LCD TV Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Center Web Site BELGIUM 02 201 2418 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz DENMARK 38 322 887 www.samsung.com/dk FINLAND 09 693 79 554 www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/Min) www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12/Min) www.samsung.de HUNGARY 06 40 985 985 www.
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
Contents Connecting and Preparing Your TV List of Parts.............................................................................. Installing the Stand.................................................................. Installing the Wall Mount Kit............................................... Viewing the Control Panel....................................................... Viewing the Connection Panel................................................. Viewing the Remote Control.............................
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Viewing the Control Panel The product colour and shape may vary depending on the model. SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control. MENU Press to see an on-screen menu of your TV’s features. In case of DTV mode, the DTV menu appears. Press to decrease or increase the volume.
Viewing the Connection Panel [Side Panel Jacks] [Rear Panel Jacks] (32 inch, 37 inch, 40 inch) (27 inch model does not have the side panel jacks.) Power Input [Rear Panel Jacks] (27 inch) Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). - No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels). - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
Viewing the Remote Control Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 31~35) Television Standby button Number buttons for direct channel access One/Two-digit channel selection display "Channel Manager" It on the screen.
Switching On and Off The mains lead is attached to the rear of your set. 1. Plug the mains lead into an appropriate socket. The standby indicator lights up on the front of the set. 2. Press the button on the front of the set. You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically. 3.
- Storing Channels Automatically - Storing Channels Manually Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2.
Setting the Channel Manager Set the channels according to your preference. You can easily delete, add, or lock the channel you want. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2. Press the or button to select "Channel Manager", then press the ENTER button. 3. Press the ENTER 4. Press the button to select " 5. Press the or button to select the undesired channel, then press the ENTER button to cancel. 6.
Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. G ive easily remembered numbers to the channels that you watch most often. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. 2. Press the or button to select "Sort", then press the ENTER button. 3.
LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2. Press the or button to select "LNA", then press the ENTER button. button. 3. Press the or button to select "On" or "Off". Press the ENTER button. 4. Press the EXIT button to exit.
Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 11. 2. Press the or button to select "Reset", then press the ENTER button. 3. Press the EXIT button to exit. The "Reset" will be set for each picture mode. Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1.
DNIe Demo (Digital Natural Image engine) Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER button. 2.
PIP Settings O: PIP operates, X: PIP doesn’t operate Main Sub TV Ext.1 Ext.2 AV S-Video Component PC HDMI DTV TV X X X X X X O O X Ext.1 X X X X X X O O X Ext.2 X X X X X X O O X AV X X X X X X O O X S-Video X X X X X X X O X Component X X X X X X X O X PC X X X X X X X X X HDMI O O O O O O X X X DTV X X X X X X X X X Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast. 1.
Setting the TruSurround XT (SRS TSXT) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any twospeaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button. 2.
Resetting the Sound Settings to the Factory Defaults If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER button. 2. Press the or button to select "Reset", then press the ENTER button. 3. Press the EXIT button to exit.
4. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 5. Press the or button to select "Off Timer", then press the ENTER button. 6. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 7. Press the EXIT button to exit.
Using the Energy Saving Feature This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption. 1. Press the MENU button to display the on-screen menu. Press the or button to select "Setup", then press the ENTER button. 2. Press the or button to select "Energy Saving", then press the ENTER button. 3.
Previewing the DTV Menu System To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. Available in the Digital TV mode. Press the D.MENU button.
Updating the Channel List Manually You can specify the channel or frequency for a fast channel search. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER 3. Press the or button to select "Manual Store", then press the ENTER 4. To... Then... Move to "Channel", "Frequency", or "Bandwidth" or button Set the "Channel", or "Bandwidth" or button Set the "Frequency" Numeric button (0~9) button. button.
Move 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER 3. Press the or button to select "Edit Favourite Channels", then press the ENTER button. 4. Select the required channel using the or button. 5. Press the green button. 6. Press the or button to select the channel that you want to move, and press the green or ENTER button. 7. Press the EXIT button to exit. button.
Displaying Programme Information While viewing a channel, additional information about the current programme may be displayed. 1. While viewing a programme, press the INFO ( ) button. The programme information is displayed. 2. To exit from banner information, press the INFO ( ) button. Viewing the EPG (Electronic Programme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broadcasters.
Using the Scheduled List If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled program at the scheduled time even if you are watching another program. 1. Press the D.MENU button to display the DTV menu. 2. Press the ENTER 3. Press the or button to select "Scheduled List", then press the ENTER 4. Press the red button. The channel will be switched to the scheduled program. 5.
Viewing All Channels and Favourite Channels In the EPG menu, you can display all channels or favourite channels. 1. Press the D.MENU button to display the DTV menu. 2. Press the ENTER 3. Select the your required guide ("Now & Next Guide" or "Full Guide") by pressing the or button. 4. Press the ENTER 5. Press the green button. All the channel lists and the favorite channel lists will be toggled. button again, to select "Guide". button. 6.
Choosing Your Language When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Preference", then press the ENTER button. 3. Press the or button to select "OSD Language", then press the ENTER button. 4. Select a particular language by pressing the or button repeatedly. Press the ENTER button.
Setting the Subtitle You can activate and deactivate the subtitles. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Feature", then press the ENTER 3. Press the ENTER 4. Select "On" by pressing the or button. Press the ENTER 5. Press the EXIT button to exit. button. button again, to select "Subtitle". button. Selecting the Preferred Language (Subtitle or Audio) You can change the default value for subtitle and audio languages.
Viewing Product Information You can view your product information. For service or repair, please contact a Samsung approved dealer. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "System", then press the ENTER 3. Press the ENTER button. button again, to select "Product Information". he Product Information menu is selected. T - Software Version, Firmware Version 4. Press the EXIT button to exit.
Viewing Common Interface This contains information on CAM inserted in the CI slot and displays it. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "System", then press the ENTER 3. Press the or button to select "Common Interface", then press the ENTER button. 4. Press the ENTER 5. Press the EXIT button to exit. button. button to display the information for your application. The Application Info inserting is about the CI CARD.
Teletext Decoder Most set channels carry " teletext ", pages of written information that provide information such as: Television programme times. N ews bulletins and Weather forecasts. S ports results. Subtitles for the hard of hearing. The teletext pages are organized according to six categories: Contents Part A Selected page number. B Broadcasting station identity. C Current page number or search status. D Date and time. E Text. F Status information.
Selecting a Specific Teletext Page Press the number buttons on the remote control to enter the page number directly: 1. Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. 2. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the PIP ( ) . Press the PIP ( ) button again to resume. 3. Using the various display options: To display... Press the...
Setting Up Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR 1. T urn off your VCR. 2.
Setting Up the Remote to Operate Your DVD 1. T urn off your DVD. 2. Press the DVD button on your TV’s remote control. 3. Press the SET button on your TV’s remote control. 4. U sing the number buttons on your remote control, enter three digits of the DVD code listed on page 34~35 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.) 5.
Remote Control Codes VCR Brand SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO HARMAN KARDON HITACHI INSTANT REPLAY JC PENNEY JCL JVC KENWOOD KLH KONIA LG(Goldstar) LIOYD LOGIK LXI MAGNAVOX MARANTZ MARTA MEI MEMOREX MGA MIDLAND MINOLTA MITSUBISHI Code 000 001 002 003 004 005 077 078 079 020 025 004 027 032 007 026 018 022 002 003 006 008 01
CABLE BOX Brand SAMSUNG GI HAMLIN HITACHI JERROLD MACOM MAGNAVOX OAK PANASONIC PHILIPS PIONEER RCA REGAL Code 000 001 002 003 004 005 006 007 041 003 024 031 025 030 038 039 025 030 019 023 028 026 003 022 027 037 044 019 021 023 028 004 018 020 044 014 022 040 003 Brand REGENCY SA SCIENTIFIC ATLAN SPRUCER STARGATE 2000 SYLVANIA TEXSCAN TOCOM UNIVERSAL VIEWSTAR WARNER AMEX ZENITH Code 015 023 042 043 042 043 022 036 016 016 032 033 034 019 021 023 028 046 017 029 035 0
DVD Brand PANASONIC PHILIPS ROTEL RIO RCA RAITE ROWA SAMPO SONY SHERWOOD SVA SYLVANIA SHARP SANSUI SANYO SHINSONIC Code 024 034 124 134 136 137 138 036 076 117 118 120 023 035 074 075 131 132 073 038 104 026 029 126 127 128 129 130 141 039 041 042 043 093 140 062 062 090 094 Brand THOMSON TOSHIBA TECHNICS TVIEW TOKAI TEAC TECHWOOD TREDEX URBAN CONCEPTS VENTURER VOCOPRO YAMAHA YAMAKAWA XWAVE ZENITH Code 145 028 062 076 139 072 073 096 097 098 099 101 076 075 102 032 063 040 07
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on "Control Panel" on the Windows start menu. 2.
Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the SOURCE button to select PC mode. 2. Press the MENU button to display the menu.
Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). Cable Figure 2 2.
Technical and Environmental Specifications Model Name Screen Size (Diagonal) PC Resolution Input Signal Sync. Video Signal TV Colour System Sound System DTV Signal Reception UHF Cgannel Demodulation DTV Video/ Audio Decoding Video Decoding LE27S7 LE32S7 LE37S7 LE40S7 27 inch 32 inch 37 inch 40 inch 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz H/V Separate, TTL, P. or N. 0.7 Vp-p @ 75 ohm H/V Separate, TTL, P. or N. 0.7 Vp-p @ 75 ohm H/V Separate, TTL, P. or N.
Warning! Important Safety Instructions Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.
Wiring the Mains Power Supply Plug(UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
This page is intentionally left blank. BN68-01007K-00Eng.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
