Instructions Getting to know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. Set up the camera driver Take a picture Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.114~116) Take a picture. (p.
DANGER WARNING DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or burst battery could result in fire or injury. – Use battery with the correct specification for the camera. – Do not short circuit, heat or dispose of battery in fire. – Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents 025 026 026 026 026 027 028 029 030 031 033 034 035 035 036 036 037 038 038 039 040 040 040 041 042 043 044 Things to watch out for when taking pictures Focus lock Using the camera buttons to set the camer camera POWER button Shutter button FR (Face Recognition) button ZOOM W / T button Info / Up button Macro / Down button Flash / Left button Self-timer / Right button MENU / OK button Fn button How to use the Fn menu Size Quality / Frame rate Drive mode Metering ISO White balance Exposure compensa
Contents 059 059 059 SETUP2 062 Starting play mode 059 060 060 060 061 062 PLAY 062 063 063 064 064 065 065 066 066 066 068 068 069 069 069 070 071 006 Auto focus lamp Start up image Quick view Auto power off LCD save Selecting video out type Formatting a memory Initialisation Playing back a still image Playing back a movie clip Movie clip capture function On camera movie trimming Playing back a recorded voice Playing back a voice memo LCD monitor Indicator Using the camera buttons to set the ca
Contents 088 089 090 090 PictBridge PictBridge : Picture Selection PictBridge : Print Setting PictBridge : Reset 100 101 101 091 MP3 / PMP / TEXT VIEWER mode 101 102 092 Starting the MP3 / PMP / TEXT VIEWER mode LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode Using the camera buttons to adjust the camer camera 091 094 095 095 095 095 096 096 097 098 098 098 099 099 099 099 100 100 Downloading files Volume button Play & Pause / Seeking button Delete button Hold / Equalizer button Playlist b
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Package Contents Camera User manual, Product warranty Camera strap AC adapter (SAC-46)/ USB cable (SUC-C2) Software CD (see p.113) Earphones Sold Separately SD/SDHC memory card/ MMC(see p.
Identification of features Front & Top Shutter button Speaker POWER button Microphone AF sensor/ Self-timer lamp Flash Lens 009
Identification of features Back M (Mode) button FR (Face Recognition) button / MP3, PMP hold button Play mode/Print button Camera status lamp Zoom T button (Digital zoom) Earphones jack Zoom W button (Thumbnail) Fn/Delete button LCD monitor Camera strap E (Effect) button 5-function button 010
Identification of features Bottom 5 Function button Battery chamber slot Information/Up button Self-timer/ Right button Flash/ Left button MENU/OK button Tripod socket USB/AV connection terminal Battery holder Memory card slot Macro/Down button Play & Pause button Battery chamber cover 011
Identification of features Self-timer lamp Icon Status Description When the printer is printing Blinking – For the first 8 seconds, the lamp blinks at 1 second intervals. – For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. When the AF activates Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. The lamp is off. The lamp turns on.
Connecting to a power source You should use the rechargeable battery SLB-1137D supplied with the camera. Be sure to charge the battery before using the camera. SLB-1137D rechargeable battery Specification Model SLB-1137D Type Lithium Ion Capacity 1100mAh Voltage 3.7V Charging time (When the camera is turned off) Approx. 150 MIN MP3 Number of images and battery life : Using the SLB-1137D Battery life /Number of images Still image Approx. 115 MIN/ Approx. 230 shots Movie Approx.
Connecting to a power source You can charge the rechargeable battery (SLB-1137D) by using the SAC-46 KIT which consists of the AC adapter (SAC-46) and the USB cable (SUC-C2). When the SAC-46 and SUC-C2 are combined, they can be used as an AC cable. 014 Using an AC cable: Connect the AC adapter to the USB cable. It can be used as a power cable. Using a USB cable: Remove the AC adapter (SAC-46). You can download stored images to your PC (p.
Connecting to a power source How to charge the rechargeable battery (SLB-1137D) Charging LED of the AC Adapter Charging LED Being Charged Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
Connecting to a power source Inserting the memory card Insert the battery as shown. Insert the memory card as shown. – If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). – When the battery chamber cover is opened, do not force it. This may cause damage to the battery chamber cover. - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card Be sure to format the memory card (see p.61) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance.
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards). Card pins When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
When using the camera for the first time Charge the rechargeable battery fully before using the camera for the first time. When the camera is turned on for the first time, a menu will be displayed to set date/time, language and battery type in the LCD monitor. This menu will not be displayed after setting up. Set up the date/time, language and battery type before using this camera. Setting up the language 1.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. ① ② ③ ④ 00013 ⑲ ⑳ No. Description 4 Battery p.16 5 Image Size p.36 6 Image Quality/Frame Rate ⑤ 7 Drive mode/Stabiliser Icons Page p.36 / p.37/40 ⑥ 8 Metering p.38 ⑰ ⑦ 9 ISO p.38 ⑯ ⑧ 10 White Balance p.39 ⑨ 11 Exposure compensation /LongTime Shutter ⑩ 12 Date/Time 13 Contrast 14 Sharpness/Mic.
Starting the Recording mode Selecting modes How to use the Auto mode You can select the desired working mode using the M (Mode) button located on the back of the camera. Select this mode for quick and easy picture taking with minimal user interaction.
Starting the Recording mode How to use the Program mode Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. 1. Select the Program mode by pressing the M (Mode) button (p.21). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image. Refer to page 35-50 for more information about the Program mode menus.
Starting the Recording mode How to use the Movie clip mode A movie clip can be recorded for up to 2hours. 00:30:25 1. Select the Movie clip mode by pressing the M (Mode) button.(p.21) 2. Point the camera towards the subject and compose the image by using the ● Standby LCD monitor. 3. Press the Shutter button once and movie clips are recorded for up to 2hours. Movie clips will still be recorded if the Shutter button is released. If you wish to stop recording, press the Shutter button again.
Starting the Recording mode How to use the Scene modes Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the Scene mode by pressing the M (Mode) button (p.21). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image. 00013 The scene modes are listed below.
Things to watch out for when taking pictures Pressing the Shutter button down half way. Lightly press the Shutter button to confirm focus and flash battery charge. Press the Shutter button all way down to take the picture. Under certain conditions the auto focus system may not perform as expected. – When photographing a subject that has little contrast. – If the subject is highly reflective or shiny.
Focus lock Using the camera buttons to set the camera To focus on a subject not positioned in the centre of the picture, use the focus lock function. The recording mode function can be set up by using the camera buttons. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the Shutter button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject.
FR (Face Recognition) button This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face picture. In MP3 and PMP mode, this button will lock the camera buttons. Selectable modes: Auto, Program, ASR, Scene modes (Portrait, Children, Beach & Snow, Self-shot, Cafe) 1. Press the FR (Face Recognition) button ( ) in the selectable modes. The FR icon will be displayed on the left side of the screen.
ZOOM W / T button If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 5X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 25X. Optical zoom WIDE : Pressing the Zoom W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the Zoom W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
ZOOM W / T button Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. The digital zoom cannot be used in movie clip shots. You may notice a decrease in image quality when using the digital zoom. To view a clearer digital zoom image, press the Shutter button halfway at the maximum optical zoom position and press the Zoom T button again.
Macro ( ) / Down button While the menu is showing, press the Down button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the Macro/Down button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.
Macro ( Flash ( ) / Left button ) / Down button Available focusing method, by Recording mode (: Selectable, ∞: Infinity focus range) Mode Auto macro Super macro Macro Auto macro Selecting the flash mode Mode Normal When the menu is displayed on the LCD monitor, pressing the Left button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the Left button operates as the Flash( ) button. SCENE Super macro Macro 1.
Flash ( ) / Left button 032 If you press the Shutter button after selecting the Auto, Fill-in, Slow synchro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires. Using the flash frequently will reduce the life of the battery. Under normal operating conditions the re-charging time for the flash is usually within 5 seconds. If the battery is weak, the charging time will be longer.
Flash ( ) / Left button Available flash mode, by Recording mode Self-timer ( (: Selectable) ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the Right button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image.
Self-timer ( ) / Right button Selecting the self-timer MENU / OK button – When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. – A menu option can be displayed when the following are selected : Movie clip and Still image mode. There is no menu available when the Voice recording mode is selected. 1. Select a Recording mode with the 00013 exception of Voice recording mode. (p.21) 2.
Fn button You can use the Fn button to set the following menus. (: Selectable) Page Size p.36 Quality/ Frame Rate p.36 Drive Metering 1. Press the Fn button in an available mode 2. Select a desired menu by pressing the Up/Down button. And then a sub menu will be displayed on the bottom left side of the LCD monitor. FINE 8M 3264x2448 p.37 Up/Down button p.38 ISO White Balance p.39 EXPOSURE VALUE p.
Size Quality / Frame rate You can select the image size appropriate for your application. You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Drive mode You can select continuous shot, and AEB (Auto Exposure Bracketing). Single Icon Drive Mode [Single] Description Take one picture only. Images will be taken continuously until the Shutter [Continuous] button is released. [Motion Capture] [AEB] This takes 6 shots per second for up to 5 seconds, when the shutter is pressed and held down. After completing the continuous shooting, images are saved automatically. The maximum number of shots is 30 and the image size is fixed as VGA.
Metering ISO If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. multi AUTO Icon Metering Mode [Multi] Description Exposure will be calculated based on an average of light in each image area divided into multiple regions. However, the calculation will be biased towards the centre of the image area.
White balance The white balance control allows you to adjust the colours to appear more natural. AUTO Icon White balance Mode Description [Auto WB] The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions. [Daylight] For taking images outside. For taking images under a cloudy and overcast sky. For shooting under daylight fluorescent types [Fluorescent_H] of threeway fluorescent lighting.
Exposure compensation Long time shutter This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the Fn button. This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in Night scene mode, you can set the shutter speed and aperture values to your preference. Compensating Exposure 1.
E (Effect) button It is possible to add special effects to your images by using this button. Still image mode: You can select the colour, special colour, image editing and Fun menu. In the Auto mode, you can select the [COLOR] menu only. Movie clip mode: You can select the colour menu. Available Effects, by Recording mode (: Selectable) This button will not operate in ASR, Voice recording mode and some scene modes ([NIGHT], [TEXT], [SUNSET], [DAWN], [BACKLIGHT], [FIREWORK], [BEACH&SNOW]).
E (Effect) button : Colour By using the camera’s digital processor, it is possible to add special effects to your images Press the E button in an available recording mode. (p.41) COLOR Custom Color: You can change the R (Red), G (Green) and B (Blue) values of the image. Custom Color COLOR Move – Up/Down button: Selects R, G, B – Left/ Left Right button: Changes the values Move E Exit Move E [Normal] Description No colour effect is added to the image.
E (Effect) button : Colour Mask With this menu, you can select a part you want to highlight. The rest of the image will be black and white. Press the E button in an available recording mode. (p.41) 00013 00013 Color Mask Press the OK button and the Mask mark will be displayed on the LCD monitor. E SH Capture OK Set Back Press the Fn button. You can change the size and location of the mask.
E (Effect) button : Saturation You can change the saturation of the image. Press the E button in an available recording mode. (p.41) IMAGE ADJUST Move Saturation E Exit Select Saturation ( ) menu and a bar for changing the saturation will be displayed. Change the saturation by pressing the Left/Right button. Move OK Set Saturation Bar for changing the saturation Move 00013 Press the Shutter button to take a picture.
E (Effect) button : FUN Cartoon You can add a text box to the image to make the image cartoon like. The size of Cartoon image is fixed to 1M. Press the E button in an available mode. (p.41) 00013 FUN Press the Fn button and select a desired text box position by pressing the Left/Right button. Cartoon Select Cartoon ( E Move Exit SH Capture OK Set Frame 00013 SH Capture Select a desired frame by pressing the Left/Right button and press the OK button. ).
E (Effect) button : FUN Changing the cartoon image before taking the last shot Before saving the cartoon image, you can take images again. 1. Select an image to delete by using the Left/ Left Right button. 2. Press the Fn button and the image deletes. 00013 OK Save 00013 Fn Delete Pressing the Fn button SH Capture 3. To take a new image, press the Shutter button.
E (Effect) button : FUN Photo Frame You can add 9 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. The size of Photo Frame image is fixed to under 5M. Press the E button in an available recording mode. (p.41) Photo Frame FUN E Move Frame Exit OK Set Pressing the OK button . 00013 00013 Pressing the Fn button. SH Capture Move SH Capture Fn Edit 1.
E (Effect) button : FUN Pre-set focus frame You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. The size of High Light image is fixed to under 5M. Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 00013 00013 Press the E button in an available recording mode. (p.
E (Effect) button : FUN Composite shooting 00013 You can combine 2 - 4 different shots in a still image. The size of Composite image is fixed to under 5M. Selecting 2 composite shots 00013 Pressing the Shutter button. Press the E button in an available recording mode. (p.41) FUN Composite SH Capture SH Capture Fn Delete Pressing the Shutter button. E Move Composite Exit OK Set 00013 00013 1.
E (Effect) button : FUN Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the Fn button. 2. A previous image will be deleted and new frame will be displayed. To delete a previously taken image, press the Fn button again. 00013 00013 Changing a part of composite shot after taking the last shot After taking the last shot, you can change a part of the composite shot. 1.
Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. The items indicated by Menu Sharpness Contrast Sharpness You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. are default settings.
Contrast You can set the difference between bright part of the image and dark part of the image. RECORDING Sharpness Contrast Focus Area Voice Memo Voice Record Back Contrast [High] [Normal] [Low] 052 Focus Area You can select your preferred Focus Area according to the shooting conditions. RECORDING Sharpness Contrast Focus Area Voice Memo Voice Record High Normal Low OK Set Back Description Focus Area The image contrast is high. [Center AF] The contrast is normal.
Voice Memo You can add your voice-over to a stored still image. (Max. 10 sec.) Voice recording A voice can be recorded for as long as the available recording time (Max. 10 hour) allows. RECORDING Sharpness Contrast Focus Area Voice Memo Voice Record Off On OK Set Back – If the voice memo indicator is displayed on the LCD monitor, the setting is completed. 00013 – Press the Shutter button and take a picture. The picture is stored on the memory card.
Recording the movie clip without voice Sound menu You can record the movie without voice. In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice recording mode. Select [Voice Mute] menu in the Movie clip mode. ( ) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice. RECORDING Voice Mute Off On The items indicated by Mode Menu are default settings.
Sound ( ) Volume You can set select a volume of start up sound, shutter sound, beep sound and AF sound. – [Volume] sub menu : [Off], [Low], [Medium], [High] Beep Sound SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound Back Off Low Medium High OK Set If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice recording mode. The items indicated by are default settings. Menu tab Main menu File Language Menu tab Main menu Sub menu Page Reset Series World Time p.
SETUP1( ) File name Language This function allows the user to select the file naming format. There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. File name [Reset] [Series] Description After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card.
SETUP1(( ) World time Imprinting the recording date The date and time selected in the [Date&Time] serve as the date and time of your present location. Setting [World Time] enables you to display the local date and time on the LCD monitor when travelling overseas. There is an option to include DATE/TIME on still images.
SETUP1(( ) SETUP2( ) Auto focus lamp Quick view You can turn on and off the Auto Focus lamp. If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. – Sub menus [Off] : The AF lamp will not light up in low light conditions. [On] : The AF lamp will light up in low light conditions.
SETUP2( 2( ) Auto power off Selecting video out type This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
SETUP2( 2( ) Formatting a memory If you run [Format] on the memory, all files which are image, video clip, multimedia, world tour guide and even protected images will be deleted. So be sure to download important files to your PC before formatting the memory. – Sub menus [No]: The memory will not be formatted. [Yes]: A window for confirming the selection displays. Select the [Yes] menu. A [Processing!] message appears and the memory will be formatted.
SETUP2( 2( ) Starting play mode Initialisation All camera menu and function settings will be restored to their default values. However, values for Date/Time, Language, and Video will not be changed. – Sub menus [No]: Settings will not be restored to their defaults. [Yes]: A window for confirm the selection displays. Select the [Yes] menu and all settings will be restored to their defaults.
Starting play mode Playing back a movie clip 1. Select the recorded movie clip that 100-0031 you want to play back by using the Left Right button. Left/ 2. Press the Play & Pause ( ) button to playback a movie clip file. – To pause a movie clip file while 00:00:02 playing it back, press the Play & E Capture Play Pause ( ) button again. – Pressing the Play & Pause ( ) button again will cause the movie clip file to restart. – To rewind the movie clip while it is playing, press the Left button.
Starting play mode Playing back a recorded voice On camera movie trimming You can extract desired frames of movie clip during the movie clip play back. If the running time is under 10 seconds, the movie clip can’t be trimmed. 1. Press the Play & Pause ( ) button at the point of the movie clip where you want to start extracting. 2. Press the T button. 3. Press the Play & Pause ( ) button and the extracted range will be displayed on the status bar. 4.
Starting play mode LCD monitor Indicator Playing back a voice memo The LCD monitor displays shooting information about the displayed image. ① ② ③ ④ 1. Select a still image that has the voice memo. 2. Press the Play & Pause ( ) button to play back the voice memo. – To pause the voice memo, while playing it back, press the Play & Pause ( ) button again. – To resume playback of the voice memo, press the Play & Pause ( ) button.
Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Play mode button Thumbnail( ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. In the MP3, PMP, Text Viewer, Movie Clip mode and when playing back the recorded voice, you can control the volume of multimedia files.
Using the camera buttons to set the camera Image enlargement 1. Select an image that you want to enlarge and press the Enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the Thumbnail button will zoom back to the original full sized image. – You can tell whether the image displayed is an enlarged view by x 2.0 checking the image enlargement indicator shown at the top left of the LCD monitor.
Info ( ) / Up button Play & Pause ( When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info( ) button will display image information on the LCD monitor. 100-0031 100-0031 Info ( ) button ISO AV TV Flash Size Date 80 3.
Left / Right / Menu / OK button Delete ( ) button Left Right/ Left/ Right MENU/OK OK button activate the following. This deletes images stored on the memory card. – Left button: While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. – Right button: While the menu is showing, the Right button operates as a direction button. While the menu is not showing, press the Right button to select the next image.
E (Effect) button : Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. – Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized. 1. Press the Play mode button and press the E button. 2. Press the Left/ Left Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button.
E (Effect) button : Rotating an image E (Effect) button : Colour You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. It is possible to add colour effects to your images by using this button. 1. Press the Play mode button and press the E button. 2. Press the Left/ Left Right button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/ Down button. 2.
E (Effect) button : Colour E (Effect) button : Special colour 1. Press the Play mode button and press the E button. Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image. 2. Select ( Custom Color ) menu tab by pressing the Left/ Left Right button. Colour Filter With this menu, you can change the colour information of the image (excluding Red, Blue, Green and Yellow) to Black and White.
E (Effect) button : Special colour Colour mask With this menu, you can select a part you want to highlight. The rest of the image will be in black and white. Color Mask Press the OK button and you can set the size and location of the part. Select ( ) and a mark for selecting part will display.
E (Effect) button : Image editing Contrast control 1. Press the Play button and press the E button. 2. Select ( ) menu tab by pressing the Left/ Left Right button. You can change the contrast of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the contrast will be displayed. 2. Change the contrast by pressing the Left Right button. Left/ 3. Press the OK button and the image will be saved as a new file name.
E (Effect) button : FUN Cartoon You can add a text box to the image to make the image cartoon like. The cartoon image is saved as 1M image size. FUN Cartoon Select Cartoon ( ). E Move Select a desired frame by pressing the Left/ Left Right button and then press the OK button. Exit Frame OK Set Select a desired position by pressing the Up/ Down/Left/ Left Right button Left/ and press the OK button.
E (Effect) button : FUN Before saving the cartoon image, you can change the selected image. Changing the cartoon image before taking the last shot 1. Pressing the Fn button deletes the images in order. 2. Press the OK button and you can select images. Photo Frame You can add 9 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. The Photo Frame image is saved as under 5M image size.
E (Effect) button : FUN Preset focus frames You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus.The High Light image is saved as under 5M image size. High Light FUN E Exit Move Range OK Set Select a desired frame by pressing the Left/ Left Right button and press the OK button. High Light Range High Light OK Set Press the OK button and the image is saved.
E (Effect) button : FUN Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left/ Left Right button and press the OK button. 2. Move the location of the frame by pressing the Up/Down/Left/ Left Right Left/ button. 3. Press the OK button and the file is saved as a new file name. Composite image You can combine 2 - 4 different shots in a still image.
E (Effect) button : FUN Selecting 2 composite shots Pressing the Up/Down/Left/ Left Left/ Right button. ◀ ▶ Move OK Set Before selecting the last composite image, you can change a part of composite image. 1. During the composite image editing, press the Fn button. 2. A previous image will be deleted. Press the OK button and you can select a new image. After selecting an image, press the Fn button again and the image will be deleted again.
E (Effect) button : FUN Setting up the play back function using the LCD monitor Sticker Play mode functions can be changed by using the LCD monitor. In the Play mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or Shutter button. You can add various stickers to the image. The Sticker image is saved as 1M image size. Sticker FUN Select ( E Move ).
Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu Tab Main Menu Images Size Layout Sub Menu Sub Menu One Pic – All Pics – Auto – PostCard Page Menu Tab Main Menu p.
Starting the slide show ( ) Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the Play mode button and press the MENU button. 2. Press the Left/ Left Right button and select the [SLIDE SHOW] menu tab. Start the slide show The slide show can start only in the [Show Start] menu. 1. Use the Up/Down button to select the [Show Start] menu and press the Right SLIDE SHOW Show Start Play button. Image Repeat Play 2.
Starting the slide show ( ) Configure slide show effects Unique screen effects can be used for the slide show. SLIDE SHOW Show Start 2. Use the Up/Down button to select the desired interval. 3. Press the OK button to save the configuration. Off 1. Select the [Effect] sub menu by pressing Image Basic Classic Effect the Up/Down button and press the Memories Interval Right button. Rhythmic Music Delight 2. Use the Up/Down button to select the OK Set Back type of effect. 3.
Playback ( ) Voice memo You can add your voice to a stored still image. PLAYBACK Voice Memo Off Protect On Delete DPOF Copy To Card 00:00:00 Back OK Set 00:00:06 SH Start SH Stop – Press the Shutter button to take a picture. The images are saved on the memory. After saving the image, the voice is recording for 10 seconds. – To stop the recording, press the Shutter button.
Playback ( ) – OK button: Press the OK button to display the confirmation message. Select the [Yes] menu and press the OK button to delete marked images. [All]: Displays confirmation window. Select the [Yes] menu and press the OK button to delete all unprotected images. If there are no protected images, all the images are deleted and a [No Image!] message will display. 3. After deletion, the screen will be changed to the play mode screen.
Playback ( ) Standard This function allows you to embed printing quantity information on a stored image. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will display. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. [Select]: Selection window for an image to print is displayed. – Up/Down/Left/ Left Right button: Select Left/ an image to print.
Playback ( ) Print size You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press Select Standard the Right button. All Index 2. Press the Right button again and select Size Cancel the [Size] sub menu will be displayed. 3. Select a desired sub menu by pressing OK Set Back the Up/Down button and press the OK button.
Playback ( 088 ) When this menu is selected without inserting a memory card, the [No Card!] message will be displayed. If there is not enough space available in the memory card to copy saved images in the internal memory (190MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the Playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.
PictBridge If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do the step 1 and 2 again. Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. – Pressing the Left/ Left Right button : Selects a previous / next image.
PictBridge : Print Setting PictBridge : Reset You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Initialises user-changed configurations. 1. Press the MENU button and the PictBridge menu will be displayed. 2. Use the Up/Down button to select the desired menu, and then press the Right button. PICTBRIDGE Images Size Layout Type Quality Date ◀ ▶ ▶ ▶ ▶ ▶ ▶ Back 3.
MP3 / PMP / TEXT VIEWER mode This camera has an embedded MP3, TEXT VIEWER & Portable Media Player program. You can take a picture, listen to the MP3 files and watch the movie clip (Movie and Video clip) whenever you want. To use the PMP mode, you must convert the multimedia file with the Samsung Converter. In the TEXT VIEWER mode you can see the text on the LCD monitor with listening MP3 music. If the file or folder name is over 120 (Including 1 Byte/2 Byte language, Korean, Chinese, etc.
Starting the MP3 / PMP / TEXT VIEWER mode Take care of the illegal duplication of MP3 & multimedia files. It violates various copyright laws. This camera can only play back MP3 files in the MP3 mode and SDC files (modified XviD MPEG4 video / MPEG Layer2 audio type) in the PMP mode. If a file can not be played back on this camera, convert it into the supported file format by using the Samsung Converter. (p.121~122) Up to 200 files and 100 sub folders can be saved in a folder.
Starting the MP3 / PMP / TEXT VIEWER mode 03-Audio Track 03.mp3 01-Audio Track 01.mp3 Move OK Select SDC]-move sample.sdc Move Who bent my camera? OK Select TEST.TXT TEST.TXT Thank you for buying a Samsung Camera. This manual will guide you through using the camera, includin capturing images, downloading images and using the application software. Please read this manual carefully before using your Move OK Select new camera.
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode The LCD monitor displays information about the MP3, multimedia and Text file. MP3 mode Battery (p.16) Playing time Lock (p.96) Mute (p.95) TEXT VIEWER mode Battery (p.16) Bit rate (p.93) Playback mode (p.98) Title of file Time line Status bar Volume (p.95) Who bent my camera? 094 Caption (p.121) using the application software. new camera. Play & Pause/ Seeking button (p.
Using the camera buttons to adjust the camera Volume button Delete button You can control the volume with this button. There are 0 ~ 30 steps. This deletes files stored on the memory. – Mute ( ): You can mute the MP3 sound with the Up button. Play & Pause / Seeking button When a file is playing back, press the Down button to pause the file. Pressing it again will resume playback. MP3 mode When an MP3 file is not played back, you can search the MP3 files by pressing the Left/ Left Right button.
Using the camera buttons to adjust the camera Hold / Equalizer button If you press the Hold button for over 1 second, the camera buttons are locked. – If the camera buttons are locked, the buttons can’t be operated while playing back. But Power off, Video out, USB connection and LCD on functions can be operated. Playlist button While a multimedia file is playing back, you can select a desired file by using the browsing menu. 1. While a multimedia file is playing back, press the Playlist ( ) button. 2.
Setting up the playback function using the LCD monitor MP3 / PMP / Text Viewer mode functions can be changed by using the LCD monitor. Press the MENU button and the menu will be displayed on the LCD monitor. Menu tab Main menu MP3 Off Play All Repeat One Play Mode Repeat All Random MP3 Skin Delete All Resume Seeking Menu Main menu tab Page On Slide Show PMP Sub menu Resume p.98 Resume p.
Setting up the playback function using the LCD monitor Resume Play mode You can set the playback type. You can set various repeat and shuffle options. This function is adopted only in the selected folder. 1. Press the MENU button in each mode. 2. Select a desired playing type in the [Resume] menu by pressing the Up/Down button and pressing the OK button.
Setting up the playback function using the LCD monitor Playing back the slide show Delete all While the MP3 file is playing back, captured images are displayed on the LCD monitor continuously. All files stored on the memory card will be deleted. In the MP3 mode, only MP3 files are deleted. In the PMP mode, only multimedia files are deleted. In the TEXT VIEWER mode, TEXT files are deleted. [Play]: Display the images once. [Repeat Play]: Display the images continuously.
Setting up the playback function using the LCD monitor Display setting You can set the play back function display on the LCD. [5 sec]: If there is no operation during 5 seconds, Menu bar will Player Display 5 sec disappear. Off [On]: Menu bar will appear on the LCD On monitor. [Off]: Menu bar will not appear on the EXIT MOVE LCD monitor. To see the caption, insert the caption file (.smi) by using the Samsung Converter. (p.
Setting up the playback function using the LCD monitor MP3 BGM Setting You can play MP3 files when you are playing the text. [Off]: [On]: You cannot play the MP3 files. When you are playing the text, you can play the MP3 files. The last played MP3 files will be executed. MP3 BGM You can get the useful travel information around the world. The travel information supports for Korean, English, Chinese, German and French, and the language can vary depending on sales region.
World tour guide World Tour Guide mode Select the World Tour Guide mode SHOOTING MULTIMEDIA TOUR GUIDE TEXT VIEWER MP3 SCENE Fn Back Fn OK Select Select the desired tour site by pressing the Up/Down/Left/ Left Right Left/ button and press the OK button. Starting the world tour guide Back E Info Select the tour place by pressing the Left/ Left Right/ Right Up/Down button. You can find the detail information and pictures. Move Check the images by pressing the T button.
World tour guide You can select desired function. 3 Select [Yes] to add bookmark. You can confirm the added bookmark in the Bookmark list. Bookmark World time Bookmark list Information Language BOOKMARK Do you want to bookmark this region? No Sound Yes Move Exit Move MENU Bookmark list [Bookmark list]: Select the [Bookmark list] on the menu bar and the bookmark list will appear. – Press the MENU button to display the tour guide information.
World tour guide Saving the information of some sites may take long time. Save each information of sites in order. If the downloaded files are changed by any non-official methods, the files don’t playback on the camera. Formating the camera deletes all data on the memory (including protected images, Movies, Multi media files and Tour Information). Copy the files to a computer before formating the memory.
Important notes – This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. – If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error ! ] • Memory card error. Turn off the camera power and turn it on again. Insert the memory card again. Insert and format the memory card. (p.61) [ Card Locked! ] • The memory card is locked. SD/SDHC memory card : Slide the write protect switch to the top of the memory card. [ No Card! ] • A memory card is not inserted. Insert the memory card again. Turn off the camera power and turn it on again.
Before contacting a service centre Please check the following. The camera doesn’t switch on. • There is low battery capacity. Insert fresh batteries. (p.16) • Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use. • The battery is exhausted. Insert fresh batteries. • The Camera is turned off automatically. Turn on the camera power again. Battery power quickly drains.
Before contacting a service centre The images are unclear. • A picture was taken of a subject without setting an appropriate macro mode. Select an appropriate macro mode to take a clear image. • Taking a picture beyond the flash range. Take a picture within the flash range. • The lens is smudged or dirty. Clean the lens. The flash does not fire. • Flash off mode has been selected. Dis-engage flash off mode. • The camera mode can’t use the flash. Refer to the FLASH instruction. (p.
Specifications Image Sensor – Type: 1/2.5” CCD – Effective Pixel : Approx. 8.2 Mega-pixel – Total Pixel : Approx. 8.4 Mega-pixel Lens – Focal Length : NV Lens f = 6.0 ~ 30.0mm (35mm film equivalent : 36 ~ 180mm) – F No. : F3.5 ~ F3.9 (Wide) F4.9 ~ F8.0 (Tele) – Digital Zoom : Still Image mode : 1.0X ~ 5.0X Play mode : 1.0X ~ 12.8X (depends on image size) LCD Monitor – 3.
Specifications – Movie Clip • With Audio or without Audio (Max 2 Hours) • Size : 800x592, 640x480, 320x240 • Frame rate: 30 fps, 20 fps, 15 fps (20 fps for 800x592) • Optical Zoom up to 5.
Specifications Interface – – – – Digital output connector : USB 2.0 High Speed Audio : Mono Video output : NTSC, PAL (user selectable) DC Adapter : 24 pin connector Power Source – Rechargeable battery : SLB-1137D, 3.7V (1100mAh) – Adaptor : SAC-46, SUC-C2 Included battery may vary depending on sales region. Dimensions (WxHxD) – 95 X 61.5 X 20.
Specifications Please ensure that you read the instruction manual carefully before use. Text Specification File – TXT extension name, up to 99999 pages File format – Window : ANSI (Windows 98 or later), Unicode / Unicode (Big-Endian) / UTF-8 (Windows 2000/XP) – Mac : ANSI, Unicode (UTF-16) Function – – – – Language – English, Korean, French, German, Spanish, Italian, Chinese, Taiwanese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Bahasa, Polish, Hungarian, Czech, Turkish.
About the software System requirements For Windows PC with processor better than Pentium II 450MHz (Pentium 800MHz recommended) * Samsung Converter PC with processor better than Pentium 500MHz (Pentium IV recommended) For Macintosh After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver.
About the software Setting up the application software Samsung Converter: Multimedia converting program To use this camera with a PC, install the application software first. Multimedia (Movie, Video clip, etc) files can be converted into movie clips that can be played back on this camera. This software is only compatible with Windows. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program.
Setting up the application software 3. To play back the movie clip recorded with this camera on the computer, install the XviD codec. The XviD codec is distributed according to the GNU General Public License and everyone can copy, distribute and change this codec. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. For more information, see the License documents (http://www.
Setting up the application software 4. Install the software by instructions on the monitor. 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP/ Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully.
Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to “computer connection mode”. In this mode, you can download stored images to your PC through the USB cable. Connecting the camera to a PC If you selected [Printer] in Step 5, when you connect the camera to your computer, the [Connecting Printer] message will be displayed and the connection will not be established.
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. – [Cut] : cuts a selected file. – [Copy] : copies files. 1. Connect the camera to your PC with the USB cable. 2. On your computer’s desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 5.
Starting PC mode – By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection.
Removing the removable disk 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.1 ~ 10.4. 3.
Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 4. Disconnect the USB cable. 5. Remove the [Samsung USB Driver] on the Add/Remove Programs Properties. Samsung Converter Multimedia (Movie, Video clip, etc) files can be converted into movie clips that can be played back on this camera.
Samsung Converter 7. You can play back the converted movie clip in the Play mode of the camera. Refer to the [Help] menu in Samsung Converter for further information. Who bent my camera? Before converting a multimedia file, check whether it plays back correctly on the Windows Media Player. The converted files are saved as *.sdc file type that can be played back on the Windows Media Player. The Samsung Converter doesn’t cover every kind of codec.
Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To run the Samsung Master, double click the Samsung Master icon on the desktop. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. – To download the captured images, select the [Select All] button. – Select desired folder in the window and click the [Select All] button.
Samsung Master Image viewer : You can view the stored images. – Image viewer functions are listed below. ① Menu bar: You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ② Image selection window: You can select the desired images in this window. ③ Media type selection menu: You can select image viewer, image edit and movie edit functions in this menu. ④ Preview window: You can preview an image or a movie clip and check the multi media information.
Samsung Master Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ② Frame display window : You can insert multi media in this window. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Samsung Master. Refer to the [Help] menu in Samsung Master for further information. – Movie clip edit functions are listed below. ① Edit menu:You can select the following menus.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ When the movie clip doesn’t play back on the PC [Installing codec for Mac OS] 1) Visit the following site for downloading the codec. (http://www.divx. com/divx/mac) 2) Click the [Free Download] menu on the top right side of the window then download windows appears. 3) Check the version of Mac OS and click the [Download] button to download the file and save it on a desired folder. 4) Run the downloaded file and the codec for playing back the movie clip will be installed.
FAQ If a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer.
FCC notice NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8222, 8488, 8490 FAX : (82) 31-740-8398 www.samsungcamera.
