PROCEDURES Type M 17 LIMITER ORIFICE SPUD VENT CAF) \ REGULATOR BLOCK OPEN Type M }— PLUG fizz REGULATOR BLOCK ; OPEN PLUGS 7. Remove the eak limiter (vent limiter (vent cap) from he fop of the pressure regulator 8. Ina tall regulator block open plug on op of pressure regulator and tighten moderately. & Reconnect all wires. 10. The LP gas converted dryer should have an input of 20,000 BTU with & manifold expressway of 13 in, W.OF (Water Column Pressure.
