Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA BELGIUM 0800-SAMSUNG (726-7864) 0032 (0)2 201 24 18 844 000 844 www.samsung.com/at www.samsung.com/be www.samsung.com/cz CZECH REPUBLIC Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK EIRE FINLAND 70 70 19 70 0818 717 100 030-6227 515 www.samsung.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".
English Contents Connecting and Preparing Your TV List of Parts......................................................... 2 Installing the Stand.............................................. 2 Installing the Wall Mount Kit................................ 2 Viewing the Control Panel................................... 3 Viewing the Connection Panel............................ 4 Viewing the Remote Control................................ 6 Installing Batteries in the Remote Control...........
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4XL16 Remote Control & Batteries (AAA x 2) Power Cord ♦ Owner's Instructions ➣ ➣ Cover-Bottom Stand Screw X 4 ♦ Warranty card Stand ♦ Safety Guide Cleaning Cloth ♦ Registration Cards Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model. Installing the Stand 2 1 1.
Viewing the Control Panel Side Panel buttons 1 2 3 4 5 6 8 8 7 The product colour and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, Ext., AV, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control. 2 MENU Press to see an on-screen menu of your TV’s features. 3 (Power) Press to turn the TV on and off. 6 Remote Control Sensor Aim the remote control towards this spot on the TV.
Viewing the Connection Panel [TV Rear Panel] 1 2 3 4 [TV Side Panel] 5 6 Power Input ! 0 9 8 7 ➣ The product colour and shape may vary depending on the model. ➣ ➣ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 EXT Connector EXT Input Audio (L/R) O Video O Output Video + Audio (L/R) Only TV or DTV output is available.
5 ANT IN To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 6 COMMON INTERFACE Slot - When CI Card isn’t inserted in some channels, "Scrambled Signal" is displayed on the screen. - The pairing information containing a telephone number, CI Card ID, Host ID and other information will be displayed in about 2~3 minutes.
Viewing the Remote Control 1 Television Standby button 2 Selects the TV and DTV mode directly 3 Number buttons for direct channel access 4 One/Two-digit channel selection 5 + : Volume increase : Volume decrease 6 Temporary sound switch-off 7 Use to quickly select frequently used functions. 8 Use to see information on the current broadcast 9 Colour buttons : Use these buttons in the Channel list, etc.
Installing Batteries in the Remote Control 1. 2. 3. ➣ Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. ➣ Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. ➣ If the remote control doesn’t work, check the following: 1. Is the TV power on? 2.
Viewing the Menus 1. W ith the power on, press the MENU button. The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input, Digital Menu. 2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s submenu. 3.
Plug & Play When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals.
9. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTER button. Even if the ENTER button is not pressed, the message will automatically disappear after several seconds. Language: Select your language. Country: Select your country. Auto Store: Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock. If you want to reset this feature... TV 1.
Storing Channels Manually Not available in DTV or external input mode. You can store television channels, including those received via cable networks. When storing channels manually, you can choose: ♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2.
Adding / Locking Channels ➣ Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add channels. Channel TV Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button.
Sorting the Stored Channels This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. ➣ TV Not available in DTV or external input mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button. 3. Select the channel number that you wish to change by pressing the ▲ or ▼ button.
Fine Tuning Channel Reception Use fine tuning to manually adjust a particular channel for optimal reception. ➣ Not available in DTV or external input mode. 1. Use the number buttons to directly select the channel that you want to fine tune. TV Channel Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 3.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ENTER 3. Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER button. 4. Press the EXIT button to exit. TV button again, to select "Mode".
Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the ▲ or ▼ button to select a particular item. Press the ENTER button. 3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. 4. Press the EXIT button to exit.
Changing the Picture Options 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. 3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 4. When you are satisfied with your setting, press the ENTER button. 5. Press the EXIT button to exit.
♦ Screen Mode: Wide/16:9/Wide Zoom/Zoom/4:3 When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. ♦ Wide: Sets the picture to 16:10 wide mode. ♦ 16:9: Sets the picture to 16:9 wide mode. ♦ Wide Zoom: Magnify the size of the picture more than 4:3.
Sound Features 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off TV Speaker : On 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. Move 4. Press the EXIT button to exit.
♦ Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. ♦ TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier.
Setting and Displaying the Current Time You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 3. Press the ENTER 4. 5.
Switching the Television On and Off Automatically 1. Press the MENU button to display the menu. Setup TV Plug & Play Press the ▲ or ▼ button to select "Setup", then press the Language : English Time ENTER button. Melody : Off Energy Saving : Off 2. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2", "Timer 3", then press the ENTER button. Three different On/Off Timer Settings can be made.
Melody / Energy Saving 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. TV Setup Plug & Play Language : English Time Melody : Off Energy Saving : Off 3. When you are satisfied with your setting, press the ENTER button. Move 4. Press the EXIT button to exit.
Selecting the Source You can select among external sources connected to your TV’s input jacks. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER button. 2. Press the ENTER button again, to select "Source List". Available signal sources: TV, Ext., AV, Component, PC, HDMI, DTV. You can choose only those external devices that are connected to the TV. Select the required device by pressing the ▲ or ▼ button. Press the ENTER button. 3.
Previewing the DTV Menu System ♦ The company does not guarantee the normal operation of the DTV menu for countries other than the supported countries (France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria) because only these country standards are supported. In addition, when the country of the broadcast stream differs from the country selected by the current user, the string appearing in the channel banner, Info, Guide, Channel Manager, etc. may not be displayed properly.
Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location. DTV Channel Country :United Kingdom Auto Store Manual Store Edit Favourite Channels Channel List 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button. Move Enter Return 3.
Editing Your Favourite Channels You can edit your favourite channels using the four colour buttons. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER button. 4. Press the red button to display all currently stored channels. 5.
♦ Renumber (depending on the country) DTV 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER button. 4. Select the required channel using the ▲ or ▼ button. 5. Press the green button. ➣ The space for entering the number is a blank. 6. Enter the new channel number.
Selecting Channel List You can exclude the channels you have chosen from the channels you have scanned.When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. Test Card M'TOOLS v2.0 1 3 4 5 6 15 16 17 Test Card M' v2.0 Vida003b Vida004b vida005b vida006b Ch 15 QVC UKTV Gold Channel List 23 25 26 27 28 15 33 55 bid-up.
Viewing the EPG (Electronic Programme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available. ♦ Now & Next Guide For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.
Using the Scheduled List If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled programme at the scheduled time even if you are watching another programme. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ENTER button, to select "Guide". 3. Press the ▲ or ▼ button to select "Scheduled List", then press the ENTER button. 4. Press the red button.
TOOLS Viewing All Channels and Favourite Channels In the EPG menu, you can display all channels or favourite channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the Now & Next Guide ENTER button. 13:28 Wed 16 Feb 27 Discovery Extreme Machines: Armoured Cars 2. Press the ENTER button again, to select "Guide". All Channels 3. Select the your required guide ("Now & Next Guide" or "Full Now Next Guide") by pressing the ▲ or ▼ button. 4.
Setting up the Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it later, if necessary). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2.
Setting the Subtitle You can activate and deactivate the subtitles. DTV 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Subtitle ", then press the ENTER button. 4. Select "On" by pressing the ▲ or ▼ button. Press the ENTER button. 5. Press the EXIT button to exit.
Selecting the Audio Description This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2.
Selecting the Time Zone (Spain only) Select the local time zone. DTV 1. P ress the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ ������������������������������������������������ or ▼������������������������������������������ button to select "Setup", then press the ENTER button. 3.
Checking the Signal Information You can get information about the signal status. DTV Signal Information Service: ? 1. Press the MENU button to display the menu. Service ID:0000 Multiplex: ? (TSID 0000, ONID 0000) Press the ▲ or ▼ button to select "Digital Menu", then press the Network: ? (ID 0000) ENTER button. Bit error level: 10 Signal Strength: 0 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Move Enter Return 3.
Viewing Common Interface This contains information on CAM inserted in the CI slot and displays it. DTV Application Info Type : CA Manufacturer : Channel Plus 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Common Interface", then press the ENTER button. 4.
Resetting You can reset the values stored to the factory default values. ➣ The Reset operation deletes all channel information and user preferences returning all values to their default factory state. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 3. Press the ▲ or ▼ button to select "System", then press the ENTER button. 4.
Preference This menu consists of 6 sub-menus: DTV Language Primary Audio Language, Secondary Audio Language, Primary Audio Language Subtitle Language, Secondary Subtitle Language, Primary Subtitle Language Teletext Language, Secondary Teletext Language. Teletext Language Using this feature, users can select one of the languages. Preference The language selected here is the default when the user selects a channel.
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. 2. First, click on "Control Panel" on the Windows start menu.
Setting up the TV with your PC Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. 4. Press the EXIT button to exit.
Teletext Feature Most television stations provide written information services via Teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. 1.
The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting station identity. Current page number or search status. Date and time. Text. Status information. FASTEXT information.
경고 주의 Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure 경고 your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, 주의 causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling: 1.
Troubleshooting: Before Contacting Service Personnel No sound or picture. Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume. Normal picture but no Check the volume. sound. Check whether the MUTE button has been pressed on the remote control. Check if "TV Speaker" is on. Screen is black and power On your computer check; Power, Signal Cable.
Technical and Environmental Specifications Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) LE22A455 / LE22A457 22 inch 1680 x 1050 @ 60 Hz 3W x 2 558 X 67 X 404 mm 558 X 216 X 453 mm 7 kg 10 °C to 40 °C (50 °F to 104 °F) 10 % to 80 %, non-condensing -20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensin
