Specifications
Table Of Contents
- Cover
- Eng
- Contents
- Connecting and Preparing Your TV
- Setting the Channels
- Setting the Picture
- Changing the Picture Standard
- Adjusting the Custom Picture
- Changing the Colour Tone
- Activating Backlight
- Configuring Detailed Settings on the Picture
- Changing the Picture Size
- Selecting the Screen Mode
- Digital NR / Active Colour / DNIe / 100Hz Motion Plus
- Resetting the Picture Settings to the Factory Defaults
- Viewing the Picture In Picture (PIP)
- Freezing the Current Picture
- Setting the Sound
- Setting the Time
- Function Description
- USING The DTV Feature
- Previewing the DTV Menu System
- Updating the Channel List Automatically
- Updating the Channel List Manually
- Editing Your Favourite Channels
- Selecting Channel List
- Displaying Programme Information
- Viewing the EPG (Electronic Programme Guide) Information
- Using the Scheduled List
- Setting the Default Guide
- Viewing All Channels and Favourite Channels
- Adjusting the Menu Transparency
- Setting up the Parental Lock
- Setting the Subtitle
- Setting the Subtitle Mode
- Selecting the Audio Format
- Selecting the Digital Text (UK only)
- Selecting the Time Zone (Spain only)
- Viewing Product Information
- Checking the Signal Information
- Upgrading the Software
- Viewing Common Interface
- Selecting the CI (Common Interface) Menu
- Resetting
- Selecting the Preferred Language (Subtitle , Audio or Teletext)
- Preference
- Using the Teletext Feature
- Setting the PC
- WISELINK
- About Anynet+
- Recommendations For Use
- WEEE
English - 38
You can get information about the signal status.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press
the ENTER/OK button.
2.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the
ENTER/OK button.
4. Press the ▲ or ▼ button to select "Signal Information",
then press the ENTER/OK button.
5. Press the EXIT button to exit.
If the signal status is poor, the "No signal." message is
displayed.
Checking the Signal Information
Move Enter Return
Signal Information
Service: ?
Service ID:0000
Multiplex: ? (TSID 0000, ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Return
To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast
as part of the normal Television signal.
It will automatically detect these signals and display the
software upgrade banner. You are given the option to install
the upgrade.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press
the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the
ENTER/OK button.
4. Press the ▲ or ▼ button to select "Software Upgrade",
then press the ENTER/OK button.
5.
Press the
▲ or ▼
button to select “Software Infomation”,
“Manual Upgrade” or “Satandby Mode upgrade”.
Press the ENTER/OK button.
♦ Software Inforamtion
Press the ENTER/OK button, then the current software version is shown. To display the software
version information, press the ENTER/OK button again.
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
♦
Manual Upgrade
Press the ENTER/OK button to search for new software from the currently broadcasting channels.
♦
Standby Mode Upgrade : On / Off
Press the ENTER/OK button. To continue software upgrade with master power on, Select On
by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is
automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software
upgrade is completed.
6. Press the EXIT button to exit.
Upgrading the Software
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
Software Upgrade
Software Information
Manual Upgrade
Standby Mode upgrade : On
Move Enter Return
Move Enter Return
BN68-01312A-00Eng.indd 38 2007-08-16 �� 5:34:12