Instructions Getting to know your camera ■ Use this camera in the following order Set up the camera driver Take a picture Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.81) Take a picture. (p.16) Thank you for buying a Samsung Digital Camera. ● Prior to using this camera, please read the user manual thoroughly.
Danger DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ■ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ■ Leaking, overheating, or burst battery could result in fire or injury. •Use battery with the correct specification for the camera. •Do not short circuit, heat or dispose of battery in fire. •Do not insert the battery with the polarities reversed. ■ Remove the battery when not planning to use the camera for a long period of time.
Contents ■Photo Frame ……………………32 ■Fn button …………………………33 ■Size ………………………………34 ■Quality / Frame rate ……………34 ■Metering …………………………35 ■Continuous shot …………………35 ■ISO ………………………………36 ■White balance ……………………36 ■Exposure compensation ………37 ■Long Time shutter ………………38 ■Movie Clip frame stabiliser ………38 ●Using the LCD monitor to adjust the camera settings …………………39 ■Sharpness ………………………39 ■Contrast …………………………39 ■Voice Memo ……………………40 ■Voice Recording …………………40 ■Recording the movie clip without voice ………………………………41 ■S
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > User manual, Product warranty Camera case DPOF compatible printer (see p.68) Camera strap Software CD (see p.81) Computer (see p.85) PictBridge compatible printer (see p.71) SD memory card / MMC (see p.
Identification of features Front & Top Shutter button Power button Self timer lamp Flash Lens Microphone 《6》
Identification of features Back Camera Status Lamp Zoom T button (Digital zoom) Zoom W button (Thumbnail) M (Mode) button LCD monitor Camera Strap E (Effects) button 5-function button Fn / Delete button Playback mode / Printer button 《7》
Identification of features 5-function button Side / Bottom Information / Up button Menu / OK button USB / AV port Flash / Left button Self-timer / Right button DC connection terminal Macro / Down button Play & Pause button Battery Chamber Memory Card Slot Tripod socket Battery Chamber Cover 《8》 Speaker
Identification of features ■ Self-timer lamp Icon Status Blinking Blinking Blinking Description - For the first 7 seconds, the lamp blinks at 1 second intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25second intervals. For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. ■ Mode icon : Refer to page 16 for more information about the camera mode setting.
Connecting to a Power Source ■ Number of images and battery life: Using the SLB-0637 Still image Battery life Number of images Approx. 75 MIN Approx. 150 Using the fully charged battery Auto mode 7M image size Based Based Fine image quality Shot to shot interval : 30Sec. on on Changing the zoom position the the following between the Wide and the Tele following shooting shooting ends every 1 shot.
Connecting to a Power Source ■ You can charge the rechargeable battery (SLB-0637) with SBC-L7. ■ How to charge the rechargeable battery (SLB-0637) 1. Connect the charger and AC cord 3. Match contact points of the battery and charger and attach the battery on the charger as shown. If the battery is charged correctly, red lamp turns on. When the battery is fully charged, the lamp turns off. 2. Connect the AC cord to a mains supply.
Connecting to a Power Source ■ Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover. ■ There are 4 indicators for battery condition that are displayed on the LCD monitor.
Instructions on how to use the memory card ● Be sure to format the memory card (see p.48) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ● Turn off the camera power whenever the memory card is being inserted or removed. ● Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card ■ The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards). Card pins ■ When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
LCD monitor indicator ■ The LCD monitor displays information about the shooting functions and selections. ① ⑳ ⑲ p.39 p.39 ⑰ 8 Auto Focus Frame p.16 ⑤ ⑬ ⑥ ⑫ ⑦ ⑪ ⑩ [Image & Full Status] Icons p.22 Contrast ⑭ Description Page Sharpness ④ No. Icons 7 ⑮ ⑨ Macro 6 ③ ⑧ Description 5 ⑱ ⑯ ② No. Page 1 Recording mode p.9 2 Saturation p.28 3 Flash / Mic. Off p.23/17 4 Self-timer p.25 9 Camera shake Warning 10 Date / Time p.
Changing the recording mode ■ You can select the desired working mode by the M (mode) button located on the back of the camera. Auto, Program, movie clip, EPS, scene (night, portrait, children, landscape, close-up, text, sunset, dawn, backlight, fireworks, beach & snow) camera modes are available. ● Selecting the camera mode 1. Insert the battery (p.12). 2. Insert the memory card (p.12). As this camera has a 20MB internal memory, it is not essential to insert the memory card.
Starting the recording mode ■ How to use the Movie clip mode A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the Movie clip mode by pressing the M (Mode) button (p.26). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the shutter button once and movie clips are recorded for as long as the available recording [MOVIE CLIP mode] time allows.
Starting the recording mode ■ How to use the Program mode Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. 1. Select the Program mode by pressing the M (Mode) button (p.26). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the shutter button to capture an image. ※ Refer to page 22-41 for more information about [PROGRAM mode] the Program mode menus.
Starting the recording mode ■ How to use the Scene modes Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the Scene mode by pressing the M (Mode) button (p.26). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the shutter button to capture an image. [SCENE mode] ※ The scene modes are listed below. [NIGHT] ( ) : Use this for shooting still images at night or in other dark conditions.
Using the camera buttons to set the camera ■ The recording mode function can be set up by using the camera buttons. ZOOM W / T button ● If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. POWER button ● Used for turning the camera’s power on / off. ● If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 46 for more information about the auto power off function.
ZOOM W / T button ● WIDE Zoom Optical zoom WIDE INFORMATION : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Info ( ) / Up button ■ While the menu is showing, the Up button operates as a direction button. In the recording modes or playback mode, pressing this button will display the information of image. Info ( Macro ( ) / Down button ■ While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below.
Macro ( ) / Down button ■ Available focusing method, by recording mode (● : Selectable, ∞: Infinity focus range) Mode ● Normal ● Macro ● Auto macro ● ● 1. The image to be captured. 2. Press the SHUTTER button halfway and focus on the subject. ● 3. Recompose the picture and fully depress the SHUTTER button.
Flash ( ) / Left button INFORMATION ● If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move until the second flash fires. ● Using the flash frequently will reduce the life of the battery. ● Under normal operating conditions the charging time for the flash is normally less than 5.5 seconds. If the battery is weak, the charging time will be longer.
Flash ( ) / Left button ● Available flash mode, by recording mode (● : Selectable) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Self-timer ( ● ) / Right button ■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. ■ When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image. ● Selecting the self-timer 1.
MENU / OK button M (Mode) button ■ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the followings are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected. ■ You can select the desired recording mode.
E (Effect) button Special Effect (E button) : Colour ■ It is possible to add special effects to your images by using this button. ■ Still image mode : You can select the colour, image editing and Fun menu. ■ Movie clip mode : You can select the colour menu. ■ Available Effects, by recording mode (● : Selectable) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ■ By using the camera’s digital processor, it is possible to add special effects to your images 1.
Special Effect (E button) : Colour ■ Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image. Special Effect (E button) : Image editing Saturation Custom Color ■ You can change the saturation of the image. ● Press the E button in an available mode. (p.
Special Effect (E button) : FUN ● Moving and changing the focus frame You can change the focus frame after selecting a Range menu. Preset focus frames ■ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. ● Press the E button in an available mode. (p.27) ● This menu can be selected in the 3M, 1M image size. FUN 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the Fn button. 3.
Special Effect (E button) : FUN ※ Selecting 2 composite shooting Composite shooting ■ You can combine 2 - 4 different shots in a still image. 6 6 ● Press the E button in an available mode. (p.27) FUN Pressing the shutter button SH Capture SH Capture Composite Pressing the shutter button Move E Exit Composite OK Set 6 100-0031 Select a desired menu by pressing the Left / Right button and press the OK button.
Special Effect (E button) : FUN ● Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the Fn button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press the Fn button again and a previous image will be deleted again. 6 6 ● Changing a part of composite shot after taking the last shot 1.
Special Effect (E button) : FUN Select a desired sub menu by pressing the Left / Right button and press the OK button. Photo Frame ■ You can add 9 types of frame-like borders to a still image you want to capture. - : The photo frame will not be added. ■ Date & Time information will not be printed on the stored image taken with Photo Frame menu. ● Press the E button in an available camera modes. (p.27) ●This menu can be selected in the 5M, 3M, 1M image size.
Fn button ■ You can use the Fn button to set the following menus. ■ How to use the Fn menu (●: Selectable) Page Size ● ● ● ● ● Quality ● ● ● ● ● p.34 ● p.35 Metering ● Shooting ● ISO ● White Balance ● EV ● LT Stabilisation *1 ● p.34 1. Press the Fn button in an available mode 2. Select a desired menu by pressing the Up / Down button. And then a sub menu will display on the left bottom side of the LCD monitor. 6 6 p.35 p.36 SIZE ● p.36 3072X2304 ● p.37 ● p.38 *2 ● p.
Size Quality / Frame rate ■ You can select the image size appropriate for your application. ■You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Metering ■ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - [Multi] - [Spot] - [Center] : Exposure will be calculated based on 6 an average of the available light in the image area. However, the calculation will be biased towards the METERING centre of the image area. This is suitable for general use. Multi : Only the rectangular area in the [ PROGRAM mode ] centre of the LCD monitor will be metered for light.
Continuous shot White balance INFORMATION ● If less than 3 pictures are available in the memory, the AEB shooting is not available. ● It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur. ISO ■ ISO : You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers.
White balance ● Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white. 2. OK button : selects previous custom White paper white balance.
Long Time shutter Movie Clip frame stabiliser ● This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. 1. Select the [Nightscene] scene mode. (p.19, 41) 2. Press the Fn button and Long Time shutter menu will be displayed. 3. Configure the Long Time shutter value with the 5 function button. 4. Press the Fn button again.
Using the LCD monitor to adjust the camera settings ■ You can use the menu on the LCD monitor to set up recording functions. ■ The items indicated by Sub menu Menu Sharpness Contrast Voice Memo are default settings. Available mode Soft Normal Vivid - High Normal Low - Off On Page p.39 Sharpness ■ You can adjust the sharpness of the picture you are about to take.
Voice Memo ■ You can add your voice-over to a stored still image. Voice Recording RECORDING Sharpness Contrast Voice Memo Voice Recording ◀ Back Off On OK Set - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture. The picture is stored on the memory card. - Voice memo will be recorded for ten seconds from the moment the picture is stored.
Voice Recording Recording the movie clip without voice ● Pausing while recording a voice Using this function, you can record your favorite voice clips into a voice recording file without having to create multiple voice recording files. 1. Press the Pause button ( ) to pause recording. 2. Press the Pause button ( ) again to resume the recording. 3. If you wish to stop recording, press the shutter button again. ■ You can record the movie without voice.
Sound menu Sound ( ■ In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu Sub menu Available mode Page ) [ Volume ] ■ You can set select a volume of sound, start up sound, shutter sound, warning sound and AF sound.
Sound ( ) Setup menu [ Beep Sound ] ■ If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. ● [Sound] sub menu : [Off], [Sound 1, 2, 3] SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound ◀ Back Off Sound1 Sound2 Sound3 OK Set ■ In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode.
Setup menu Menu tab Setup 1 ( Main menu Sub menu Off Page 0.5sec Quick View Power off Set up 2 1sec 3sec 1min 3min 5min 10min 《44》 [ File name ] ■ This function allows the user to select the file naming format. p.46 p.46 LCD save Off On p.47 Video Out NTSC PAL p.47 Format No Yes p.48 Reset No Yes p.48 ※ Menus are subject to change without prior notice.
Setup 1 ( ) [ Language ] [ Imprinting the recording date ] ■ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. ■ There is an option to include DATE / TIME on still images. - LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese, T.
Setup 1 ( ) Setup 2 ( ) [ Start up image ] [ Quick view ] ■ You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. ■ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
Setup 2 ( ) [ LCD save ] [ Selecting Video out type ] ■ If you set the [LCD save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically. ■ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ● [LCD save] sub menu [Off]: The LCD monitor will not be turned off.
Setup 2 ( ) [ Formatting a memory ] [ Initialisation ] ■ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. ■ All camera menu and function settings will be restored to their default values. However, values for DATE/ TIME, LANGUAGE, and VIDEO OUT will not be changed. ● Sub menus [No] : The memory will not be formatted.
Starting play mode ■ If the memory card is inserted in the camera, all the camera functions apply only to the memory card. ■ If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ■ If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode.
Starting play mode ■ Movie clip capture function : capture still images from the movie clip. ■ On camera movie trimming : You can extract desired frames of movie clip during the movie clip play back. ● How to capture the movie clip Steps 1-3 are the same as those for playing back a movie clip. 4. Press the Play & Pause( ) button while playing the movie clip. Then press the E button. 5. The paused movie clip is saved in a new file name.
Starting play mode ● Playing back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice file and press the Play & Pause( ) button to play back a recorded voice file. Play - To pause a recorded voice file, while playing it back, press the Play & Pause( ) button again. - To resume playback of the voice file, press the Play & Pause( ) button. - To rewind the voice file while it is playing, press the LEFT button.
Using the camera buttons to set the camera ■ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( ) / Enlargement ( ) button ● You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ● Thumbnail display 1. While an image is displayed on full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail ( ) / Enlargement ( ) button ●The maximum enlargement rate in proportion to the image size Info( ) / Up button ■ When the menu is displayed on the LCD monitor, the UP button operates as a direction button. Image size Maximum enlargement rate X8.0 X8.0 X8.0 ● Trimming : You can extract part of the image that you want and save it separately. X9.0 X5.3 X4.
Play & Pause ( ) / Down button ■ In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. During playback : Temporarily stops playback.
Delete ( ) button Printer ( ■ This deletes images stored on the memory card. 1. Select an image that you want to delete by pressing the Left / Right button and press the DELETE ( ) button. ■ When the camera is connected to a PictBrdge printer, you can print images by pressing the Printer button. ◀ Delete? Delete? No Yes No Yes ▶ Print OK Confirm [Single Image] ) button OK Menu OK Confirm [Thumbnail Image] 2.
Special Effect (E button) : Resize ■ Change the resolution (size) of pictures taken. ● A large sized image can be resized to a smaller sized image, but not vice versa. 1. Press the play mode button and press the E button. 2. Press the Left / Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. ● Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized.
Special Effect (E button) : Rotating an image ■ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the E button. 2. Press the LEFT / RIGHT button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button.
Special Effect (E button) : Colour ■ Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image. : Select / setup the Custom Colour - Up / Down button : Selects R, G, B - Left / Right button : Change the values 1. Press the play back button and press the E button. 2. Select menu tab by pressing the Left / Right button.
Special Effect (E button) : Image editing ● Saturation control : You can change the saturation of image. 1.Select by pressing the Up / Down button. 2. Press the OK button. 3. Select a saturation menu by pressing the Up / Down button. 4. Change the saturation by pressing the Left / Right button. 5. Press the OK button and the image will be saved as a new file name. Special Effect (E button) : FUN Preset focus frames ■ You can make the subject stand out from its surroundings.
Special Effect (E button) : FUN ● Moving and changing the focus frame You can change the focus frame after selecting a Range menu. Composite image 1. Select a focus frame by pressing the Left / Right button and press the OK button. 2. Move the location of the frame by pressing the 5 function button. 3. Press the OK button and the file saves as a new file name. ■ You can combine 2 - 4 different shots in a still image. ● This menu can be selected in the 3M, 1M image size.
Special Effect (E button) : FUN ※ Selecting 2 composite shooting ● Before selecting the last composite image, you can change a part of composite image. Pressing the 5 function button Move OK 1. Press the Fn button and previous image will be deleted. 2. Press the OK button and you can select a new image.
Special Effect (E button) : FUN ■ Select a desired sub menu by pressing the Left / Right buttn and press the OK button to save the image as a new file name. Photo Frame ■ You can add 9 types of frame-like borders to a still image you want to capture. ● Date & Time information will not be printed on the stored image taken with Photo Frame menu. ● This menu can be selected in the 3M, 1M image size.
Setting up the play back function using the LCD monitor ■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Menu Tab SLIDE SHOW ( ) Main Menu Sub Menu Secondary Menu Page Show Play / Repeat Play - p.
Setting up the play back function using the LCD monitor Menu tab Main menu Quality Date Print File Name Reset Sub menu Auto Draft Normal Fine Auto Off On Auto Off On No Yes ※ Menus are subject to change without prior notice. 《64》 Secondary menu - Page Starting the slide show ( ) ■ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2.
Starting the slide show ( ) ● Configure slide show effects : Unique screen effects can be used for the slide show. ● Setting play interval : Set the slide show play interval. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval. 3. Press the OK button to save the configuration.
Playback ( ) Voice memo Deleting images ■ You can add your voice to a stored still image. PLAYBACK Voice Merno Delete Protect DPOF Copy to Card ◀ Back Off 끄기 On OK 정지00:00:10 Set [Voice memo menu] SH REC [Ready for recording] SH Stop [Voice is recording] - Press the shutter button to take a picture. The images are saved on the memory. After saving the image, the voice is recording for 10 seconds. - To stop the recording, press the shutter button. 《66》 1.
Playback ( ) INFORMATION ● Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card.
Playback ( ) DPOF ■DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. ■The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. ■This function is not available for Movie clips and Voice recording files.
Playback ( ) ■ Index : Images (except for movie clips and voice file) are printed as index type. 1. Press the Up / Down button and select the PLAYBACK [DPOF] menu tab. And then press the Right Standard button. Index Size 2. Press the Right button again and [Index] sub menu will dispaly. 3. Select a desired sub menu by pressing the UP / ◀ Back DOWN button. If [No] is selected : Cancel the index print setting. If [Yes] is selected : The image will be printed in index format. 4.
Playback ( ) Copy To Card : This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [COPY TO CARD] menu tab by PLAYBACK pressing the Up / Down button. And then press Voice Memo the Right button. Delete Protect 2. Select a desired sub menu by pressing the UP/ DPOF No Copty to Card DOWN button and press the OK button. Yes - [No] : Cancels "Copy to Card".
PictBridge ■ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ※ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do the step 1, 2 again. ● Setting up the camera for connection to the printer 1.
PictBridge : Picture Selection PictBridge : Print Setting ■ You can select images you want to print ■ You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. ● Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. 2. Use the Up / Down buttons to select the [Images] menu and press the Right button. 3. Use the Up / Down buttons to select a desired sub menu and press the OK button.
PictBridge : Reset Important notes ■ Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [No] is selected : Settings will not be reset. If [Yes] is selected : All print and image settings will be reset.
Important notes ■ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator ■ There are several warnings that may appear on the LCD display. Memory Error! ㆍMemory card error → Turn off the camera power and turn it on again → Insert the memory card again → Insert and format the memory card (p.
Before contacting a service centre ■ Please check the following The camera doesn’t switch on ㆍThere is low battery capacity → Insert fresh batteries. (p.12) ㆍBattery is inserted incorrectly with the polarities reversed. → Insert the battery according to the polarity marks (+, -) The camera power ceases while in use ㆍThe battery is exhausted → Insert fresh batteries ㆍThe Camera is turned off automatically → Turn on the camera power again.
Before contacting a service centre The flash does not fire ㆍFlash off mode has been selected → Dis-engage flash off mode ㆍThe camera mode can’t use the flash → Refer to the FLASH instruction (p.
Specifications Image Sensor - Type : 1/2.5" CCD - Effective Pixel : 7.1 Mega-pixel - Total Pixel : 7.4 Mega-pixel Lens - Focal Length : NV Lens f=6.3 ~ 44.1mm (35mm film equivalent : 38 ~ 266mm) - F No. : F3.5 ~ F5.4 - Digital Zoom :·Still Image mode : 1.0X ~ 5.0X ·Play mode : 1.0X ~ 9.0X (depends on image size) LCD Monitor - 2.
Specifications Storage - Media ·Internal memory : Approx. 20 MB flash memory ·External memory (Optional) : SD / MMC (Up to 2GB Guaranteed), SDHC (Up to 4GB Guaranteed), MMC Plus (Up to 2GB Guaranteed, , 4 bit 20MHz) ※Some cards are not compatible according to the memory card manufacturer and memory card type. - File Format ·Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Software Notes System Requirements Please ensure that you read the instruction manual carefully before use. For Windows For Macintosh •The attached software is a camera driver and image editing software tool for Windows. PC with processor better than •Under no circumstances should all or part of either the software or the user manual be reproduced. (Pentium 800MHz recommended) •Copyrights for software are licensed only for use with a camera. Windows 98SE / 2000 / ME / XP Mac OS 9.0 ~ 10.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. Depending on the Operating System (OS), screen captures illusted on this manual can be varied. ■ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Setting up the application software 2. Install the camera driver, DirectX, Quick Time and Digimax Master by selecting a button shown on the monitor. If an upper version of DirectX was installed on your computer, DirectX may not be installed.
Setting up the application software 《83》
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was set up successfully.
Starting PC mode ■ Connecting the camera to a PC ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk → DCIM → 100SSCAM]. The image files will then be displayed.
Starting PC mode 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. 5. Click a folder where you want to paste the file. 7. An image file is transferred from the camera to your PC. - By using [Digimax Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. 6. Press the right mouse button and a popup menu will open. Click [Paste].
Removing the removable disk ■ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. 4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button. ■ Windows 2000/ME/XP (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.0 ~ 10.4. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Removing the USB Driver for Windows 98SE ■ To remove the USB driver, refer to the process shown below. 1.
Digimax Master ■ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. ■ To start the program, click [Start → Programs → Samsung → Digimax Master → Digimax Master]. ● Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. - To download the captured images, select the [Select All] button.
Digimax Master ● Image viewer : You can view the stored images. ① ● Image edit : You can edit the still image. ⑤ ⑥ ① ④ ⑦ ② ③ ④ ② ③ - Image viewer functions are listed below. ① Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ② Image selection window : You can select the desired images in this window. ③ Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
FAQ Digimax Master FAQ ● Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ■ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. → Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly.
FAQ Case 6 Case 7 Case 8 《92》 When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. → Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO 《94》 MEMO
MEMO MEMO 《95》
MEMO 《96》 MEMO
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS GmbH OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8222, 8488, 8490 FAX : (82) 31-740-8398 www.samsungcamera.com ZENTRALE, KEINE REPARATUR AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS, GERMANY TEL : 49 (0) 6196 66 5303 FAX : 49 (0) 6196 66 5366 TECHNISCHE SERVICE HOTLINE : 00800 4526 3727 (nur kostenfrei fur Anrufe aus Deutschland) SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
