User Manual
Table Of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Screen Setup
- Configuring the PIP/PBP Settings
- Adjusting OSD (On Screen Display) settings
- Setup and Reset
- Installing the Software
- Troubleshooting Guide
- Specifications
- Appendix
31
Size
Select the size and aspect ratio of the sub-screen.
• : Select the icon image if you want to use PBP mode where the optimum resolution for the left
and right sides of the screen is 1720 x 1440 (width x height).
• : Select the icon image if you want to use PIP mode where the optimum resolution for the sub-
screen is 720 x 480 (width x height).
• : Select the icon image if you want to use PIP mode where the optimum resolution of the sub-
screen is 1280 x 720 (width x height).
• : Select the icon image if you want to use PIP mode where the optimum resolution of the sub-
screen is 1720 x 720 (width x height).
Position
Select the position of the sub-screen from the available options.
• / / /
―
Not available when PBP is selected.
―
The screen may flicker if the input signal is unstable.
Sound Source
Set which screen you want to hear the sound for.
PIP mode
/
PBP mode
/










