User manual SyncMaster S23A700D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. Microsoft, Windows are registered trademarks of Microsoft Corporation.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor with a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. A rise in the internal temperature may cause a fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 10 cm 10 cm 10 cm 10 cm 10 cm Precautions for Storage High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby.
Before Using the Product Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result. Insert the power plug all the way in so it is not loose. An unstable connection may cause a fire.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. Otherwise, the power cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. Adjust the angle so light does not reflect on the screen. Keep your forearms perpendicular to your upper arms and level with the back of your hands. Keep your elbows at about a right angle.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS 3D 2 Copyright 2 2 Icons used in this manual Symbols for safety precautions 3 Cleaning 3 4 4 Cleaning Securing the Installation Space Precautions for Storage 4 Safety Precautions 4 6 8 Electricity and Safety Installation Operation 12 Correct posture to use the product 18 Checking the Contents 18 19 Removing the Packaging Checking the Components 20 Attaching the Stand 22 Parts 22 25 26 26 27 Frontal Buttons Reverse Side Tidyin
Table Of Contents CONNECTING AND USING A SOURCE DEVICE SCREEN SETUP CONFIGURING TINT 33 Precautions when Viewing 3D Video 34 Before Connecting 34 Pre-connection Checkpoints 35 Connecting the Power 36 Connecting and Using a PC 36 38 38 Connecting to a PC Driver Installation Changing the Resolution Using a PC 40 Connecting to a Video Device 40 Connection Using an HDMI Cable 42 Setting Optimum Resolution 42 Connecting Headphones 43 MAGIC 43 44 45 SAMSUNG MAGIC Angle SAMSUNG MAGIC Bri
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 51 Green 51 Configuring Green 52 Blue 52 Configuring Blue 53 Color Tone 53 Configuring the Color Tone Settings 54 Gamma 54 Configuring Gamma 55 Size 55 Changing the Picture Size 56 Horizontal Position 56 Configuring H-Position 56 Vertical Position 56 Configuring V-Position 57 Menu H-Position 57 Configuring Menu H-Position 58 Menu V-Position 58 Configuring Menu V-Position 59 Eco Saving 59 Menu Transp
Table Of Contents INFORMATION MENU AND OTHERS TROUBLESHOOTING GUIDE SPECIFICATIONS 62 Display Time 62 Configuring Display Time 63 Key Repeat Time 63 Configuring Key Repeat Time 64 Customized Key 64 Configuring Customized Key 64 Off Timer On/Off 64 Configuring Off Timer On/Off 65 Off Timer Setting 65 Configuring Off Timer Setting 66 Reset 66 Initializing Settings (Reset) 67 INFORMATION 67 Displaying INFORMATION 67 Configuring Brightness in the Startup Screen 68 Configuring
Table Of Contents APPENDIX 79 Contact SAMSUNG WORLDWIDE 84 Correct Disposal 84 84 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Correct disposal of batteries in this product 85 Terminology INDEX Table Of Contents 17
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the components and remove the styrofoam and plastic bag. 4 The appearance of actual components may differ from the image shown. This image is for reference only. Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown.
1 1.2 Preparations Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the Stand Connector into the Stand in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
1 Preparations Caution Avoid lifting the product holding only the stand.
1 1.3 Preparations Parts 1.3.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. OSD Guide This is a touch-type button. Tap the button lightly with a finger. If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the menu for the pressed button appears. To go to the menu, press the button on the front of the monitor again.
1 Preparations Icons Description Open or close the onscreen display (OSD) menu, or return to the last menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. To lock the OSD control, press the [ MENU ] button for five seconds. MENU To unlock the locked OSD control, press the [ MENU ] button for more than five seconds.
1 Preparations Icons Description When the OSD guide is displayed, the [ window. ] button opens the 3D setting Turn the screen on or off. The power indicator will be lit when the product is operating normally. Refer to "10.2 PowerSaver" for details about the power-saving function. To reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time.
1 Preparations 1.3.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DC 14V Port DVI IN HDMI IN Description Connects to the DC power adapter. Connects to an audio output device such as headphones. Connects to a source device via a DVI cable. Connects to a source device using an HDMI cable.
1 Preparations 1.3.3 Tidying Up the Connected Cables Tidy up the cables using the cable holder on the back of the stand. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 1.3.4 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer.
1 Preparations 1.3.5 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 20° You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
2 3D This feature allows you to view 3D content such as 3D movies. You can view 3D content using (SyncMaster-dedicated) Samsung 3D glasses. 2.1 3D You can purchase "SyncMaster-dedicated 3D glasses (model name: SSG-M3750CR)" separately. Contact the dealer you purchased the product from for details about purchasing the 3D glasses. The product may not be compatible with 3D glasses other than the model specified above. Power off the 3D glasses if you will not be using them.
2 3D Configuring the 3D 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to 3D and press [ Press [ ] to move to 3D Mode and press [ ] on the product. ] on the product. The following screen will appear.
2 3D 4 Press [ ] to move to Depth and press [ ] on the product. The following screen will appear. 3D 3D Mode Depth : 2D→3D : L/R Change : L/R Image 5 3D→2D 5 6 Adjust the Depth using the [ ] button. The selected option will be applied. 2.1.3 L/R Change Switch the left image to the right image, and vice versa. Configuring L/R Change 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen.
2 3D Configuring 3D → 2D 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to 3D and press [ Press [ ] to move to 3D → 2D and press [ ] on the product. ] on the product. The following screen will appear. 3D 3D Mode : Frame Sequential Depth L/R Change : L/R Image 3D→2D : Off On Return 5 6 2.
2 2.4 3D Playing 3D Games on a PC First, install the SyncMaster 3D GAME Launcher (TriDef 3D) software. SyncMaster 3D Game Launcher (TriDef 3D) is a game driver that allows you to play games in 3D on a PC. 1 2 3 Set your monitor as the default monitor for the PC. Install the "SyncMaster 3D Game Launcher (TriDef 3D)" software provided on a CD. Install the software following the instructions displayed. Alternatively, download and install the software from www.tridef.com/syncmaster.
2 3D 2.5 To find 3D-compatible games, visit www.tridef.com/syncmaster. "SyncMaster 3D Game Launcher(TriDef 3D)" is updated each time new games are added to the list of compatible games. Update the software periodically at www.tridef.com/syncmaster. Precautions when Viewing 3D Video The 3D effect may be experienced differently depending on the viewer. You may not notice the 3D effect at all if you have a prescription for one eye that is very different from the other eye.
3 3.1 Connecting and Using a Source Device Before Connecting 3.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. Check the types of ports at the back of the product you want to connect.
3 3.2 Connecting and Using a Source Device Connecting the Power Connect the power adapter to [DC 14V] on the rear of the product. Connect the power cord to the adapter and wall socket. (The input voltage is switched automatically.
3 3.3 Connecting and Using a Source Device Connecting and Using a PC 3.3.1 Connecting to a PC Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the DVI Cable DVI IN 1 2 Connect the DVI cable to the DVI port on the back of the product and the DVI port on the PC.
3 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN 1 Connect the HDMI-DVI cable to the HDMI port on the back of the product and the DVI port on the PC. 2 Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC. Audio is not available if the PC and product are connected via the DVI-HDMI port.
3 Connecting and Using a Source Device 3.3.2 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers for this product. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
3 Connecting and Using a Source Device Changing the Resolution on Windows XP Go to Control Panel → Display → Settings and change the resolution. 1 2 3 Changing the Resolution on Windows Vista Go to Control Panel → Personalization → Display Settings and change the resolution.
3 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel → Display → Screen Resolution and change the resolution. 3.4 1 2 3 4 Connecting to a Video Device Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. The product can be connected to a video device. Connecting parts may differ in different products. 3.4.
3 Connecting and Using a Source Device Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to hear audio.
3 3.5 Connecting and Using a Source Device Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: 1920 x 1080 60Hz Follow the above settings to set the resolution. English Language 1 2 3.6 Press [ (;,7 Enter ] to move to the language you want and press the [ ].
4 4.1 Screen Setup Configure the screen settings such as brightness and color tone. MAGIC This feature provides the viewing angle, brightness, and tint to suit your preferences. 4.1.1 SAMSUNG MAGIC Angle Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. You can enjoy similar picture quality to when you view directly in front of the product by selecting a viewing mode appropriate for each viewing angle.
4 Screen Setup Lean Back Mode 1 ② : Select this option to view from a place slightly lower than the product. Lean Back Mode 2 ③ : Select this option to view from a place lower than Lean Back Mode 1 ② mode. 5 6 ④ : Select this option to view from a place higher than the product. Standing Mode Side Mode Group View: Select this option for more than one viewer to view from places Custom: Lean Back Mode 1 will be applied by default if Custom is selected.
4 Screen Setup Standard: Obtain a picture quality suitable for editing documents or using Internet. Game: Obtain a picture quality suitable for playing games that involve many graphic effects and dynamic movements. Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
4 Screen Setup 4 Press [ ] to move to Color and press [ ] on the product. The following screen will appear. MAGIC SAMSUNG MAGIC Angle SAMSUNG : Off MAGIC Bright : Custom SAMSUNG : Off Demo Full Intelligent MAGIC Color Return 5 6 4.2 Move Enter Off: Disable Demo: Compare normal screen mode with Full: Obtain a vivid picture quality for all areas including the flesh colors in the picture. Intelligent: Improve the chroma for all areas except the flesh colors in the picture.
4 Screen Setup 3 Press [ ] to move to Brightness and press [ ] on the product. The following screen will appear. PICTURE 3D MAGIC Brightness 50 Contrast 75 Sharpness 60 Response Time Normal HDMI Black Level Normal Return 4 4.3 Adjust Adjust the Brightness using the [ Enter ] button. Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer.
4 4.4 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. This option is not available if 3D Mode is enabled. This menu is not available when Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Color is in Full or Intelligent mode. 4.4.1 Configuring Sharpness 1 Press any button on the front of the product to display the OSD guide.
4 Screen Setup 4.5.1 Configuring Response Time 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to Response Time and press [ ] on the product. The following screen will appear. PICTURE ▶ 3D ▶ MAGIC Brightness Contrast 60 Sharpness 2200 Response Time Normal Faster Fastest HDMI Black Level Return 4 5 4.
4 Screen Setup 4 5 Press [ ] to move to the option you want and press the [ ]. The selected option will be applied. HDMI Black Level may not be compatible with some source devices.
5 Configuring Tint Adjust the tint of the screen. This option is not available when Bright is set to Cinema or Dynamic Contrast mode. 5.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This option is not available when Color is in Full or Intelligent mode. 5.1.1 Configuring Red 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen.
5 Configuring Tint 3 Press [ ] to move to Green and press [ ] on the product. The following screen will appear. COLOR Red 50 Green 50 Blue Color Tone Normal Gamma Mode1 Return 4 Adjust Enter ] button. Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This option is not available when Color is in Full or Intelligent mode. 5.3.
5 Color Tone Adjust the general color tone of the picture. This option is not available if 3D Mode is enabled. This option is not available when Angle is enabled. This menu is not available when Color is in Full or Intelligent mode. 5.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [ ] on the product.
5 Configuring Tint 4 5 Normal: Display the standard color tone. Warm: Set the color temperature to be warmer than Normal mode. Custom: Customize the color tone. Press [ ] to move to the option you want and press the [ ]. The selected option will be applied. Gamma Adjust the mid-range brightness (Gamma) of the picture. This option is not available when Angle is enabled. 5.5.1 Configuring Gamma 1 Press any button on the front of the product to display the OSD guide.
6 6.1 Resizing or Relocating the Screen Size Change the picture size. This option is not available when 3D Mode is enabled. 6.1.1 Changing the Picture Size 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SIZE&POSITION and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
6 Resizing or Relocating the Screen 5 6.2 The selected option will be applied. Horizontal Position Move the screen to the left or right. Available only when Size is set to Screen Fit. This option is not available when 3D Mode is enabled. 6.2.1 Configuring H-Position 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen.
6 Resizing or Relocating the Screen 3 Press [ ] to move to V-Position and press [ ] on the product. The following screen will appear. SIZE&POSITION Image Size Wide H-Position 50 V-Position 50 Menu H-Position 50 Menu V-Position 10 Return 4 6.4 Adjust the V-Position using the [ Adjust Enter ] button. Menu H-Position Move the menu position to the left or right. 6.4.1 Configuring Menu H-Position 1 Press any button on the front of the product to display the OSD guide.
6 6.5 Resizing or Relocating the Screen Menu V-Position Move the menu position up or down. 6.5.1 Configuring Menu V-Position 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Menu V-Position and press [ ] on the product. The following screen will appear.
7 7.1 Setup and Reset Eco Saving Adjust the power consumption of the product to save energy. The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. This option is not available if 3D Mode is enabled. Configuring Eco Saving Settings 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen.
7 Setup and Reset 3 Press [ ] to move to Menu Transparency and press [ ] on the product. The following screen will appear. SETUP&RESET ECO Saving Menu Transparency Language English PC/AV Mode PC Auto Source Manual Display Time 20 sec Key Repeat Time Acceleration Return 4 5 7.3 Press [ Off On Move Enter ] to move to the option you want and press the [ ]. The selected option will be applied. Language Set the menu language.
7 7.4 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. 7.4.1 Configuring PC/AV Mode 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to PC/AV Mode and press [ ] on the product. ] on the product. The following screen will appear.
7 7.5 Setup and Reset Auto Source Activate Auto Source. 7.5.1 Configuring Auto Source 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Auto Source and press [ ] on the product. ] on the product. The following screen will appear.
7 Setup and Reset 3 Press [ ] to move to Display Time and press [ ] on the product. The following screen will appear. SETUP&RESET ECO Saving Menu Transparency Off Language English PC/AV Mode PC Auto Source Display Time Key Repeat Time Return 4 5 7.7 Press [ 5 sec 10 sec 20 sec 200 sec Move Enter ] to move to the option you want and press the [ ]. The selected option will be applied. Key Repeat Time Control the response rate of a button when the button is pressed. 7.7.
7 7.8 Setup and Reset Customized Key By configuring Customized Key to suit your preferences, you can change the screen settings more conveniently. 7.8.1 Configuring Customized Key 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Customized Key and press [ ] on the product. ] on the product. The following screen will appear.
7 Setup and Reset 3 Press [ ] to move to Off Timer On/Off and press [ ] on the product. The following screen will appear. SETUP&RESET Customized Key MAGIC Off Timer On/Off Off : On Off Timer Setting Reset Return 4 5 Move Enter Off: Deactivate the off timer so that the product does not power off automatically. On: Activate the off timer so that the product powers off automatically. Press [ ] to move to the option you want and press the [ ]. The selected option will be applied.
7 Setup and Reset 7.11 Reset Return all the settings for the product to the default factory settings. 7.11.1 Initializing Settings (Reset) 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear.
8 8.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 8.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR HDMI SIZE&POSITION 67.5kHz 60Hz PP 1920 x 1080 SETUP&RESET INFORMATION (;,7 Exit 8.
8 8.3 INFORMATION Menu and Others Configuring Volume in the Startup Screen Adjust the Volume by pressing the [ ] button when the OSD guide is displayed. Only available in HDMI mode. 1 Press any button on the front of the product (when no menu screen is displayed) to display the OSD guide. Next, press [ ]. The following screen will appear. Volume Exit 2 Adjust the Volume using the [ 50 (;,7 Adjust Enter ] button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 76). The images on the screen look distorted. Check the cable connection to the product (Refer to "3.3 Connecting and Using a PC") The screen is not clear. The screen is blurry.
9 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Select Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Select Control Panel → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and adjust the resolution. Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution. Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize → Display Settings and adjust the resolution.
10 Specifications 10.1 General Model Name Panel S23A700D Size 23 Inches (58cm) Display area 509.76 mm (H) x 286.74 mm (V) 20.1 inches (H) x 11.3 inches (V) Synchroni zation Horizontal Frequency 30 ~ 140 KHz Vertical Frequency DVI - 50 Hz, 60 Hz, 100 Hz, 120 Hz HDMI - 24 ~ 60 Hz Display Color 16.
10 Specifications Class B device (broadcast communications device for home use) This Class B device designed for home use is registered for EMC requirements and can be used in all regions. [Recommendation] - EU Only Hereby, Samsung Electronics, declares that this MONITOR is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The official Declaration of Conformity may be found at http://www.samsung.
10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product.
10 Specifications HDMI Normal & 3D Normal Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) 1920 x 1080 60 Hz 67.500 60.000 148.500 +/+ 640 x 480 60 Hz, 480p 31.470 59.940 25.180 -/- 720 x 480 60 Hz, 480p 31.470 59.940 27.000 -/- 720 x 576 50 Hz, 576p 31.250 50.000 27.000 -/- 1280 x 720 50 Hz, 720p 37.500 50.000 74.250 +/+ 1280 x 720 60 Hz, 720p 45.000 60.000 74.250 +/+ 1920 x 1080 50 Hz, 1080i 28.130 50.000 74.
10 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) 1920 x 1080, 1080p 24 Hz, FramePacking 54.000 24.000 148.500 +/+ 1280 x 720, 720p 50 Hz, FramePacking 75.000 50.000 148.500 +/+ 1280 x 720, 720p 60 Hz, FramePacking 90.000 60.000 148.500 +/+ 1920 x 1080, 1080i 50 Hz, SBS(Half) 28.130 50.000 74.250 +/+ 1920 x 1080, 1080i 60 Hz, SBS(Half) 33.750 60.000 74.250 +/+ 1920 x 1080, 1080p 50 Hz, SBS(Half) 56.250 50.
Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINA 0800-333-3733 http://www.samsung.com BRAZIL 0800-124-421 http://www.samsung.
Appendix EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.
Appendix EUROPE PORTUGAL 808 20-SAMSUNG (808 20 7267) http://www.samsung.com RUMANIA From landline : 08010SAMSUNG (7267864) http://www.samsung.com From landline & mobile : (+40) 21 206 01 10 SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.
Appendix CIS UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698-4698 http://www.samsung.com/hk http://www.samsung.com/ hk_en/ INDIA 1800 1100 11 http://www.samsung.
Appendix MIDDlE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG(726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080 vertical lines (vertical resolution).
Index Numerics I 3D 28 INFORMATION 67 3D Mode 28 3D→2D 30 M MAGIC 43 A Adjusting the Product Tilt 27 Anti-theft Lock 26 O OSD control lock 23 Appendix 79 Auto Source 62 P PowerSaver 75 C Precautions for Storage 4 Changing the Resolution Using a PC 38 Checking the Resolution and Frequency 69 Cleaning 3 Connecting Headphones 42 Connecting to a PC 36 Connection Using an HDMI Cable 40 Contact SAMSUNG WORLDWIDE 79 R Red 51 Removing the Packaging 18 Response Time 48 Reverse Side 25 Correct posture
Index W Wide 55 Index 88
