Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site EIRE U.K 0818 717 100 0845 SAMSUNG (7267864) www.samsung.com/ie www.samsung.com/uk LCD TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No.
Information on Use English Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. Do not display a still image and partially still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
English Trademark & Label License Notice TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Symbol Note One-Touch Button TOOLS Button Press © 2009 Samsung Electronics Co., Ltd. All rights reserved. BN68-02315G-01Eng.
Contents English Getting Started 6 Installing the Stand 6 Disconnecting the Stand 7 Installing the Wall Mount Kit 7 Assembling the Cables 7 Anti-Theft Kensington Lock 8 Securing the Installation Space 9 Securing the TV to the Wall 10 Accessories 11 Viewing the Control Panel 12 Viewing the Connection Panel 14 Connections 15 Installing Batteries in the Remote Control 16 Viewing the Remote Control Basic Operation 17 Placing Your Television in Standby Mode 17 Plug & Play Feature 18 Viewing t
42 Connecting Anynet+ Devices 43 Setting Up Anynet+ English Anynet+ 43 Switching between Anynet+ Devices 45 Recording 45 Listening through a Receiver (Home Theatre) 46 Troubleshooting for Anynet+ Other Information 47 Teletext Feature 48 Using Your TV as a Computer (PC) Display 49 Troubleshooting: Before Contacting Service Personnel 50 Specifications Warning! Important Safety Instructions Wiring the Mains Power Supply Plug (UK Only) Warranty Card BN68-02315G-01Eng.
English Getting Started Installing the Stand Getting Started Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only. 1 Attach your LCD TV to the stand. ■ Two or more people should carry the TV. ■ Make sure to distinguish between the front and back of the stand when assembling them. ■ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.
Installi������������������ ng the ����������� Wall Mount ��� Kit English Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Securing the Installation Space English Getting Started Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. Install the product so the required distances shown in the figure are kept. ■ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
Securing the TV to the Wall Getting Started 1 English Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling: Put the screws into the clamps and firmly fasten them onto the wall.
Accessories English ■ Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Getting Started Remote Control & Batteries (AAA x 2) Power Cords User Manual Stand Screw X 4 (Depending on the model) Cover-Bottom Cleaning Cloth (M4 X L16) Holder-Wire Cable (Depending on the model) ■ The items colour and shape may vary depending on the model.
Viewing the Control Panel 11 The product colour and shape may vary depending on the model. The front panel buttons can be activated by touching it with your finger. English ■ ■ Speakers Aim the remote control towards this spot on the TV. Getting Started Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. Press to see an on-screen menu of your TV’s features. Press to increase or decrease the volume.
Viewing the Connection Panel English ■ The product colour and shape may vary depending on the model. 1 2 34 Getting Started @ 1 2 34 2 @ ! 2 ! 0 9 8 7 6 5 0 9 8 7 6 5 1 COMPONENT IN Connects Component video / audio. 2 HDMI IN 1, 2, 3(DVI), 4 / DVI AUDIO IN Connects to the HDMI jack of a device with an HDMI output. ■ No sound connection is needed for an HDMI to HDMI connection. ■ HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
EXT 1 EXT 2 Video O O Input Audio (L / R) O O RGB O X Getting Started Connector 13 English 6 H(HEADPHONE) Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled. ■ Using the sound function is restricted when connecting headphones to the TV. ■ Prolonged use of headphones at a high volume may damage your hearing. ■ You will not hear sound from the speakers when you connect headphones to the TV.
Connections English Best 14 OPTICAL (Digital) Analog Audio connection Normal Getting Started Using a Audio Cable AUDIO (Analog) Amplifier / DVD Home Theater AUDIO IN Digital Audio connection Using an Optical Cable Digital Audio System OPTICAL HD connection Using a D-Sub Using an HDMI Cable Cable HDMI OUT HD connection Using D-Sub Cable Using anaHDMI/DVI Cable AUDIO OUT DVI OUT Using Cable Using a a D-Sub D-Sub Cable AUDIO OUT BN68-02315G-01Eng.
Installing Batteries in the Remote Control 3 Replace the cover. ■ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.
Viewing the Remote Control English ■ ■ ■ You can use the remote control up to a distance of about 23 feet from the TV. The performance of the remote control may be affected by bright light. The product colour and shape may vary depending on the model. Getting Started Selects the TV mode directly. (p. 34, 47) Turns the TV on and off. Press to change the channel. Used to display Favourites channel Lists on the screen. (p. 22) Enables you to return to the previous channel you were watching.
Basic Operation 17 English Placing Your Television in Standby Mode 1 2 Press the POWERP button on the remote control. ■ The screen is turned off and a standby indicator appears on your set. To switch your set back on, simply press the POWERP button again. ■ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
English Basic Operation 1 2 3 Press the MENU button. Press the ▲ or ▼ button to select Setup, then press the ENTERE button. Setup 18 If you want to reset this feature... Plug & Play Menu Language Time Broadcast Security General Press the ENTERE button again to select Plug & Play. Enter your 4 digit PIN number. ■ The default PIN number of a ������������������������ new��������������������� TV set is ‘0-0-0-0’.
Using the Menus 19 English Viewing the Menus MENU button Display the main on-screen menu. Using the Menus Menu provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button presses. RETURN button Return to the previous menu. ENTERE / DIRECTION Buttons Move the cursor and select an item. Select the currently selected item. Confirm the setting. EXIT Exit the on-screen menu.
Channel Option English Auto Store Description ❑ Air / Cable Using the Menus Antenna source to memorize ■ Digital & Analogue: Digital and Analogue channels. ■ Digital: Digital channels. ■ Analogue: Analogue channels. When selecting Cable → Digital & Analogue or Cable → Digital: Provide a value to scan for cable channels. ■ Search Mode → Full / Network /Quick ■ Quick Network ID: Displays the network identification code. Frequency: Displays the frequency for the channel.
4 5 6 7 8 9 0 Channel Option 21 Description The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available. ❑ Now & Next Guide For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.
Channel Option English Channel List Description Using this menu, you can add / delete or set favourites channels and use the programme guide for digital broadcasts. ❑ All Channels Shows all currently available channels. Using the Menus ❑ Added Channels Shows all added channels. ❑ Favourites ■ You can select these options by simply pressing the CH LIST button on the remote control. ■ To select the favourites channels you have set up, press the FAV.CH button on the remote control.
Channel Option ❑ Edit Channel Name (analogue channels only� �����) Channels can be labelled so that their call letters appear whenever the channel is selected. ❑ Edit Channel Number (digital channels only� �����) Using the Menus You can also edit the channel number by pressing the number buttons on the remote control. ■ Only memorized channels can be reserved. ❑ Sort (analogue channels only� �����) This operation allows you to change the programme numbers of the stored channels.
Picture Menu Mode Using the Menus Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R) Advanced Settings Description Selects the type of picture settings that best correspond to your viewing preferences or requirements. Presets a higher brightness, contrast, and sharpness to the picture. ■ D������ yn���� amic Recommended for use in bright room conditions. ■ Standard Recommended for use in a normal viewing condition.
Picture Option BN68-02315G-01Eng.indd 25 ■ Advanced Settings is available in Standard or Movie mode. ■ In PC mode, you can only make changes to Gamma and White Balance from among the Advanced Settings items. ■ Colour is available when Colour Space is set to Custom. ■ In Colour, you can adjust the RGB values for the selected colour. ■ To reset the adjusted RGB value, select Reset. Using the Menus Picture Options 25 Description ■ Gamma Changes the rate at which images ramp or fade from light to dark.
Picture Option English Picture Options Using the Menus BN68-02315G-01Eng.indd 26 Description ■ Size Changes the screen shape in terms of height and width. Also known as Aspect Ratio. Auto Wide: Enables the correct picture size to match the original video signal. 16:9: Sets the picture aspect ratio to fill the screen. Wide Zoom: Enlarges the middle part of the picture. Zoom: Magnifies the picture contents horizontally and vertically.
Picture Option Picture Reset 27 ■ Blue Only Mode is available when the picture mode is set to Movie or Standard. Using the Menus Picture (In the PC mode) Option Auto Adjustment Screen BN68-02315G-01Eng.indd 27 English Picture Options Description ■ Blue Only Mode Helps to adjust the colour and tint controls when used with colour bar test patterns. Recommended for qualified picture alignment specialists only. Available only when the Picture Mode is set to Movie or Standard.
Sound Menu Mode Using the Menus Equalizer SRS TruSurround HD Audio Language Audio Format Audio Description Auto Volume Speaker Select BN68-02315G-01Eng.indd 28 Description ■ Standard: Selects the normal sound mode. ■ Music: Emphasizes music over voices. ■ Movie: Provides the best sound for movies. ■ Clear Voice: Emphasizes voice over other sounds. ■ Custom: Recalls your customized sound settings. The sound settings can be adjusted to suit your personal preferences.
Selecting the Speaker Mute Sound Output Mute Mute Sound Option Sound Reset Using the Menus TV Speaker External Speaker Video No Signal 29 English RF / AV / Component / PC / HDMI Sound Output Audio Out (Optical, L/R Out) to Sound System RF / AV / Component / PC / HDMI Sound Output TV’s Internal Speakers Sound Reset Description You can restore the Sound settings to the factory defaults. Reset Sound Mode: Current sound values return to default settings. Cancel sound reset.
Setup Menu Menu Language Time Description You can set the menu language. Plug & Play Setup English Setup Option Menu Language ❑ Clock Using the Menus Setting the clock is necessary in order to use the various timer features of the TV. If you disconnect the power cord, you have to set the clock again. ■ Clock Mode You can set up the current time manually or automatically. Auto: Set the current time automatically using the time from the digital broadcast.
Setup Option 31 Description ❑ Subtitle Using the Menus You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing-impaired person. ■ Subtitle Switches subtitles on or off. ■ Mode Sets the subtitle mode. ■ Subtitle Language Set the subtitle language.
Setup 32 Option English Broadcast Using the Menus Security Description ❑ Common Interface ■ CI Menu This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. ■ Application Info. This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF. 1. Purchase the CI CAM module by visiting your nearest dealer or by phone. 2.
Setup Option ❑ Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption. If you select Picture Off, the screen is turned off and you can only hear the sound. Press any button to get out of Picture Off. ❑ Melody A melody sound can be set to come on when the TV is powered On or Off.
Input Menu Source List Using the Menus Edit Name BN68-02315G-01Eng.indd 34 Description Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. ■ TV / Ext.1 / Ext.2 / AV / Component / PC / HDMI1 / HDMI2 / HDMI3/DVI / HDMI4 / USB You can choose only those external devices that are connected to the TV.
Support menu 35 BN68-02315G-01Eng.indd 35 Self Diagnosis ▶ Software Upgrade HD Connection Guide Contact Samsung ■ If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu. Using the Menus Software Upgrade Support Self Diagnosis Description ■ Picture Test If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists.
Support Option Description English ■ By Channel Upgrades the software using the broadcasting signal. If the function is selected during the software transmission period, this function searches for available software and downloads the software. The time required to download the software is determined by the signal status. ■ Standby Mode Upgrade To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button.
Connecting a USB Device Press the POWER button to turn the TV on. Connect a USB device containing photo and/or music files to the USB jack on the side of the TV. When the Application selection screen is displayed, press the ENTERE button to select Media Play (USB). Media Play - USB Device 1 2 3 TV Side Panel 37 English Media Play - USB Device USB Drive Photo SUM 861MB/994MBFree Photo Music Move ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Setup Enter Return MTP (Media Transfer Protocol) is not supported.
Using the Media Play Menu Media Play - USB Device Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2 Press the ▲ or ▼ button to select Media Play (USB), then press the ENTERE button. 3 Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the ENTERE button. 4 Press the ◄ or ► button to move to an icon, then press the ENTERE button.
Viewing a Slide Show 1 2 3 Press the INFO button to display the option View, Start Slide Show, Delete (or Delete Selected file), Delete All, Deselect All Slide Show Speed :Normal Background Music :On 39 Media Play - USB Device Moving to a photo may take a few seconds to load the file. At this point, the icon will appear at the top left of the screen. It takes time to show JPEG files as Thumbnail images. This menu only shows files whose file extension is jpg.
Using the Option Menu English Media Play - USB Device 1 2 3 Press the ◄ or ► button to move to Photo, then press the ENTERE button. The saved file information is displayed as a folder or file. 4 Press the INFO button to display the option (Start Slide Show, Zoom, Rotate, List) Complete Steps 1 to 3 of “Using the Media Play Menu”.(Refer to page 38) Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTERE button.
Using the Option Menu Select to play MP3 files. Repeat Music Select to repeatedly play MP3 files in the current folder. ■ You can�������� sele��� ct ������ On or ���� Off. Select the file to delete. (Alternatively, select multiple files by pressing the Yellow button.) ■ You cannot recover a deleted file. Delete / Delete All / Delete Selected File (When multiple files are selected) Deselect All (When at least one file is selected) You can deselect all files.
English Anynet+ Connecting Anynet+ Devices Anynet+ What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a TV TV Anynet+ Device 1 HDMI 1.3 Cable Anynet+ Device 2 HDMI 1.3 Cable Anynet+ Device 3 HDMI 1.
Setting Up Anynet+ Description Application Anynet+ (HDMI-CEC) Media Play (USB) Anynet+ ■ Anynet+ (HDMI-CEC) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. Whe������ n t��� he Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. ■ Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the TV is turned Off. The active source on the TV remote must be set to TV to use the Anynet+ function.
Anynet+ Menu English The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Option Description Anynet+ View TV Anynet+ mode changes to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) Menu Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) INFO Shows the play menu of the connected device. E.g.
Recording 45 3 Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE button. Recording begins. ■ When there is more than one recording device. When multiple recording devices are connected, the recording devices are listed. Press the ▲ or ▼ button to select a recording device and press the ENTERE button. Recording begins.
Troubleshooting for Anynet+ English Problem Possible Solution ● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ● Connect only one receiver (home theatre). ● Check if the Anynet+ device power cord is properly connected. ● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. ● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ● Check whether the TV remote control is in TV mode.
Other Information 47 English Teletext Feature 1 5 (reveal) Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again. 2 4 (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. 3 8 (store) Used to store the Teletext pages.
Using Your TV as a Computer (PC) Display English Setting Up Your PC Software (Based on Windows XP) Other Information The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases.
● ● ● ● Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume. Normal picture but no sound ● Check the volume. ● Check whether the MUTEM button has been pressed on the remote control. ● Check the Speaker Select settings. Screen is black and power indicator light blinks steadily ● On your computer check; Power, Signal Cable. ● The TV is using its power management system.
Specifications English Other Information Model Name LE32B550, LE32B551 LE32B553, LE32B554 LE37B550, LE37B551 LE37B553, LE37B554 Screen Size (Diagonal) 32 inch 37 inch <1W <1W 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 10W X 2 10W X 2 794 X 77 X 524 mm 794 X 240 X 570 mm 917 X 79 X 592 mm 917 X 255 X 658 mm 13 kg 16 kg Power Consumption Standby PC Resolution (Optimum) Sound (Output) Dimensions (WxDxH) Without Stand With stand Weight With Stand Environmental Considerations Operating Tempera
Warning! Important Safety Instructions Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE.
Wiring the Mains Power Supply Plug (UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
● This product uses parts of the software from the Independent JPEG Group. ● This product uses parts of the software owned by the Freetype Project (www.freetype.org). ● This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@ samsung.com.
A “covered work” means either the unmodified Program or a work based on the Program. To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well.
a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy.
The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations.
14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
GNU Lesser General Public License (LGPL) Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works.
1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work. A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit.
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.
15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Ustrezno odstranjevanje tega izdelka (odpadna električna in elektronska oprema) Oznaka na izdelku, dodatni opremi ali dokumentaciji pomeni, da izdelka in njegove elektronske dodatne opreme (npr. električni polnilnik, slušalke, kabel USB) ob koncu dobe uporabe ni dovoljeno odvreči med gospodinjske odpadke. Te izdelke ločite od drugih vrst odpadkov in jih odgovorno predajte v recikliranje ter tako spodbudite trajnostno vnovično uporabo materialnih virov.
Σωστή Απόρριψη αυτού του Προϊόντος (Απόβλητα Ηλεκτρικού & Ηλεκτρονικού Εξοπλισμού) (Ισχύει για την Ευρωπαϊκή Ένωση και για άλλες ευρωπαϊκές χώρες με χωριστά συστήματα συλλογής) Αυτό το σήμα που εμφανίζεται επάνω στο προϊόν, στα εξαρτήματά του ή στα εγχειρίδια που το συνοδεύουν, υποδεικνύει ότι το προϊόν και τα ηλεκτρονικά του εξαρτήματα (π.χ. φορτιστής, ακουστικά, καλώδιο USB) δεν θα πρέπει να ρίπτονται μαζί με τα υπόλοιπα οικιακά απορρίμματα μετά το τέλος του κύκλου ζωής τους.
Tinkamas šio gaminio išmetimas (elektros ir elektroninės įrangos atliekos) Šis ženklas, pateiktas ant gaminio, jo priedų ar dokumentacijoje, nurodo, kad gaminio ir jo elektroninių priedų (pvz., įkroviklio, ausinių, USB kabelio) negalima išmesti kartu su kitomis buitinėmis atliekomis gaminio naudojimo laikui pasibaigus.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
KKorrekt bortskaffelse af batterierne i dette produkt (Gælder i EU og andre europæiske lande med særlige retursystemer for batterier). Mærket på dette batteri, dokumentationen eller emballagen betyder, at batterierne i dette produkt efter endt levetid ikke må bortskaffes sammen med andet husholdningsaffald. Mærkning med de kemiske symboler Hg, Cd eller Pb betyder, at batteriet indeholder kviksølv, cadmium eller bly over grænseværdierne i EU-direktiv 2006/66.
Správná likvidace baterií v tomto výrobku (Platí v Evropské unii a dalších evropských zemích s vlastními systémy zpětného odběru baterií.) Tato značka na baterii, návodu nebo obalu znamená, že baterie v tomto výrobku nesmí být na konci své životnosti likvidovány společně s jiným domovním odpadem. Případně vyznačené symboly chemikálií Hg, Cd nebo Pb upozorňují na to, že baterie obsahuje rtuť, kadmium nebo olovo v množství překračujícím referenční úrovně stanovené směrnicí ES 2006/66.
