LCD TV Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Center Web Site BELGIUM 02 201 2418 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz DENMARK 38 322 887 www.samsung.com/dk FINLAND 09 693 79 554 www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/Min) www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12/Min) www.samsung.de HUNGARY 06 40 985 985 www.
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
English Contents Connecting and Preparing Your TV List of Parts.............................................................................. Installing the Stand.................................................................. Installing the Wall Mount Kit............................................... Viewing the Control Panel....................................................... Viewing the Connection Panel................................................. Viewing the Remote Control....................
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Viewing the Control Panel The product colour and shape may vary depending on the model. SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control. MENU Press to see an on-screen menu of your TV’s features. In case of DTV mode, the DTV menu appears. Press to decrease or increase the volume.
Viewing the Connection Panel [Side Panel Jacks] [Rear Panel Jacks] (32 inch, 37 inch, 40 inch) (26 inch model does not have the side panel jacks.) Power Input [Rear Panel Jacks] (26 inch) Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). - No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels). - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
Viewing the Remote Control Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) Television Standby button Number buttons for direct channel access Automatic Power-off P : Next channel P : Previous channel Exit the OSD C ontrol the cursor in the menu One/Two-digit channel selection Use to see information on the current broadcast display "Channel Manager" It on the screen.
Switching On and Off The mains lead is attached to the rear of your set. 1. Plug the mains lead into an appropriate socket. The standby indicator lights up on the front of the set. 2. Press the button on the front of the set. You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically. 3.
- Storing Channels Automatically - Storing Channels Manually Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2.
Setting the Channel Manager Set the channels according to your preference. You can easily delete, add, or lock the channel you want. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2. Press the or button to select "Channel Manager", then press the ENTER button. 3. Press the ENTER 4. Press the button to select " 5. Press the or button to select the undesired channel, then press the ENTER button to cancel. 6.
Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. G ive easily remembered numbers to the channels that you watch most often. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. 2. Press the or button to select "Sort", then press the ENTER button. 3.
LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2. Press the or button to select "LNA", then press the ENTER button. button. 3. Press the or button to select "On" or "Off". Press the ENTER button. 4. Press the EXIT button to exit.
Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 4 on page 11. 2. Press the or button to select "Reset", then press the ENTER button. 3. Press the EXIT button to exit. The "Reset" will be set for each picture mode. Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1.
DNIe Demo (Digital Natural Image engine) Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER button. 2.
PIP Settings O: PIP operates, X: PIP doesn’t operate Main Sub TV Ext.1 Ext.2 AV S-Video Component PC HDMI DTV TV X X X X X X O O X Ext.1 X X X X X X O O X Ext.2 X X X X X X O O X AV X X X X X X O O X S-Video X X X X X X X O X Component X X X X X X X O X PC X X X X X X X X X HDMI O O O O O O X X X DTV X X X X X X X X X Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast.
Setting the TruSurround XT (SRS TSXT) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any twospeaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button. 2.
Resetting the Sound Settings to the Factory Defaults If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER button. 2. Press the or button to select "Reset", then press the ENTER button. 3. Press the EXIT button to exit.
4. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 5. Press the or button to select "Off Timer", then press the ENTER button. 6. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 7. Press the EXIT button to exit.
Using the Energy Saving Feature This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption. 1. Press the MENU button to display the on-screen menu. Press the or button to select "Setup", then press the ENTER button. 2. Press the or button to select "Energy Saving", then press the ENTER button. 3.
Previewing the DTV Menu System To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. Available in the Digital TV mode. Press the D.MENU button.
Updating the Channel List Manually You can specify the channel or frequency for a fast channel search. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER 3. Press the or button to select "Manual Store", then press the ENTER 4. To... Then... Move to "Channel", "Frequency", or "Bandwidth" or button Set the "Channel", or "Bandwidth" or button Set the "Frequency" Numeric button (0~9) button. button.
Move 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER 3. Press the or button to select "Edit Favourite Channels", then press the ENTER button. 4. Select the required channel using the or button. 5. Press the green button. 6. Press the or button to select the channel that you want to move, and press the green or ENTER button. 7. Press the EXIT button to exit. button.
Displaying Programme Information While viewing a channel, additional information about the current programme may be displayed. 1. While viewing a programme, press the INFO ( ) button. The programme information is displayed. 2. To exit from banner information, press the INFO ( ) button. Viewing the EPG (Electronic Programme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broadcasters.
Using the Scheduled List If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled program at the scheduled time even if you are watching another program. 1. Press the D.MENU button to display the DTV menu. 2. Press the ENTER 3. Press the or button to select "Scheduled List", then press the ENTER 4. Press the red button. The channel will be switched to the scheduled program. 5.
Viewing All Channels and Favourite Channels In the EPG menu, you can display all channels or favourite channels. 1. Press the D.MENU button to display the DTV menu. 2. Press the ENTER 3. Select the your required guide ("Now & Next Guide" or "Full Guide") by pressing the or button. 4. Press the ENTER 5. Press the green button. All the channel lists and the favorite channel lists will be toggled. 6. Select a programme of your choice by pressing the , 6, 3, or 4 button. 7.
Choosing Your Language When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Preference", then press the ENTER button. 3. Press the or button to select "OSD Language", then press the ENTER button. 4. Select a particular language by pressing the or button repeatedly. Press the ENTER button. 5.
Setting the Subtitle You can activate and deactivate the subtitles. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Feature", then press the ENTER 3. Press the ENTER 4. Select "On" by pressing the or button. Press the ENTER 5. Press the EXIT button to exit. button. button again, to select "Subtitle". button. Selecting the Preferred Language (Subtitle or Audio) You can change the default value for subtitle and audio languages.
Checking the Signal Information You can get information about the signal status. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "System", then press the ENTER 3. Press the or button to select "Signal Information", then press the ENTER button. 4. Press the EXIT button to exit. button. If the signal status is poor, the "No signal." message is displayed.
Selecting the CI (Common Interface) Menu This enables the user to select from the CAM-provided menu. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "System", then press the ENTER 3. Press the or button to select "Common Interface", then press the ENTER button. button. 4. Select to "CI Menu" by pressing the or button, and press the ENTER 5. Select the required option by pressing the or button, and press the ENTER button. 6.
Displaying the Teletext Information You can display teletext information at any time, but signal reception must be good. Otherwise: Information may be missing. Some pages may not be displayed. To activate the teletext mode and display the contents page: 1. Using the P ( teletext service. 2. Press the TTX/MIX ( ) or P ( ) button, select the channel providing the ) button to activate the teletext mode. he contents page is displayed.
Using Fastext to Select a Teletext Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1. Display the teletext contents page by pressing the TTX/MIX ( 2. Press the coloured button corresponding to the topic that you wish to select (The available topics are listed on the status information line). 3. Press the Red button to display the previous page. Press the Green button to display the next page. 4.
Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the SOURCE button to select PC mode. 2. Press the MENU button to display the menu.
Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). Cable Figure 2 2.
Technical and Environmental Specifications Model Name Screen Size (Diagonal) Power Supply LE26R73BD LE32R73BD LE40R73BD 26 inch 32 inch 40 inch AC220-240V 50 Hz AC220-240V 50 Hz AC220-240V 50 Hz 120 W 152 W 190 W 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 5WX2 10 W X 2 10 W X 2 675.0 X 75.0 X 475.5 mm 675.0 X 215.5 X 530.0 mm 800.0 X 80.0 X 548.5 mm 800.0 X 252.0 X 603.0 mm 991.5 X 87.0 X 658.5 mm 991.5 X 326.0 X 713.0 mm 10.55 kg 15.45 kg 24.
Warning! Important Safety Instructions Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.
Wiring the Mains Power Supply Plug(UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
This page is intentionally left blank. BN68-01007A-X0Eng.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
