User Manual

• R / G / B
Adjusts the individual R, G, B color controls.
MENU →
→ , → → , → → , , , → MENU,EXIT
• Size
You can switch the Size.
• 16:9 / 4:3
MENU →
→ , → → , → → , → MENU,EXIT
Reset
Picture parameters are replaced with the factory default values.
• OK / Cancel
MENU →
→ , → → , → → MENU,EXIT
Picture : TV / DTV / Ext. / Component / HDMI
Mode
The Monitor has three automatic picture settings ("Dynamic", "Standard", and "Movie") that are
preset at the factory.
You can activate either Dynamic, Standard, or Movie.
The direct button on the remote control is 'P.MODE' button.
• Dynamic - Selects the picture for high-definition in a bright room.
• Standard - Selects the picture for the optimum display in a normal environment.
• Movie - Selects the picture for viewing movies in a dark room.
MENU →
→ → , → → MENU,EXIT
Contrast / Brightness / Sharpness / Colour / Tint
You can use the on-screen menus to change the contrast and brightness according to personal prefer-
ence.
• Contrast - Adjust the Contrast.
• Brightness - Adjust the Brightness.
• Sharpness - Adjust the Sharpness.
• Colour - Adjust the Colour.
• Tint - Adds a natural tone to the display. (It is activated when the signal is NTSC.)
MENU →
→ , → → , , , → → MENU,EXIT
Colour Tone
The tone of the colour can be changed.
Adjusting the Display