Specifications
Table Of Contents
- Cover
- Eng
- Contents
- Connecting and Preparing Your TV
- Setting the Channels
- Setting the Picture
- Changing the Picture Standard
- Adjusting the Custom Picture
- Changing the Colour Tone
- Activating Backlight
- Configuring Detailed Settings on the Picture
- Changing the Picture Size
- Selecting the Screen Mode
- Digital NR / Active Colour / DNIe / 100Hz Motion Plus
- Resetting the Picture Settings to the Factory Defaults
- Viewing the Picture In Picture (PIP)
- Freezing the Current Picture
- Setting the Sound
- Setting the Time
- Function Description
- USING The DTV Feature
- Previewing the DTV Menu System
- Updating the Channel List Automatically
- Updating the Channel List Manually
- Editing Your Favourite Channels
- Selecting Channel List
- Displaying Programme Information
- Viewing the EPG (Electronic Programme Guide) Information
- Using the Scheduled List
- Setting the Default Guide
- Viewing All Channels and Favourite Channels
- Adjusting the Menu Transparency
- Setting up the Parental Lock
- Setting the Subtitle
- Setting the Subtitle Mode
- Selecting the Audio Format
- Selecting the Digital Text (UK only)
- Selecting the Time Zone (Spain only)
- Viewing Product Information
- Checking the Signal Information
- Upgrading the Software
- Viewing Common Interface
- Selecting the CI (Common Interface) Menu
- Resetting
- Selecting the Preferred Language (Subtitle , Audio or Teletext)
- Preference
- Using the Teletext Feature
- Setting the PC
- WISELINK
- About Anynet+
- Recommendations For Use
- WEEE
English - 48
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
1.
Preset: Press the SOURCE button to select PC mode.
2.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to select "PC", then press the ENTER/OK button.
4. Press the ENTER/OK button to select "Image Lock".
5. Press the
▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER/OK button.
6. Press the
◄
or
►
button to adjust the screen quality.
Press the ENTER/OK button.
7. Press the EXIT button to exit.
Changing the Image Position:
Adjust the PC’s screen positioning if it does not fit the TV
screen.
1.
Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Position", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the
◄
or
►
button to adjust the Horizontal-Position.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
1.
Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the ENTER/OK button.
3. Press the EXIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default
values.
1.
Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Image Reset", then press
the ENTER/OK button.
3. Press the EXIT button to exit.
TV
Image Lock
Coarse 50
Fine 0
Move Enter Return
TV
Position
Move Enter Return
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter Return
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter Return
BN68-01312A-00Eng.indd 48 2007-08-16 �� 5:34:19