User Manual
Table Of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Screen Setup
- Configuring the PIP/PBP Settings
- Adjusting OSD (On Screen Display) settings
- Setup and Reset
- Installing the Software
- Troubleshooting Guide
- Specifications
- Appendix
14
Reverse Side
―
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
1
2
Port Description
Connect the power cord for your monitor to the POWER IN port on the back
of the product.
Connects to a source device using an HDMI cable or HDMI-DVI cable.
Connects to a PC using a DP cable.
Connects to a source device using a USB Type-C cable. Compatible with a
USB cable version 3.0 or lower.
Port Description
1
2
Connect to a USB device.
These ports are enabled when a PC is connected to the
using a USB
Type-C to A cable or a USB Type-C cable.
Connect to a USB device.
This port is enabled when a PC is connected to the using a USB Type-C
to A cable or a USB Type-C cable. And USB 3.0 is supported only when a PC
is connected to the
using a USB Type-C to A cable.
Connect to an audio output device such as headphones.