Owner's Manual

30
3
Base on the test result, select Yes / No / Show Again.
Yes No Show Again
Do you still see the same problem on the test screen?
If you need to see the photo again, click Show Again.
• You will see the following screen when you select Yes.
Self Diagnosis Complete
Contact the Samsung Call Center for assistance.
Please have the following information ready:
‐ Model Code: **************
‐ Software Version: *-*********-****.*
‐ S/N: **************
OK
• You will see the following screen when you select No.
Self Diagnosis Complete
If the test screen is okay during Self Diagnosis, your monitor may not have a problem. If the
problem persists, follow the steps below:
‐ Turn off your monitor and any other connected device, such as a PC.Turn on your monitor first
and then the other connected device.
‐ Update the operating system and graphics card driver to the latest version and restart your PC.
‐ Connect the other device, such as a PC, to a different input port on your monitor.
‐ Reset your monitor by pressing the jog button on the monitor and selecting Support > Reset
All.
‐ Replace the cable with the one enclosed with your monitor.
OK
Information
View the current input source mode, frequency and resolution that are in use and the current product
version.
Reset All
Return all the settings for the product to the default factory settings.