adjusts the individual R, G, B (Red, Green, Blue) colour controls. Not available when is . • You can switch the Size.
MENU Mode DESCRIPTION You can select the type of picture which best corresponds to your viewing requirements. You can activate either , or . MagicAngle • Selects the picture for high-definition in a bright room. • Selects the picture for optimum display in a normal environment. • Selects the picture for viewing movies in a dark room. This feature allows you to see optimal screen quality according to your viewing position.
MENU Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/ R) DESCRIPTION Your product has several setting options that allow you to control the picture quality. • Adjusts the brightness of LCD back light. • Adjusts the contrast level of the picture. • Adjusts the brightness level of the picture. • Adjusts the edge definition of the picture. • Adjusts colour saturation of the picture.
MENU Advanced Settings DESCRIPTION Samsung‘s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. is available in or mode. • You can select the level on the screen to adjust the screen depth. • • - - - You can adjust the screen contrast so that the optimal contrast is provided.
MENU Picture Options DESCRIPTION • The tone of the colour can be changed. • - - - Settings can be adjusted and stored for each external device you have connected to an input of the TV. • You can switch the Size. • Automatically adjusts the picture size to the "16:9" aspect ratio. • <16:9> Adjusts the picture size to 16:9 appropriate for DVD or wide broadcasting. • Magnify the size of the picture more than 4:3.
MENU Picture Options DESCRIPTION • If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. • Reduces MPEG noise to provide improved picture quality.
MENU Mode DESCRIPTION • Choose Standard for the standard factory settings. • Choose Music when watching music videos or concerts. • Choose Movie when viewing movies. • Emphasizes voice over other sounds. • Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. Press the [TOOLS] button to display the Tools menu. You can also set the by selecting → .
MENU Audio Description DESCRIPTION This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume. •
Selecting the Sound Mode When you set to the current sound mode is displayed on the screen. A2 Stereo NICAM Stereo Audio Type Dual I / II DEFAULT Mono MONO Automatic change Stereo STEREO Dual DUAL I Mono Stereo Dual MONO DUAL I DUAL II MONO MONO Automatic change Automatic change STEREO Automatic change DUAL I DUAL I MONO DUAL II • If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
MENU Auto Store DESCRIPTION You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the function, the PIN input window appears. • Antenna Source Select the antenna source to memorise. • • Channel Source Select the channel source to memorise.
MENU Manual Store DESCRIPTION You can scan the frequency ranges available on your television in your area and store all the channels found manually. If a channel is locked using the function, the PIN input window appears. • When scanning has finished, channels are updated in the channel list.
MENU Guide DESCRIPTION The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status. • Red (View Mode) View the list of programmes that are playing now or coming up.
MENU Channel Manager DESCRIPTION Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the , or screen. • Shows the channel list according to channel type. • Shows the group of the channel. • Shows all the currently reserved programmes Using the colour buttons with the Channel Manager. • Red (Antenna) Toggle among or .
MENU Channel List Transfer Fine Tune DESCRIPTION Imports or exports the channel map. You should connect a USB storage to use this function. • The PIN number input screen appears. Enter your 4 digit PIN number. • The default PIN number of a new TV set is 0-0-0-0. • : Import channel list from USB. • : Export channel list to USB. Use fine tuning to manually adjust a particular channel for optimal reception.
MENU DESCRIPTION Plug & Play This brings up the menu items that appeared when you first plugged in the TV. Time • Setting the clock is necessary in order to use the various timer features of the TV. • You can set up the current time manually or automatically. • • • - • Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.
MENU DESCRIPTION • Three different on / off timer settings can be made. You must set the clock first. • / Set the , and . (To activate the timer with the setting you’ve chosen, set to .) • Set the desired volume level. • Select TV or USB content to be played when the TV is turned on automatically.
MENU Language DESCRIPTION •
MENU DESCRIPTION Security • • Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. • The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting from the menu. This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video and audio. • - Available only when the source is set to .
MENU General DESCRIPTION • Conserve power by turning the monitor off when the PC is not used for a specified period. • - Available in Mode Only • When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game menu. • - • Restrictions on game mode (Caution) • • • If is : • mode is automatically changed to and cannot be changed.
MENU PIP DESCRIPTION You can use the PIP feature to simultaneously watch the TV tuner and one extemal video source. This product has one built-in tuner, which does not allow PIP to function in the same mode. • PIP Settings. • If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear. • You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
MENU Source List DESCRIPTION Use to select , or an external input source connected to the Monitor.Use to select the screen of your choice. You can use the [SOURCE] button on the remote control. • → → → → → → and cannot be connected at the same time. Edit Name Name the input device connected to the input jacks to make your input source selection easier.
Support MENU Self Diagnosis DESCRIPTION • • • If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists. • If the test pattern does not appear or there is noise in the test pattern, select . There may be a problem with the TV. Contact Samsung‘s call centre for assistance. • If the test pattern is properly displayed, select . There may be a problem with your external equipment.
MENU Software Upgrade DESCRIPTION • Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV. Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete (the new version will have a higher number than the older version).
3-6 Media Play Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your pc. MENU[ ] → Application → Media Play → [ ] Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie files to the [USB] jack on the back of the TV. 3. When USB is connected to the TV, a popup window appears. Then you can select . It might not work properly with unlicenced multimedia files.
• If the files are sorted by Basic View, up to 1000 files can be displayed in each folder. • MP3 files with DRM that have been downloaded from a non-free site cannot be played.
NUMBER MENU DESCRIPTION Operation Buttons • Red (Change Device) Selects a connected device. • Green (Preference) Sets the file preference. (not supported in Basic view) • Yellow (Select) Selects multiple files from file list. Selected files are marked with a symbol. • Blue (Sorting) Selects the sort list. • (Tools) Displays the option menu. Using the [ ] (REW) or [ previous page.
• NAME FILE EXTENSION FORMAT SubViewer .sub string-based Micro DVD .sub or .txt string-based Supported Video Formats FILE EXTENSION CONTAINER VIDEO CODEC *.avi AVI Divx 3.11 / *.mkv MKV 4.x / 5.1 / 6.0 RESOLUTION 1920 x 1080 FRAME RATE (FPS) 6 ~ 30 BIT RATE (MBPS) AUDIO CODEC 8 MP3 XviD 1920 x 1080 6 ~ 30 8 AC3 H.264 BP / 1920 x 1080 6 ~ 30 25 LPCM ADPCM MP / HP MPEG4 SP / 1920 x 1080 6 ~ 30 8 1920 x 1080 6 ~ 30 8 DTS Core ASP Divx 3.11 / 4.x / 5.1 / 6.0 *.
FILE EXTENSION CONTAINER *.ts *.tp TS *.trp VIDEO CODEC RESOLUTION FRAME RATE (FPS) BIT RATE (MBPS) AUDIO CODEC MPEG2 1920 x 1080 24 / 25 / 30 30 AC3 H.264 1920 x 1080 6 ~ 30 25 AAC VC1 1920 x 1080 6 ~ 30 25 MP3 DD+ HE-AAC Other Restrictions • If there are problems with the contents of a codec, the codec will not be supported. • If the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly.
Music Playing Music 1. Press the or 2. Press the 3. Press the [ button to select , then press the [ ] button in the menu. button to select the desired file in the file list. ] button or [ ] (Play) button. • During playing the music, you can search using the • [ ] (REW) and [ and button. ] (FF) buttons do not function during play. • Only displays the files with MP3 and PCM file extension.
• The cannot be changed until the BGM has finished loading. Playing the Multiple Files Playing the selected video/music/photo files 1. Press the Yellow button in the file list to select the desired file. 2. Repeat the above operation to select multiple files. • The • To cancel a selection, press the Yellow button again. mark appears to the left of the selected files. • To deselect all selected files, press the TOOLS button and select Deselect All. 3.
CATEGORY OPERATIONS Artist It sorts the music file by artist in alphabetical. Album It sorts the music file by album in alphabetical order. Genre It sorts music files by the genre. Mood It sorts music files by the mood. You can change the music mood information. Monthly It sorts and shows photo files by month. It sorts only by month (from January to December) regardless of year. VIDEOS MUSIC PHOTOS Videos / Music / Photos Play Option menu During playing a file, press the TOOLS button.
Settings Using the Settings Menu MENU Cont. movie play help DESCRIPTION Select to display the help pop-up message for continuous movie playback. • Get the DivX® VOD registration code - Shows the registration code authorized for the TV. If you connect to the DivX web site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD registration using , the registration is completed.
3-7 Anynet+ (HDMI-CEC) What is ? is a function that enables you to control all connected Samsung devices that support with your Samsung TV‘s remote. The system can be used only with Samsung devices that have the feature. To be sure your Samsung device has this feature, check if there is an logo on it. Connecting Anynet+ Devices 1.
MENU DESCRIPTION View TV Changes mode to TV broadcast mode. Device List Shows the Anynet+ device list. Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that support the recording function.) (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) INFO Shows the play menu of the connected device. E.g.
MENU Device List DESCRIPTION 1. Press the [TOOLS] button. Press the [ 2. Press the or ] button to select . button to select , then press the [ ] button. - devices connected to the TV are listed. - If you cannot find a device you want, press the red button to scan for devices. 3. Press the or selected device. button to select a particular device and press the [ ] button.
3-8 Installing the Device Driver If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics website (www.samsung.com), and download the driver. 1. Insert the driver installation CD into the CD-ROM drive. 2. Click on Windows Driver. 3.
3-9 Standard Signal Mode Table An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel, unlike a CDT monitor. Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product.
RESOLUTION HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) CLOCK FREQUENCY (MHZ) POLARITY (H/V) VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.
3-9-3. B2230HD / B2330HD / B2430HD RESOLUTION HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) CLOCK FREQUENCY (MHZ) POLARITY (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.
4 Installing the Software 4-1 Natural Color What is Natural Color ? This software is for Samsung products only and enables you to adjust the displayed colours on the product so they more closely match the colours of printed pictures. For more information, refer to the online help of the software (F1). Natural Color is provided online. You can download it from the website below and install; http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.
4-2 MultiScreen What is MultiScreen ? MultiScreen enables you to partition multiple sections on the Monitor. Installing the Software 1. Insert the installation CD into the CD-ROM drive. 2. Select the MultiScreen setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the MultiScreen setup file on the CD-ROM. 3. When the Installation Wizard appears, click [Next]. 4.
5 Troubleshooting 5-1 Monitor Self-Diagnosis • You can check if the product is working properly using the Self-Diagnosis function. • If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below. 1. Turn the product and the PC off. 2. Remove the D-Sub cable from the product. 3. Turn the product on. 4. If the product is working properly, the message appears.
5-2 Before Requesting Service Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Centre. PROBLEMS RELATED TO INSTALLATION (PC MODE) The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely connected and tightened. (Refer to Connecting to a Computer) PROBLEMS RELATED TO SCREEN Screen is blank and power indicator is off.
PROBLEMS RELATED TO REMOTE CONTROL The remote control buttons do not respond. Check the battery polarities (+/-). Check if the batteries have been exhausted. Check if the power is on. Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity NOTE ON THE PRODUCT APPEARANCE You may see small particles if you look closely at the edge of the bezel surrounding the screen. Troubleshooting This is part of the product's design and is not a defect.
5-3 FAQ FAQ How can I change the frequency of the video signal? PLEASE TRY THE FOLLOWING! You have to change the frequency of the graphics card. Windows XP : Change the frequency by selecting Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and then change the refresh rate under Monitor Settings. Windows ME/2000 : Change the frequency by selecting Control Panel → Display → Settings → Advanced → Monitor, and then change the refresh rate under Monitor Settings.
FAQ PLEASE TRY THE FOLLOWING! Can I watch digital TV broadcasting with an analogue TV? No. Can I use my present antenna to receive digital broadcasting? As for existing analogue TV, digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas. The analogue TV cannot interpret digital signals. Therefore, a digital TV is required to watch digital TV broadcasting.
6 More Information 6-1 Specifications 6-1-1. B1930HD / B2030HD MODEL NAME LCD Panel Synchronization B2030HD Screen Size 18.5 inches (47 cm) 20 inches (50 cm) Display Area 409.8 mm (H) x 230.4 mm (V) 442.8 mm (H) X 249.075 mm (V) Pixel Pitch 0.3 mm (H) x 0.3 mm (V) 0.2768 mm (H) x 0.2768 mm (V) Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 Hz Colour Resolution B1930HD 16.
6-1-2. B2230HD / B2330HD / B2430HD MODEL NAME LCD Panel Synchronization B2330HD B2430HD Screen Size 21.53 inches (54 cm) 23 inches (58 cm) 24 inches (61 cm) Display Area 476.64 mm (H) x 268.11 mm (V) 509.76 mm (H) X 286.74 mm (V) 531.36 mm (H) X 298.89 mm (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.2655 mm (H) x 0.2655 mm (V) 0.27675 mm (H) x 0.27675 mm (V) Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 Hz Colour Resolution B2230HD 16.
6-2 Power Saving Function This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a different Colour to indicate that the product is in power saving mode. When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse.
6-3 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. EUROPE AUSTRIA 0810 - SAMSUNG(7267864,€ 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.
CIS KAZAKHSTAN 8-10-800-500-55-500 KYRGYZSTAN 00-800-500-55-500 MOLDOVA 00-800-500-55-500 RUSSIA 8-800-555-55-55 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com http://www.samsung.com/ua_ru UZBEKISTAN 6-3 8-10-800-500-55-500 http://www.samsung.
6-4 Correct Disposal CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
