User Manual

Light Effect
You can turn on/off the LED on the front of monitor according to the situation. use it for saving power
or when the LED dazzles your eyes.
• Off - LED will not come on.
• In Standby - Turns the LED on in standby mode.
• In Watching TV - Turns the LED on while watching TV.
• Always - LED is always on.
MENU →
, → → , → → , → → MENU,EXIT
Light Level
Use to adjust the light level i.e., the brightness of the light.
MENU → , → → , → → , → → MENU,EXIT
Energy Saving
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching
TV at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power
consumption.
• Off - Turns off the energy saving function.
• Low - Sets the TV to low energy saving mode.
• Medium - Sets the TV to medium energy saving mode.
• High - Sets the TV to high energy saving mode.
MENU →
, → → , → → , → → MENU,EXIT
HDMI Black Level
When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the
screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending
on the external device connected. In this case, adjust the screen quality of your TV by configuring the
HDMI black level. This function is active only when the an external device (DVD player, STB etc.)
is connected to the TV via HDMI(RGB Signal).
(Available in HDMI Mode Only)
• Normal / Low
MENU →
, → → , → → , → → MENU,EXIT
Input
Available Modes
PC / DVI TV DTV Ext.
Component HDMI
Adjusting the Display