Specifications
Table Of Contents
- Cover
- Eng
- Contents
- Connecting and Preparing Your TV
- Setting the Channels
- Setting the Picture
- Changing the Picture Standard
- Adjusting the Custom Picture
- Changing the Colour Tone
- Activating Backlight
- Configuring Detailed Settings on the Picture
- Changing the Picture Size
- Selecting the Screen Mode
- Digital NR / Active Colour / DNIe / 100Hz Motion Plus
- Resetting the Picture Settings to the Factory Defaults
- Viewing the Picture In Picture (PIP)
- Freezing the Current Picture
- Setting the Sound
- Setting the Time
- Function Description
- USING The DTV Feature
- Previewing the DTV Menu System
- Updating the Channel List Automatically
- Updating the Channel List Manually
- Editing Your Favourite Channels
- Selecting Channel List
- Displaying Programme Information
- Viewing the EPG (Electronic Programme Guide) Information
- Using the Scheduled List
- Setting the Default Guide
- Viewing All Channels and Favourite Channels
- Adjusting the Menu Transparency
- Setting up the Parental Lock
- Setting the Subtitle
- Setting the Subtitle Mode
- Selecting the Audio Format
- Selecting the Digital Text (UK only)
- Selecting the Time Zone (Spain only)
- Viewing Product Information
- Checking the Signal Information
- Upgrading the Software
- Viewing Common Interface
- Selecting the CI (Common Interface) Menu
- Resetting
- Selecting the Preferred Language (Subtitle , Audio or Teletext)
- Preference
- Using the Teletext Feature
- Setting the PC
- WISELINK
- About Anynet+
- Recommendations For Use
- WEEE
English - 57
What is Anynet
+
?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet
+
Devices
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
Connect the [HDMI 1], [HDMI
2] or [HDMI 3] jack on the TV
and the HDMI OUT jack of the
corresponding Anynet+ device
using the HDMI cable.
To connect to Home Theater
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
2.
Connect the HDMI IN jack
of the home theatre and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio
Input on the receiver.
Connect only one receiver.
You can listen to 5.1 channel sound through the home theatre’s speakers. Otherwise, you can only
listen to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of
the home theatre and the TV correctly to listen to TV sound through the home theatre. However, you
cannot listen to sound from the BD recorder that is sent to the home theatre via the TV in 5.1 channel
sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home
theatre.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support
Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
➣
➣
➣
➣
➣
➣
Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3
TV
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
TV
Anynet+ Device 1 Anynet+ Device 2
Anynet+ Device 3
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
Home Theatre
Optical Cable
BN68-01312A-00Eng.indd 57 2007-08-16 �� 5:34:32