Owner's Manual
Table Of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Screen Setup
- Adjusting OSD (On Screen Display) settings
- Setup and Reset
- Support
- Installing the Software
- Troubleshooting Guide
- Specifications
- Appendix
11
Direct Key Guide
―
On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed.
―
The function buttons page shows if Eye Saver Mode is enabled.
: On
: Off
Analog mode
Brightness
Volume
Source
Eye Saver Mode
Off
Auto Adjustment
Features
―
Analog mode option
• UP: Adjust Brightness, Contrast.
• DOWN: Adjust Volume, Mute.
• LEFT: Adjust Source.
• RIGHT: Adjust Auto Adjustment.
―
Changing the resolution in Display Properties will activate the Auto Adjustment function.
―
This function is only available in Analog mode.
• PRESS(ENTER): Display Function Key Guide.
HDMI, DisplayPort mode
Brightness
Volume
Source
Eye Saver Mode
Off
Features
―
HDMI, DisplayPort mode option
• UP: Adjust Brightness, Contrast, Sharpness.
• DOWN: Adjust Volume, Mute.
• LEFT/RIGHT: Adjust Source.
• PRESS(ENTER): Display Function Key Guide.