User Manual
Table Of Contents
- SyncMaster P2270HD / P2370HD
- Table Of Contents
- 1 Major Safety Precautions
- 2 Installing the Product
- 2-1 Package Contents
- 2-2 Installing the Stand
- 2-3 Removing the Stand
- 2-4 Attaching a Wall Mount/Desktop Stand
- 2-5 Connecting to a Computer
- 2-6 Using it as a TV
- 2-7 Connecting an HDMI cable
- 2-8 Connecting Using a DVI to HDMI Cable
- 2-9 Connecting a Component cable
- 2-10 Connecting a Scart cable
- 2-11 Connecting COMMON INTERFACE
- 2-12 Connecting to an Amplifier
- 2-13 Connecting Headphones
- 2-14 Kensington Lock
- 3 Using the Product
- 4 Installing the Software
- 5 Troubleshooting
- 6 More Information
Using the Product 3-5
Connecting Anynet+ Devices
1. Connect the [HDMI IN] jack on the TV and the HDMI OUT jack of the corresponding <Anynet+> device using an HDMI
cable.
2. Connect the [HDMI IN] jack of the home theatre and the HDMI OUT jack of the corresponding <Anynet+> device using an
HDMI cable.
Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio Input
on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theatre‘s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
[DIGITAL AUDIO OUT (OPTICAL)] jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
Connect only one Home Theatre.
You can connect an <Anynet+> device using the HDMI 1.3 cable. Some HDMI cables may not support <Anynet+>
functions.
<Anynet+> works when the AV device supporting <Anynet+> is in the Standby or On status.
<Anynet+> supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.
Setting Up Anynet+
Press the [TOOLS] button to display the Tools menu. You can also display the <Anynet+> menu by selecting <Tools> →
<Anynet+ (HDMI-CEC)>